Hi, Thank's for the fast reply and now i might hav another silly question. How can i pick out the "temp2" value from sensors then? With the sensors command: temp2: +40.0?C (limit = +67?C, hysteresis = +60?C) but with the: head -1l /proc/sys/dev/sensors/as99127f-i2c-0-2d/temp2 [[A60.0 50.0 22.0 H?kon. |---------+----------------------------> | | "Mark D. | | | Studebaker " | | | <mds at paradyne.com| | | > | | | | | | 21.07.2003 02:32 | | | Please respond to| | | LM Sensors | |---------+----------------------------> >-----------------------------------------------------------------------------------------------------------------------| | | | To: haakon at apelseth.com | | cc: sensors at Stimpy.netroedge.com | | Subject: Re: Lm-sensors 2.8.0 on Asus P3B-F | >-----------------------------------------------------------------------------------------------------------------------| Not a bug. the values in /proc are the raw values returned by the driver. the values from 'sensors' are converted by the libsensors library using the 'compute' lines in /etc/sensors.conf. haakon at apelseth.com wrote: > > > > Hi, > > I'm having a bit strange result with Lm-sensors v2.8.0. > It look's ok when i just use "sensors" > > like this: > # sensors > as99127f-i2c-0-2d > Adapter: SMBus PIIX4 adapter at e800 > Algorithm: Non-I2C SMBus adapter > VCore 1: +1.64 V (min = +4.08 V, max = +4.08 V) ALARM > VCore 2: +2.59 V (min = +4.08 V, max = +4.08 V) ALARM > +3.3V: +3.47 V (min = +3.13 V, max = +3.45 V) ALARM > +5V: +5.16 V (min = +4.72 V, max = +5.24 V) > +12V: +11.67 V (min = +10.79 V, max = +13.19 V) > -12V: -11.88 V (min = -13.19 V, max = -10.73 V) > -5V: -5.06 V (min = -5.24 V, max = -4.74 V) > fan1: 4753 RPM (min = 1500 RPM, div = 4) > fan2: 0 RPM (min = 1500 RPM, div = 4) ALARM > fan3: 0 RPM (min = 1500 RPM, div = 4) ALARM > temp1: +31?C (limit = +60?C, hysteresis = +127?C) > temp2: +40.0?C (limit = +67?C, hysteresis = +60?C) > temp3: +112.2?C (limit = +60?C, hysteresis = +50?C) > vid: +16.50 V > alarms: Chassis intrusion detection ALARM > beep_enable: > Sound alarm enabled > > but if i run these lines afterwards i get another reading: > # head -1l /proc/sys/dev/sensors/as99127f-i2c-0-2d/temp1 > ^[[A60.0 127.0 31.0 > # head -1l /proc/sys/dev/sensors/as99127f-i2c-0-2d/temp2 > ^[[A60.0 50.0 22.0 > # head -1l /proc/sys/dev/sensors/as99127f-i2c-0-2d/temp3 > 60.0 50.0 112.2 > > The strange part is the "temp2" value wich looks completely diffirent. > > also, this it my loaded modules: > lsmod > Module Size Used by Not tainted > w83781d 22768 0 > i2c-proc 9232 1 [w83781d] > i2c-dev 5764 0 > i2c-piix4 5260 0 > dmi_scan 2564 0 [i2c-piix4] > i2c-core 19236 0 [w83781d i2c-proc i2c-dev i2c-piix4] > 3c59x 30704 1 > iptable_filter 2412 0 (autoclean) (unused) > ip_tables 15096 1 [iptable_filter] > microcode 4668 0 (autoclean) > mousedev 5588 0 (unused) > keybdev 2976 0 (unused) > hid 22340 0 (unused) > input 5920 0 [mousedev keybdev hid] > usb-uhci 26412 0 (unused) > usbcore 78944 1 [hid usb-uhci] > ext3 70880 7 > jbd 51988 7 [ext3] > > > Also, i used the detect function to help me find the right sensor. > > Driver `w83781d' (should be inserted): > Detects correctly: > * Bus `SMBus PIIX4 adapter at e800' (Non-I2C SMBus adapter) > Busdriver `i2c-piix4', I2C address 0x2d (and 0x48 0x49) > Chip `Asus AS99127F' (confidence: 8) > > #----cut here---- > # I2C module options > alias char-major-89 i2c-dev > #----cut here---- > > #----cut here---- > # I2C adapter drivers > modprobe i2c-piix4 > # I2C chip drivers > modprobe w83781d > # sleep 2 # optional > /usr/local/bin/sensors -s # recommended > #----cut here---- > > > > Hope this is all the information you need to help me out with this strange > bug. > I use Red Hat 8 with 2.4.20-18.8 > > > Kind regards > > H?kon. > >
