ChangeSet 1.1033.3.2, 2003/04/07 09:36:02-07:00, j.dittmer at portrix.net
[PATCH] i2c: convert via686a i2c driver to sysfs
drivers/i2c/chips/via686a.c | 545 ++++++++++++++++++++++++--------------------
1 files changed, 299 insertions(+), 246 deletions(-)
diff -Nru a/drivers/i2c/chips/via686a.c b/drivers/i2c/chips/via686a.c
--- a/drivers/i2c/chips/via686a.c Wed Apr 9 15:16:56 2003
+++ b/drivers/i2c/chips/via686a.c Wed Apr 9 15:16:56 2003
@@ -87,9 +87,9 @@
static const u8 reghyst[] = { 0x3a, 0x3e, 0x1e };
/* temps numbered 1-3 */
-#define VIA686A_REG_TEMP(nr) (regtemp[(nr) - 1])
-#define VIA686A_REG_TEMP_OVER(nr) (regover[(nr) - 1])
-#define VIA686A_REG_TEMP_HYST(nr) (reghyst[(nr) - 1])
+#define VIA686A_REG_TEMP(nr) (regtemp[nr])
+#define VIA686A_REG_TEMP_OVER(nr) (regover[nr])
+#define VIA686A_REG_TEMP_HYST(nr) (reghyst[nr])
#define VIA686A_REG_TEMP_LOW1 0x4b // bits 7-6
#define VIA686A_REG_TEMP_LOW23 0x49 // 2 = bits 5-4, 3 = bits 7-6
@@ -369,6 +369,8 @@
dynamically allocated, at the same time when a new via686a client is
allocated. */
struct via686a_data {
+ int sysctl_id;
+
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -388,16 +390,262 @@
static struct pci_dev *s_bridge; /* pointer to the (only) via686a */
static int via686a_attach_adapter(struct i2c_adapter *adapter);
-static int via686a_detect(struct i2c_adapter *adapter, int address, int kind);
+static int via686a_detect(struct i2c_adapter *adapter, int address,
+ unsigned short flags, int kind);
static int via686a_detach_client(struct i2c_client *client);
-static int via686a_read_value(struct i2c_client *client, u8 register);
-static void via686a_write_value(struct i2c_client *client, u8 register,
- u8 value);
+static inline int via686a_read_value(struct i2c_client *client, u8 reg)
+{
+ return (inb_p(client->addr + reg));
+}
+
+static inline void via686a_write_value(struct i2c_client *client, u8 reg,
+ u8 value)
+{
+ outb_p(value, client->addr + reg);
+}
+
static void via686a_update_client(struct i2c_client *client);
static void via686a_init_client(struct i2c_client *client);
-static int via686a_id = 0;
+/* following are the sysfs callback functions */
+
+/* 7 voltage sensors */
+static ssize_t show_in(struct device *dev, char *buf, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf, "%ld\n", IN_FROM_REG(data->in[nr], nr)*10 );
+}
+
+static ssize_t show_in_min(struct device *dev, char *buf, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_min[nr], nr)*10 );
+}
+
+static ssize_t show_in_max(struct device *dev, char *buf, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_max[nr], nr)*10 );
+}
+
+static ssize_t set_in_min(struct device *dev, const char *buf,
+ size_t count, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10)/10;
+ data->in_min[nr] = IN_TO_REG(val,nr);
+ via686a_write_value(client, VIA686A_REG_IN_MIN(nr),
+ data->in_min[nr]);
+ return count;
+}
+static ssize_t set_in_max(struct device *dev, const char *buf,
+ size_t count, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10)/10;
+ data->in_max[nr] = IN_TO_REG(val,nr);
+ via686a_write_value(client, VIA686A_REG_IN_MAX(nr),
+ data->in_max[nr]);
+ return count;
+}
+#define show_in_offset(offset) \
+static ssize_t \
+ show_in##offset (struct device *dev, char *buf) \
+{ \
+ return show_in(dev, buf, 0x##offset); \
+} \
+static ssize_t \
+ show_in##offset##_min (struct device *dev, char *buf) \
+{ \
+ return show_in_min(dev, buf, 0x##offset); \
