On Mon, 2003-06-16 at 18:31, Greg KH wrote: > On Mon, Jun 16, 2003 at 04:55:51PM +0200, Martin Schlemmer wrote: > > Hi > > > > I have been trying to get the W83627THF chip working on this > > board. It is an Asus P4C800 with Intel 875p chipset and a > > W83627THF connected via the SMBus. > > > > There are no data sheet for the W83627THF as far as I can see, > > but supposidly it is a W83627HF with advance Fan control, etc. > > > > I have applied attached patches, and tried various other things > > to get it to work, but no avail. The SMBus on the ICH5 seems to > > work, and it seems to detect the sensor chip just fine, but it > > do not seem to read any values from the W83627THF. > > > > PCI ID: > > > > -------------------------- > > Bus 0, device 31, function 3: > > SMBus: PCI device 8086:24d3 (Intel Corp.) (rev 2). > > IRQ 17. > > I/O at 0x400 [0x41f]. > > -------------------------- > > > > Kernel logs when loading drivers: > > > > -------------------------- > > i2c-i801 version 2.7.0 (20021208) > > w83781d: Found sensor chip W83627HF chip, id 0x72 > > registering 1-002f > > registering 1-0049 > > registering 1-0048 > > -------------------------- > > > > > > Sysfs files created: > > > > -------------------------- > > nosferatu linux # ls /sys/bus/i2c/devices/1-002f > > alarms fan_div3 fan_min2 in_input3 in_input8 in_max4 > > in_min0 in_min5 power sensor2 temp_max1 temp_min3 > > beep_enable fan_input1 fan_min3 in_input4 in_max0 in_max5 > > in_min1 in_min6 pwm1 sensor3 temp_max2 vid > > beep_mask fan_input2 in_input0 in_input5 in_max1 in_max6 > > in_min2 in_min7 pwm2 temp_input1 temp_max3 vrm > > fan_div1 fan_input3 in_input1 in_input6 in_max2 in_max7 > > in_min3 in_min8 pwm_enable2 temp_input2 temp_min1 > > fan_div2 fan_min1 in_input2 in_input7 in_max3 in_max8 > > in_min4 name sensor1 temp_input3 temp_min2 > > Looks good, what does any of these files say if you cat them? > > Why do you think that you are not reading any values? > Yep, but like I said .. it does not seem to read the correct values from the chip. I might be missing something simple though (common in cases where you have been at it for a while =). --------------------------------------------------- nosferatu root # cat /sys/bus/i2c/devices/0-002f/fan_input[123] 0 0 0 nosferatu root # cat /sys/bus/i2c/devices/0-002f/temp_input[123] 12700 12700 12700 nosferatu root # cat /sys/bus/i2c/devices/0-002f/in_input[0-8] 0 0 112 3120 0 0 0 4080 4080 nosferatu root # ----------------------------------------------------- > And does the attached patch help any? Or does it not do anything? > I am guessing you forgot the patch ? :) Regards, -- Martin Schlemmer -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20030616/80455c44/attachment.bin
