-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi again, > > I tried to find out the correct settings and I've seen that the Asus > > tool for watching the sensors is using a switch fan_div 4 and I tried > > that to set for the AS99127F settings in /etc/sensors.conf > > What tool are you talking about? SmartDoctor2? How could you seen the > flag there? I used "Motherboard Monitor 5", downloaded from http://mbm.livewiredev.com/ to examine if the fan monitoring is available for any monitoring tool. well, it is and so I thought, I should play a bit with the dividor settings like seen in MBM. > > What shell I say, it works and the fan speed is identic to that what > > my bios itself shows up in Hardware monitoring. > > OK, great. > > > CPU FAN: 2327 RPM (min = 1328 RPM, div = 4) > > (...) > > and here is the /etc/sensors.conf: > > (...) > > set fan1_min 1800 > > set fan1_div 4 ### this is what I changed so far > > Well, you ask for 1800 and you get 1328, it's far from being perfect. > However, as mentioned in our FAQ, we won't try to fix the driver until > Asus releases a datasheet. sure, its far from beeing perfect, but the RPM itself is shown with a correct value, just the limits are not shown as the settings would expect. I didnt realize that so far :) ok, anyway, thx a lot for your great work, we'll see what asus will do in the future with their behavior about giving datasheets or not... Another output to show, I'm a bit confused. I did again a "sensors -s" like yesterday, but now, without any changes to sensors.conf I got this: (root at athlon) ~$ sensors -s (root at athlon) ~$ sensors as99127f-i2c-0-2d Adapter: SMBus Via Pro adapter at e800 Algorithm: Non-I2C SMBus adapter [...] - -5V: -4.03 V (min = -5.24 V, max = -4.74 V) ALARM CPU FAN: 2311 RPM (min = 1795 RPM, div = 4) [...] setting is still 1800, I got 1795, I think its ok so far. sincerly Markus Pillmann - -- InternetService Rotenburg http://www.i-service.de // info at i-service.de Tel: +49 (0)4261-819687 // Fax: +49 (0)4261-819688 - -= Quality Webhosting in Germany =- -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/Lk0Y6BKF9iWmmLwRAoAOAKDn+4XZf7hdeVmPVl4M7ayDkZVA5gCgoLC8 t6XXqdH58FF/RjdqCp0akd0= =wNXA -----END PGP SIGNATURE-----