+} \
+static ssize_t \
+ show_in##offset##_max (struct device *dev, char *buf) \
+{ \
+ return show_in_max(dev, buf, 0x##offset); \
+} \
+static ssize_t set_in##offset##_min (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_in_min(dev, buf, count, 0x##offset); \
+} \
+static ssize_t set_in##offset##_max (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_in_max(dev, buf, count, 0x##offset); \
+} \
+static DEVICE_ATTR(in_input##offset, S_IRUGO, show_in##offset, NULL) \
+static DEVICE_ATTR(in_min##offset, S_IRUGO | S_IWUSR, \
+ show_in##offset##_min, set_in##offset##_min) \
+static DEVICE_ATTR(in_max##offset, S_IRUGO | S_IWUSR, \
+ show_in##offset##_max, set_in##offset##_max)
+
+show_in_offset(0);
+show_in_offset(1);
+show_in_offset(2);
+show_in_offset(3);
+show_in_offset(4);
+
+/* 3 temperatures */
+static ssize_t show_temp(struct device *dev, char *buf, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])*10 );
+}
+/* more like overshoot temperature */
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])*10);
+}
+/* more like hysteresis temperature */
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])*10);
+}
+static ssize_t set_temp_max(struct device *dev, const char *buf,
+ size_t count, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10)/10;
+ data->temp_over[nr] = TEMP_TO_REG(val);
+ via686a_write_value(client, VIA686A_REG_TEMP_OVER(nr), data->temp_over[nr]);
+ return count;
+}
+static ssize_t set_temp_min(struct device *dev, const char *buf,
+ size_t count, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10)/10;
+ data->temp_hyst[nr] = TEMP_TO_REG(val);
+ via686a_write_value(client, VIA686A_REG_TEMP_HYST(nr), data->temp_hyst[nr]);
+ return count;
+}
+#define show_temp_offset(offset) \
+static ssize_t show_temp_##offset (struct device *dev, char *buf) \
+{ \
+ return show_temp(dev, buf, 0x##offset - 1); \
+} \
+static ssize_t \
+show_temp_##offset##_max (struct device *dev, char *buf) \
+{ \
+ return show_temp_max(dev, buf, 0x##offset - 1); \
+} \
+static ssize_t \
+show_temp_##offset##_min (struct device *dev, char *buf) \
+{ \
+ return show_temp_min(dev, buf, 0x##offset - 1); \
+} \
+static ssize_t set_temp_##offset##_max (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_temp_max(dev, buf, count, 0x##offset - 1); \
+} \
+static ssize_t set_temp_##offset##_min (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_temp_min(dev, buf, count, 0x##offset - 1); \
+} \
+static DEVICE_ATTR(temp_input##offset, S_IRUGO, show_temp_##offset, NULL) \
+static DEVICE_ATTR(temp_max##offset, S_IRUGO | S_IWUSR, \
+ show_temp_##offset##_max, set_temp_##offset##_max) \
+static DEVICE_ATTR(temp_min##offset, S_IRUGO | S_IWUSR, \
+ show_temp_##offset##_min, set_temp_##offset##_min)
+
+show_temp_offset(1);
+show_temp_offset(2);
+show_temp_offset(3);
+
+/* 2 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr],
+ DIV_FROM_REG(data->fan_div[nr])) );
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf,"%d\n",
+ FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) );
+}
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf,"%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+}
+static ssize_t set_fan_min(struct device *dev, const char *buf,
+ size_t count, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+ return count;
+}
+static ssize_t set_fan_div(struct device *dev, const char *buf,
