Hi,
Appreciate any help on getting an adm1026 on a dual opteron
working. I am listing my observtions below. 'Will be grateful for
any solution to this..:
Problem summary:
----------------
Motherboard : Arima (BIOS 1.50) dual opteron
When using lm_sensors with the patch from penguincomputing (Philip
Pokorney), the adm1026 can be detected by sensors-detect, but even after
a correct build and install of the suggested modules, we get the
following error upon running sensors:
"No sensors found"
Possible cause:
---------------
We did not see the adm1026 either under /proc/sys/dev or /proc/bus/i2c
The modules loaded at the time of running sensors were:
i2c-core, i2c-dev, i2c-proc, i2c-amd756, adm1026.
Are there patches (e.g to adm1026 or i2c-proc) that we are missing?
Detailed description:
----------------------
1) downloaded i2c-2.7.0 and lm_sensors 2.7.0 from
http://www2.lm-sensors.nu/~lm78/download.html
2) patch adm1026 on to lm_Sensors-2.7.0 from
ftp.penguincomputing.com/pub/updates/lmsensors/lm_sensors-2.7.0-adm1026-9.patch
3) Build (64 bit) against 2.4.19 (Suse's distribution : United Linux 1.0))
builds with nominal problems
4) Install (both i2c and lm_sensors)
5) sensors-detect finds adm1026 off the SMBus AMD8111 adapter
and lists i2c-amd756, adm1026.
6) insmod modules i2c-core, i2c-dev, i2c-porc, i2c-isa , i2c-amd756 and
adm1026:
i2c-core.o: i2c core module version 2.7.0 (20021208)
i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208)
i2c-proc.o version 2.7.0 (20021208)
i2c-amd756.o version 2.7.0 (20021208)
i2c-amd756.o: Found AMD8111 SMBus controller.
adm1026: Version 2.7.0 (20021208)
adm1026: See http://www.penguincomputing.com/lm_sensors for more info.
7) "sensors" gives:
No sensors found!
-thanks and regards,
Atish
Atish Datta Chowdhury
Software Engineer
Angstrom Microsystems
