Thanks, Unfortunately, we've duplicated our efforts here. I've already written an ADM1026 driver and was about to release it. Did you check the new-drivers page before you started? Also, your patch does not include the actual chip driver (kernel/chips/adm1026.c). Did you write any documentation or other files that were not included with your patch? I've attached my patch to 2.7.0. It's also available at: ftp://ftp.penguincomputing.com/pub/updates/lmsensors/lm_sensors-2.7.0-adm1026-6.patch Please send me your other driver files and I'll see if you've got something better than my code. Thanks, :v) Eric BENARD / Free wrote: > Hi, > > both these patches add adm1026 support to lm_sensors & i2c release 2.7.0. > > TODO : > - Alarms are not yet handled but this is planned for next release ;-) > - sensord not yet changed. > - computation in /etc/sensors.conf not all validated. > > sample output : > adm1026-i2c-0-2c > Adapter: SMBus Via Pro adapter at 0500 > Algorithm: Non-I2C SMBus adapter > +3.3V SB: +3.34 V (min = +0.00 V, max = +4.39 V) > +3.3V MN: +3.37 V (min = +0.00 V, max = +4.39 V) > +5V: +5.10 V (min = +0.00 V, max = +6.63 V) > Vccp: +1.46 V (min = +0.00 V, max = +3.06 V) > +12V: +11.69 V (min = +0.00 V, max = +15.94 V) > -12V: -11.04 V (min = -15.93 V, max = +2.69 V) > ain0: +0.00 V (min = +0.00 V, max = +2.55 V) > ain1: +0.00 V (min = +0.00 V, max = +2.55 V) > ain2: +0.00 V (min = +0.00 V, max = +2.55 V) > ain3: +0.00 V (min = +0.00 V, max = +2.55 V) > ain4: +0.00 V (min = +0.00 V, max = +2.55 V) > ain5: +0.00 V (min = +0.00 V, max = +2.55 V) > ain6: +2.54 V (min = +0.00 V, max = +2.55 V) > ain7: +0.02 V (min = +0.00 V, max = +2.55 V) > auxin0: +1.86 V (min = +1.94 V, max = +2.20 V) > auxin1: +0.00 V (min = +1.96 V, max = +1.28 V) > temp: +31.0?C (min = +0?C, max = +0?C) 0 > rtemp1: +22.0?C (min = +10?C, max = +13?C) 0 > rtemp2: +12.8?C (min = +10?C, max = +13?C) -1717986918 > fan0: 13200 RPM (min = 16500 RPM) > fan1: 9078 RPM (min = 14318 RPM) > fan2: 8551 RPM (min = 14318 RPM) > fan3: 9078 RPM (min = 14318 RPM) > fan4: 8551 RPM (min = 14318 RPM) > fan5: 8066 RPM (min = 14318 RPM) > fan6: 8385 RPM (min = 14318 RPM) > fan7: 0 RPM (min = 0 RPM) > > Regards > Eric -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: lm_sensors-2.7.0-adm1026-6.patch Url: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20030429/48ca10ea/attachment.pl