+ size_t count, int nr) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+ int old = via686a_read_value(client, VIA686A_REG_FANDIV);
+ data->fan_div[nr] = DIV_TO_REG(val);
+ old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
+ via686a_write_value(client, VIA686A_REG_FANDIV, old);
+ return count;
+}
+
+#define show_fan_offset(offset) \
+static ssize_t show_fan_##offset (struct device *dev, char *buf) \
+{ \
+ return show_fan(dev, buf, 0x##offset - 1); \
+} \
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \
+{ \
+ return show_fan_min(dev, buf, 0x##offset - 1); \
+} \
+static ssize_t show_fan_##offset##_div (struct device *dev, char *buf) \
+{ \
+ return show_fan_div(dev, buf, 0x##offset - 1); \
+} \
+static ssize_t set_fan_##offset##_min (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_fan_min(dev, buf, count, 0x##offset - 1); \
+} \
+static ssize_t set_fan_##offset##_div (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_fan_div(dev, buf, count, 0x##offset - 1); \
+} \
+static DEVICE_ATTR(fan_input##offset, S_IRUGO, show_fan_##offset, NULL) \
+static DEVICE_ATTR(fan_min##offset, S_IRUGO | S_IWUSR, \
+ show_fan_##offset##_min, set_fan_##offset##_min) \
+static DEVICE_ATTR(fan_div##offset, S_IRUGO | S_IWUSR, \
+ show_fan_##offset##_div, set_fan_##offset##_div)
+
+show_fan_offset(1);
+show_fan_offset(2);
+
+/* Alarm */
+static ssize_t show_alarm(struct device *dev, char *buf) {
+ struct i2c_client *client = to_i2c_client(dev);
+ struct via686a_data *data = i2c_get_clientdata(client);
+ via686a_update_client(client);
+ return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
+}
+static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, show_alarm, NULL);
/* The driver. I choose to use type i2c_driver, as at is identical to both
smbus_driver and isa_driver, and clients could be of either kind */
@@ -411,95 +659,19 @@
};
-
-/* The /proc/sys entries */
-
-/* -- SENSORS SYSCTL START -- */
-#define VIA686A_SYSCTL_IN0 1000
-#define VIA686A_SYSCTL_IN1 1001
-#define VIA686A_SYSCTL_IN2 1002
-#define VIA686A_SYSCTL_IN3 1003
-#define VIA686A_SYSCTL_IN4 1004
-#define VIA686A_SYSCTL_FAN1 1101
-#define VIA686A_SYSCTL_FAN2 1102
-#define VIA686A_SYSCTL_TEMP 1200
-#define VIA686A_SYSCTL_TEMP2 1201
-#define VIA686A_SYSCTL_TEMP3 1202
-#define VIA686A_SYSCTL_FAN_DIV 2000
-#define VIA686A_SYSCTL_ALARMS 2001
-
-#define VIA686A_ALARM_IN0 0x01
-#define VIA686A_ALARM_IN1 0x02
-#define VIA686A_ALARM_IN2 0x04
-#define VIA686A_ALARM_IN3 0x08
-#define VIA686A_ALARM_TEMP 0x10
-#define VIA686A_ALARM_FAN1 0x40
-#define VIA686A_ALARM_FAN2 0x80
-#define VIA686A_ALARM_IN4 0x100
-#define VIA686A_ALARM_TEMP2 0x800
-#define VIA686A_ALARM_CHAS 0x1000
-#define VIA686A_ALARM_TEMP3 0x8000
-
-/* -- SENSORS SYSCTL END -- */
-
-#if 0
-/* These files are created for each detected VIA686A. This is just a template;
- though at first sight, you might think we could use a statically
- allocated list, we need some way to get back to the parent - which
- is done through one of the 'extra' fields which are initialized
- when a new copy is allocated. */
-static ctl_table via686a_dir_table_template[] = {
- {VIA686A_SYSCTL_IN0, "in0", NULL, 0, 0644, NULL, &i2c_proc_real,
- &i2c_sysctl_real, NULL, &via686a_in},
- {VIA686A_SYSCTL_IN1, "in1", NULL, 0, 0644, NULL, &i2c_proc_real,
- &i2c_sysctl_real, NULL, &via686a_in},
- {VIA686A_SYSCTL_IN2, "in2", NULL, 0, 0644, NULL, &i2c_proc_real,
- &i2c_sysctl_real, NULL, &via686a_in},
