ChangeSet 1.1318.3.7, 2003/06/17 15:34:14-07:00, azarah at gentoo.org [PATCH] I2C: fix for previous W83627THF sensor chip patch Ok, I was wrong in assuming that the W83627THF was on the I2C bus. It is on the ISA bus, id 0x90 (thanks to Alex Van Kaam author of MBM who corrected my assumption). drivers/i2c/chips/w83781d.c | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-) diff -Nru a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c --- a/drivers/i2c/chips/w83781d.c Wed Jun 18 11:19:21 2003 +++ b/drivers/i2c/chips/w83781d.c Wed Jun 18 11:19:21 2003 @@ -28,6 +28,7 @@ asb100 "bach" (type_name = as99127f) 0x30 0x0694 yes no w83781d 7 3 0 3 0x10 0x5ca3 yes yes w83627hf 9 3 2 3 0x20 0x5ca3 yes yes(LPC) + w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC) w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) @@ -1285,7 +1286,7 @@ kind = w83782d; else if (val1 == 0x40 && vendid == winbond && !is_isa) kind = w83783s; - else if ((val1 == 0x20 || val1 == 0x72) && vendid == winbond) + else if ((val1 == 0x20 || val1 == 0x90) && vendid == winbond) kind = w83627hf; else if (val1 == 0x30 && vendid == asus && !is_isa) kind = as99127f; @@ -1309,7 +1310,10 @@ } else if (kind == w83783s) { client_name = "W83783S chip"; } else if (kind == w83627hf) { - client_name = "W83627HF chip"; + if (val1 == 0x90) + client_name = "W83627THF chip"; + else + client_name = "W83627HF chip"; } else if (kind == as99127f) { client_name = "AS99127F chip"; } else if (kind == w83697hf) {