ChangeSet 1.1318.3.4, 2003/06/16 11:32:06-07:00, azarah at gentoo.org
[PATCH] I2C: ICH5 SMBus and W83627THF additions
I have been trying to get the W83627THF chip working on this
board. It is an Asus P4C800 with Intel 875p chipset and a
W83627THF connected via the SMBus.
There are no data sheet for the W83627THF as far as I can see,
but supposidly it is a W83627HF with advance Fan control, etc.
I have applied attached patches, and tried various other things
to get it to work, but no avail. The SMBus on the ICH5 seems to
work, and it seems to detect the sensor chip just fine, but it
do not seem to read any values from the W83627THF.
drivers/i2c/busses/i2c-i801.c | 10 +++++++++-
drivers/i2c/chips/w83781d.c | 2 +-
2 files changed, 10 insertions(+), 2 deletions(-)
diff -Nru a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
--- a/drivers/i2c/busses/i2c-i801.c Wed Jun 18 11:19:35 2003
+++ b/drivers/i2c/busses/i2c-i801.c Wed Jun 18 11:19:35 2003
@@ -27,6 +27,7 @@
82801BA 2443
82801CA/CAM 2483
82801DB 24C3 (HW PEC supported, 32 byte buffer not supported)
+ 82801EB 24D3 (HW PEC supported, 32 byte buffer not supported)
This driver supports several versions of Intel's I/O Controller Hubs (ICH).
For SMBus support, they are similar to the PIIX4 and are part
@@ -121,7 +122,8 @@
return -ENODEV;
I801_dev = dev;
- if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_3)
+ if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
+ (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3))
isich4 = 1;
else
isich4 = 0;
@@ -584,6 +586,12 @@
.device = PCI_DEVICE_ID_INTEL_82801DB_3,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801EB_3,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
},
{ 0, }
};
diff -Nru a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c
--- a/drivers/i2c/chips/w83781d.c Wed Jun 18 11:19:35 2003
+++ b/drivers/i2c/chips/w83781d.c Wed Jun 18 11:19:35 2003
@@ -1285,7 +1285,7 @@
kind = w83782d;
else if (val1 == 0x40 && vendid == winbond && !is_isa)
kind = w83783s;
- else if (val1 == 0x20 && vendid == winbond)
+ else if ((val1 == 0x20 || val1 == 0x72) && vendid == winbond)
kind = w83627hf;
else if (val1 == 0x30 && vendid == asus && !is_isa)
kind = as99127f;