- {VIA686A_SYSCTL_IN3, "in3", NULL, 0, 0644, NULL, &i2c_proc_real,
- &i2c_sysctl_real, NULL, &via686a_in},
- {VIA686A_SYSCTL_IN4, "in4", NULL, 0, 0644, NULL, &i2c_proc_real,
- &i2c_sysctl_real, NULL, &via686a_in},
- {VIA686A_SYSCTL_FAN1, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
- &i2c_sysctl_real, NULL, &via686a_fan},
- {VIA686A_SYSCTL_FAN2, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
- &i2c_sysctl_real, NULL, &via686a_fan},
- {VIA686A_SYSCTL_TEMP, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
- &i2c_sysctl_real, NULL, &via686a_temp},
- {VIA686A_SYSCTL_TEMP2, "temp2", NULL, 0, 0644, NULL,
- &i2c_proc_real, &i2c_sysctl_real, NULL, &via686a_temp},
- {VIA686A_SYSCTL_TEMP3, "temp3", NULL, 0, 0644, NULL,
- &i2c_proc_real, &i2c_sysctl_real, NULL, &via686a_temp},
- {VIA686A_SYSCTL_FAN_DIV, "fan_div", NULL, 0, 0644, NULL,
- &i2c_proc_real, &i2c_sysctl_real, NULL, &via686a_fan_div},
- {VIA686A_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL,
- &i2c_proc_real, &i2c_sysctl_real, NULL, &via686a_alarms},
- {0}
-};
-#endif
-
-static inline int via686a_read_value(struct i2c_client *client, u8 reg)
-{
- return (inb_p(client->addr + reg));
-}
-
-static inline void via686a_write_value(struct i2c_client *client, u8 reg,
- u8 value)
-{
- outb_p(value, client->addr + reg);
-}
-
/* This is called when the module is loaded */
static int via686a_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_detect(adapter, &addr_data, via686a_detect);
}
-static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
+static int via686a_detect(struct i2c_adapter *adapter, int address,
+ unsigned short flags, int kind)
{
struct i2c_client *new_client;
struct via686a_data *data;
int err = 0;
- const char *name = "via686a";
+ const char client_name[] = "via686a chip";
u16 val;
/* Make sure we are probing the ISA bus!! */
@@ -552,16 +724,49 @@
new_client->adapter = adapter;
new_client->driver = &via686a_driver;
new_client->flags = 0;
+ new_client->dev.parent = &adapter->dev;
/* Fill in the remaining client fields and put into the global list */
- snprintf(new_client->dev.name, DEVICE_NAME_SIZE, name);
+ snprintf(new_client->dev.name, DEVICE_NAME_SIZE, client_name);
- new_client->id = via686a_id++;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR3;
+
+ /* register sysfs hooks */
+ device_create_file(&new_client->dev, &dev_attr_in_input0);
+ device_create_file(&new_client->dev, &dev_attr_in_input1);
+ device_create_file(&new_client->dev, &dev_attr_in_input2);
+ device_create_file(&new_client->dev, &dev_attr_in_input3);
+ device_create_file(&new_client->dev, &dev_attr_in_input4);
+ device_create_file(&new_client->dev, &dev_attr_in_min0);
+ device_create_file(&new_client->dev, &dev_attr_in_min1);
+ device_create_file(&new_client->dev, &dev_attr_in_min2);
+ device_create_file(&new_client->dev, &dev_attr_in_min3);
+ device_create_file(&new_client->dev, &dev_attr_in_min4);
+ device_create_file(&new_client->dev, &dev_attr_in_max0);
+ device_create_file(&new_client->dev, &dev_attr_in_max1);
+ device_create_file(&new_client->dev, &dev_attr_in_max2);
+ device_create_file(&new_client->dev, &dev_attr_in_max3);
+ device_create_file(&new_client->dev, &dev_attr_in_max4);
+ device_create_file(&new_client->dev, &dev_attr_temp_input1);
+ device_create_file(&new_client->dev, &dev_attr_temp_input2);
+ device_create_file(&new_client->dev, &dev_attr_temp_input3);
+ device_create_file(&new_client->dev, &dev_attr_temp_max1);
