Hi! I have lm-sensors installed and configured, but I suppose it does not work properly. I have a water-cooled PC. When I turn off the cooling system BIOS shows CPU temp. growing starting from 25C with speed 3-4C per minute. When I do the same running linux and checking temperature using sensors - Temp2/CPU does not change, Temp3 grows, but starting from 33C, which(I suppose) is wrong. My motherboard is Gigabyte GA-60XT Rev. 1.1, chipset Intel I815EP. I'm not sure if I'm using correct chip module (it87) (I couldn't find I815 in doc/chips/*), but that is the only one detected by sensors-detect. temp_type I'm using is 0x1c (any other value gives strange values). All other info you'll find in attachments. Best regards, Richard. -- -------------- next part -------------- A non-text attachment was scrubbed... Name: sensors.tar.gz Type: application/octet-stream Size: 16215 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20030526/5b463f12/attachment.obj
