Hi, As you requested, I changed "0xca" to "0xc9" at line 668 in bmcsensors.c (while leaving in #define DEBUG 1). The relevant output of dmesg is now: ############################################################### i2c-core.o: i2c core module version 2.7.0 (20021208) i2c-i801.o version 2.7.0 (20021208) i2c-i801.o: I801 bus detected and initialized i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208) i2c-dev.o: Registered 'SMBus I801 adapter at 1100' as minor 0 i2c-proc.o version 2.7.0 (20021208) ipmi: message handler initialized ipmi_kcs: Acquiring BMC @ port=0xca2 i2c-isa.o version 2.7.0 (20021208) i2c-dev.o: Registered 'ISA main adapter' as minor 1 i2c-isa.o: ISA bus access for i2c modules initialized. i2c-proc.o version 2.7.0 (20021208) eeprom.o version 2.7.0 (20021208) i2c-ipmi.o version 2.7.0 (20021208) i2c-dev.o: Registered 'IPMI adapter' as minor 2 i2c-ipmi.o: Registered IPMI interface 0 with version 1.0 i2c-ipmi.o: BMC access for i2c modules initialized. bmcsensors.o version 2.7.0 (20021208) bmcsensors.o: Registered client, scanning for sensors... bmcsensors.o: Send BMC msg, cmd: 0x22 bmcsensors.o: Got first resid 0x0001 bmcsensors.o: Get SDR 0x0 0x0 0x0 bmcsensors.o: Send BMC msg, cmd: 0x23 bmcsensors.o: Reducing SDR request size to 33 bmcsensors.o: Get SDR 0x0 0x0 0x0 bmcsensors.o: Send BMC msg, cmd: 0x23 bmcsensors.o: Reducing SDR request size to 16 bmcsensors.o: Get SDR 0x0 0x0 0x0 bmcsensors.o: Send BMC msg, cmd: 0x23 bmcsensors.o: Reducing SDR request size to 8 bmcsensors.o: Get SDR 0x0 0x0 0x0 bmcsensors.o: Send BMC msg, cmd: 0x23 bmcsensors.o: IPMI buffers too small, giving up ############################################################### Four your reference, here is the original dmesg output: ############################################################### ipmi: message handler initialized ipmi_kcs: Acquiring BMC @ port=0xca2 i2c-isa.o version 2.6.5 (20020915) i2c-dev.o: Registered ?ISA main adapter? as minor 1 i2c-isa.o: ISA bus access for i2c modules initialized. i2c-proc.o version 2.7.0 (20021208) eeprom.o version 2.6.5 (20020915) i2c-ipmi.o version 2.7.0 (20021208) i2c-dev.o: Registered ?IPMI adapter? as minor 2 i2c-ipmi.o: Registered IPMI interface 0 with version 1.0 i2c-ipmi.o: BMC access for i2c modules initialized. bmcsensors.o version 2.7.0 (20021208) bmcsensors.o: Registered client, scanning for sensors... bmcsensors.o: Send BMC msg, cmd: 0x22 bmcsensors.o: Got first resid 0x0001 bmcsensors.o: Get SDR 0x0 0x0 0x0 bmcsensors.o: Send BMC msg, cmd: 0x23 bmcsensors.o: Error 0xc9 on cmd 0xa/0x23; state = 2; probably fatal. ############################################################### Regards, Richard -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20030616/7de45177/attachment.html