+ device_create_file(&new_client->dev, &dev_attr_temp_max2);
+ device_create_file(&new_client->dev, &dev_attr_temp_max3);
+ device_create_file(&new_client->dev, &dev_attr_temp_min1);
+ device_create_file(&new_client->dev, &dev_attr_temp_min2);
+ device_create_file(&new_client->dev, &dev_attr_temp_min3);
+ device_create_file(&new_client->dev, &dev_attr_fan_input1);
+ device_create_file(&new_client->dev, &dev_attr_fan_input2);
+ device_create_file(&new_client->dev, &dev_attr_fan_min1);
+ device_create_file(&new_client->dev, &dev_attr_fan_min2);
+ device_create_file(&new_client->dev, &dev_attr_fan_div1);
+ device_create_file(&new_client->dev, &dev_attr_fan_div2);
+ device_create_file(&new_client->dev, &dev_attr_alarm);
/* Initialize the VIA686A chip */
via686a_init_client(new_client);
@@ -629,7 +834,7 @@
FAN_TO_REG(VIA686A_INIT_FAN_MIN, 2));
via686a_write_value(client, VIA686A_REG_FAN_MIN(2),
FAN_TO_REG(VIA686A_INIT_FAN_MIN, 2));
- for (i = 1; i <= 3; i++) {
+ for (i = 0; i <= 2; i++) {
via686a_write_value(client, VIA686A_REG_TEMP_OVER(i),
TEMP_TO_REG(VIA686A_INIT_TEMP_OVER));
via686a_write_value(client, VIA686A_REG_TEMP_HYST(i),
@@ -670,13 +875,13 @@
data->fan_min[i - 1] = via686a_read_value(client,
VIA686A_REG_FAN_MIN(i));
}
- for (i = 1; i <= 3; i++) {
- data->temp[i - 1] = via686a_read_value(client,
+ for (i = 0; i <= 2; i++) {
+ data->temp[i] = via686a_read_value(client,
VIA686A_REG_TEMP(i)) << 2;
- data->temp_over[i - 1] =
+ data->temp_over[i] =
via686a_read_value(client,
VIA686A_REG_TEMP_OVER(i));
- data->temp_hyst[i - 1] =
+ data->temp_hyst[i] =
via686a_read_value(client,
VIA686A_REG_TEMP_HYST(i));
}
@@ -709,164 +914,12 @@
up(&data->update_lock);
}
-
-/* The next few functions are the call-back functions of the /proc/sys and
- sysctl files. Which function is used is defined in the ctl_table in
- the extra1 field.
- Each function must return the magnitude (power of 10 to divide the date
- with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
- put a maximum of *nrels elements in results reflecting the data of this
- file, and set *nrels to the number it actually put in it, if operation==
- SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
- results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
- Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
- large enough (by checking the incoming value of *nrels). This is not very
- good practice, but as long as you put less than about 5 values in results,
- you can assume it is large enough. */
-/* FIXME, remove these functions, they are here to verify the sysfs conversion
- * is correct, or not */
-__attribute__((unused))
-static void via686a_in(struct i2c_client *client, int operation, int ctl_name,
- int *nrels_mag, long *results)
-{
- struct via686a_data *data = i2c_get_clientdata(client);
- int nr = ctl_name - VIA686A_SYSCTL_IN0;
-
- if (operation == SENSORS_PROC_REAL_INFO)
- *nrels_mag = 2;
- else if (operation == SENSORS_PROC_REAL_READ) {
- via686a_update_client(client);
- results[0] = IN_FROM_REG(data->in_min[nr], nr);
- results[1] = IN_FROM_REG(data->in_max[nr], nr);
- results[2] = IN_FROM_REG(data->in[nr], nr);
- *nrels_mag = 3;
- } else if (operation == SENSORS_PROC_REAL_WRITE) {
- if (*nrels_mag >= 1) {
- data->in_min[nr] = IN_TO_REG(results[0], nr);
- via686a_write_value(client, VIA686A_REG_IN_MIN(nr),
- data->in_min[nr]);
- }
- if (*nrels_mag >= 2) {
- data->in_max[nr] = IN_TO_REG(results[1], nr);
