Hiya guys,
Just dropping you a couple of lines to let you know
lm_sensors work fine with my motherboard.
Detail as follows:
Motherboard: MSI (Micro-Star International)
MS-6580 (v2.1) 845PE Max ATX
G52-M6580X4
Chipset: Intel 845PE
LM_Sensors: v2.6.5
Detected busses:i2c-i801 / i2c-isa
Detected chips: w83781d / lm80 (emulated??)
SMBus gives buggy output (lame lm80 emulation??):
lm80-i2c-0-2f
Adapter: SMBus I801 adapter at 0c00
Algorithm: Non-I2C SMBus adapter
+5V: +6.71 V (min = +6.71 V, max = +6.71 V) ALARM
VTT: +2.55 V (min = +2.55 V, max = +2.55 V) ALARM
+3.3V: +4.43 V (min = +4.43 V, max = +4.43 V) ALARM
+Vcore: +3.76 V (min = +3.76 V, max = +3.76 V) ALARM
+12V: +16.10 V (min = +16.10 V, max = +16.10 V) ALARM
-12V: -16.11 V (min = -16.11 V, max = -16.11 V) ALARM
-5V: -6.70 V (min = -6.70 V, max = -6.70 V) ALARM
fan1: 0 RPM (min = 0 RPM, div = 8) ALARM
fan2: 0 RPM (min = 0 RPM, div = 8) ALARM
temp: -1.00 ?C (hot:limit = -1?C, hysteresis = -1?C) ALARM
(os: limit = -1?C, hysteresis = -1?C) ALARM
alarms: Board temperature input (LM75) ALARM
ISA adapter data is just fine:
w83627hf-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1: +1.76 V (min = +1.80 V, max = +1.98 V)
VCore 2: +1.80 V (min = +1.80 V, max = +1.98 V) ALARM
+3.3V: +3.18 V (min = +3.13 V, max = +3.45 V)
+5V: +4.99 V (min = +4.72 V, max = +5.24 V)
+12V: +11.86 V (min = +10.79 V, max = +13.19 V)
-12V: -11.62 V (min = -13.21 V, max = -10.90 V)
-5V: -5.01 V (min = -5.26 V, max = -4.76 V)
V5SB: +5.43 V (min = +4.72 V, max = +5.24 V)
VBat: +3.15 V (min = +2.40 V, max = +3.60 V)
fan1: 2812 RPM (min = 3000 RPM, div = 2)
fan2: 0 RPM (min = 3000 RPM, div = 2)
fan3: 0 RPM (min = 3000 RPM, div = 2)
temp1: +27?C (limit = +60?C) sensor =
thermistor temp2: +38.0?C (limit = +60?C, hysteresis =
+50?C) sensor = PII/Celeron diode temp3: +58.0?C (limit =
+60?C, hysteresis = +50?C) sensor = thermistor vid:
+1.900 V alarms: Chassis intrusion detection
ALARM beep_enable:
Sound alarm disabled
Well, hope this is of use
keep up the good work and stay cool
Peter
