Dne po 28. ?ervence 2003 22:38 jste napsal(a): > > after reinstall ne1619 driver are values of min/max voltage 0. > > > > e.g. > > > > +2.5V: +2.48 V (min = +0.00 V, max = +0.00 V) > > My bad, fixed in the attached version. Can you please try again? (No > need rebooting this time, just unload the old module and load the new > one instead.) problem solved ... > > btw: speed of fan can show lm_sensors with ne1619 too? > > Negative on that, it's a 6-voltage 2-temperature chip, period. No fan > monitoring. I'm surprised too, but that's how it it. I'm not sure if I understand you. Intel sw can show fan speed, e.g. Sensor Name System Fan 1 Current Value 3 840 Upper Threshold not applicable Lower Threshold 500. Current driver cannot show that or something else? > > OK, current values are: > > > > alarms 0 > > in0 0.00 0.00 2.48 > > in1 1.40 1.55 1.46 > > in2 0.00 0.00 3.33 > > in3 0.00 0.00 5.02 > > in4 0.00 0.00 0.00 > > in5 0.00 0.00 3.26 > > temp1 0.0 0.0 43.0 > > temp2 0.0 0.0 43.0 > > vid 1.500 > > vrm 9.0 btw: hippopotamus:/proc/sys/dev/sensors/adm1025-i2c-0-2d# ls alarms in0 in1 in2 in3 in4 in5 temp1 temp1 temp2 vid vrm hippopotamus:/proc/sys/dev/sensors/adm1025-i2c-0-2d# cat temp1 cat: temp1: nen? adres??em (= temp1 in't directory ...) temp2 is normal proc file with values ... there are two files "temp1" in this directory, but i didn't reboot ... > Bad of course because of the bug... Oh, please provide the output of > "sensors" too (almost similar, but much more pleasant to read, isn't > it). > > Thanks! you're welcome ... adm1025-i2c-0-2d Adapter: SMBus I801 adapter at efa0 Algorithm: Non-I2C SMBus adapter +2.5V: +2.48 V (min = +2.23 V, max = +2.74 V) VCore: +1.46 V (min = +1.40 V, max = +1.55 V) +3.3V: +3.33 V (min = +2.95 V, max = +3.62 V) +5V: +5.02 V (min = +4.47 V, max = +5.49 V) +12V: +0.00 V (min = +10.75 V, max = +13.18 V) VCC: +3.26 V (min = +2.95 V, max = +3.62 V) SYS Temp: +43.0?C (min = +0?C, max = +60?C) CPU Temp: +42.0?C (min = +0?C, max = +60?C) vid: +1.50 V -- Ondrej Cecak