- via686a_write_value(client, VIA686A_REG_IN_MAX(nr),
- data->in_max[nr]);
- }
- }
-}
-
-__attribute__((unused))
-static void via686a_fan(struct i2c_client *client, int operation, int ctl_name,
- int *nrels_mag, long *results)
-{
- struct via686a_data *data = i2c_get_clientdata(client);
- int nr = ctl_name - VIA686A_SYSCTL_FAN1 + 1;
-
- if (operation == SENSORS_PROC_REAL_INFO)
- *nrels_mag = 0;
- else if (operation == SENSORS_PROC_REAL_READ) {
- via686a_update_client(client);
- results[0] = FAN_FROM_REG(data->fan_min[nr - 1],
- DIV_FROM_REG(data->fan_div
- [nr - 1]));
- results[1] = FAN_FROM_REG(data->fan[nr - 1],
- DIV_FROM_REG(data->fan_div[nr - 1]));
- *nrels_mag = 2;
- } else if (operation == SENSORS_PROC_REAL_WRITE) {
- if (*nrels_mag >= 1) {
- data->fan_min[nr - 1] = FAN_TO_REG(results[0],
- DIV_FROM_REG(data->
- fan_div[nr -1]));
- via686a_write_value(client,
- VIA686A_REG_FAN_MIN(nr),
- data->fan_min[nr - 1]);
- }
- }
-}
-
-__attribute__((unused))
-static void via686a_temp(struct i2c_client *client, int operation, int ctl_name,
- int *nrels_mag, long *results)
-{
- struct via686a_data *data = i2c_get_clientdata(client);
- int nr = ctl_name - VIA686A_SYSCTL_TEMP;
-
- if (operation == SENSORS_PROC_REAL_INFO)
- *nrels_mag = 1;
- else if (operation == SENSORS_PROC_REAL_READ) {
- via686a_update_client(client);
- results[0] = TEMP_FROM_REG(data->temp_over[nr]);
- results[1] = TEMP_FROM_REG(data->temp_hyst[nr]);
- results[2] = TEMP_FROM_REG10(data->temp[nr]);
- *nrels_mag = 3;
- } else if (operation == SENSORS_PROC_REAL_WRITE) {
- if (*nrels_mag >= 1) {
- data->temp_over[nr] = TEMP_TO_REG(results[0]);
- via686a_write_value(client,
- VIA686A_REG_TEMP_OVER(nr + 1),
- data->temp_over[nr]);
- }
- if (*nrels_mag >= 2) {
- data->temp_hyst[nr] = TEMP_TO_REG(results[1]);
- via686a_write_value(client,
- VIA686A_REG_TEMP_HYST(nr + 1),
- data->temp_hyst[nr]);
- }
- }
-}
-
-__attribute__((unused))
-static void via686a_alarms(struct i2c_client *client, int operation, int ctl_name,
- int *nrels_mag, long *results)
-{
- struct via686a_data *data = i2c_get_clientdata(client);
- if (operation == SENSORS_PROC_REAL_INFO)
- *nrels_mag = 0;
- else if (operation == SENSORS_PROC_REAL_READ) {
- via686a_update_client(client);
- results[0] = ALARMS_FROM_REG(data->alarms);
- *nrels_mag = 1;
- }
-}
-
-__attribute__((unused))
-static void via686a_fan_div(struct i2c_client *client, int operation,
- int ctl_name, int *nrels_mag, long *results)
-{
- struct via686a_data *data = i2c_get_clientdata(client);
- int old;
-
- if (operation == SENSORS_PROC_REAL_INFO)
- *nrels_mag = 0;
- else if (operation == SENSORS_PROC_REAL_READ) {
- via686a_update_client(client);
- results[0] = DIV_FROM_REG(data->fan_div[0]);
- results[1] = DIV_FROM_REG(data->fan_div[1]);
- *nrels_mag = 2;
- } else if (operation == SENSORS_PROC_REAL_WRITE) {
- old = via686a_read_value(client, VIA686A_REG_FANDIV);
- if (*nrels_mag >= 2) {
- data->fan_div[1] = DIV_TO_REG(results[1]);
- old = (old & 0x3f) | (data->fan_div[1] << 6);
- }
- if (*nrels_mag >= 1) {
- data->fan_div[0] = DIV_TO_REG(results[0]);
- old = (old & 0xcf) | (data->fan_div[0] << 4);
- via686a_write_value(client, VIA686A_REG_FANDIV,
- old);
- }
- }
-}
-
-
static struct pci_device_id via686a_pci_ids[] __devinitdata = {
{
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_82C686_4,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- .driver_data = 0,
},
{ 0, }
};
