* Nicolas <linux at 1g6.biz> [2003-07-16 16:04:39 +0200]:
>
> kernel 2.4 doesn't work on my computer
> (no networking because sis648/sis900),
^^^^^^^^^^^^^
1. As Jean guessed, you don't have a sis5595. Your port of that module,
even if it loads, is not what you want.
2. The workaround for kernel 2.4 is to load the i2c-sis645 module
*before* you load the sis900 module.
3. In kernel >= 2.5.7x (where x means I can't remember) you want to load
i2c-sis96x instead - sorry for the confusion, but that name is more
accurate.
So I might recommend to you...
Try kernel 2.4 again with I2C and sensors 2.8.0 release so that you can
see what sensors chip you have. I assure you, it's not sis5595. Then
see if that chip is supported by kernel 2.6... maybe so, or maybe you'll
want to port that one.
<snip>
Regards,
--
Mark M. Hoffman
mhoffman at lightlink.com
