On Sunday 03 August 2003 04:56, Jean Delvare wrote:
>> I see. I think. So to build against the kernel being built, I
>> would make this line read
>> LINUX :=/usr/src/linux
>> since this link will be valid for the kernel being built.
>
>You got it.
>
>> Then I ran sensors-detect, Everything worked except it detected
>> an lm75 instead of an adm1021 for the temp stuffs. As I already
>> had an old line to bring it in with an option adm1021 line in
>> modules.conf so it would ignore one potential address, canceling
>> the lm75 and re-enabling the adm1021 modload in rc.local made
>> everything work again.
>
>I guess your ADM1021 is in fact a MAX1617, which is hard to detect,
> as the LM75 is. However, we have been improving detection for the
> lm75 and the adm1021 families, so I'd expect that thing will be
> better with lm_sensors-2.8.0. BTW, I'm a bit astonished that a
> non-LM75 chip could ever be detected as a LM75 with the detection
> procedure we use. What is possible is that you have both an LM75
> and an adm1021-like chipset. Most motherboards that use a LM75 use
> it as a secondary chip, and have another chip as their primari
> monitoring chip.
I think I've seen a reference to that MAX1617, but no idea where now.
The lm75 output was of course 0C.
[root at coyote root]# lsmod.old
WARNING: lsmod.old: I am not the old version!
Module Size Used by
qcamvc_usb 4252 0 (autoclean) (unused)
qcamvc 13528 0 [qcamvc_usb]
videodev 6208 1 (autoclean) [qcamvc]
nvidia 1624576 11 (autoclean)
via8233 8800 2
pnp 49620 2 [via8233]
ac97 16384 2 [via8233]
soundbase 567520 2 [via8233 pnp ac97]
sndshield 10636 0 [via8233 pnp ac97 soundbase]
eeprom 3508 0
adm1021 5624 0 (unused)
i2c-viapro 3760 0 (unused)
w83781d 19312 0
i2c-proc 6992 0 [eeprom adm1021 w83781d]
i2c-isa 1096 0 (unused)
i2c-core 14472 0 [eeprom adm1021 i2c-viapro w83781d
i2c-proc i2c-isa]
>Anyway, please let us know how it goes with 2.8.0.
>
>> But, I think I've got some hardware problems, and suspect they are
>> only going to be cured by replacing my athlon cpu with a barton
>> cored unit, this DX-1600 has been running at 170F or more, .100
>> volts low on its core vcc for going on 3 years now, and several of
>> my reboots hung either at the post stage just before the memory
>> scan, and once it spontainously rebooted when the viapro module
>> was modprobed. Gawd I hate flaky hardware... I have a friend
>> with a barton cored athlon DX-2400 that rarely exceeds 120F, and
>> then only when doing mpeg2 smunching.
>
>170F is a bit hot for sure, you must have some serious heatsink/fan
>issue. No wonder your system may be a bit unstable. And you really
> need lm_sensors working on such a system ;)
And thats with thermaltake's best all copper big fan cooler on it.
Sensors currently says:
[root at coyote root]# sensors
w83697hf-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore: +1.66 V (min = +0.00 V, max = +0.00 V)
+3.3V: +3.26 V (min = +2.97 V, max = +3.63 V)
+5V: +4.99 V (min = +4.50 V, max = +5.48 V)
+12V: +12.39 V (min = +10.79 V, max = +13.11 V)
-12V: -12.39 V (min = -13.21 V, max = -10.90 V)
-5V: -5.36 V (min = -5.51 V, max = -4.51 V)
V5SB: +5.44 V (min = +4.50 V, max = +5.48 V)
VBat: +3.21 V (min = +2.70 V, max = +3.29 V)
fan1: 5273 RPM (min = 187 RPM, div = 32)
fan2: 0 RPM (min = 187 RPM, div = 32)
temp1: +69?C (limit = +60?C) sensor =
thermistor ALARM
temp2: +208.0?C (limit = +60?C, hysteresis = +50?C) sensor =
thermistor
alarms:
beep_enable:
Sound alarm disabled
eeprom-i2c-1-50
Adapter: SMBus Via Pro adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
Memory size (MB): 256
eeprom-i2c-1-51
Adapter: SMBus Via Pro adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
Memory size (MB): 256
---
There is no temp2 thermistor on this board.
and
---
[root at coyote root]# lsmod.old
WARNING: lsmod.old: I am not the old version!
Module Size Used by
qcamvc_usb 4252 0 (autoclean) (unused)
qcamvc 13528 0 [qcamvc_usb]
videodev 6208 1 (autoclean) [qcamvc]
nvidia 1624576 11 (autoclean)
via8233 8800 2
pnp 49620 2 [via8233]
ac97 16384 2 [via8233]
soundbase 567520 2 [via8233 pnp ac97]
sndshield 10636 0 [via8233 pnp ac97 soundbase]
eeprom 3508 0
adm1021 5624 0 (unused)
i2c-viapro 3760 0 (unused)
w83781d 19312 0
i2c-proc 6992 0 [eeprom adm1021 w83781d]
i2c-isa 1096 0 (unused)
i2c-core 14472 0 [eeprom adm1021 i2c-viapro w83781d
i2c-proc i2c-isa]
---
And I thought I had that warning bs fixed :(
>
>Good luck with your hardware.
--
Cheers Jean, Gene
AMD K6-III at 500mhz 320M
Athlon1600XP at 1400mhz 512M
99.27% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2003 by Maurice Eugene Heskett, all rights reserved.
