ChangeSet 1.1196, 2003/03/21 16:45:59-08:00, greg at kroah.com
i2c: ugh, clean up lindent mess in i2c-proc.c::i2c_detect()
Yes, this function now goes beyond 80 columns, but it's almost
readable, while the previous version was not.
Also removed some #ifdefs
drivers/i2c/i2c-proc.c | 180 ++++++++++++-------------------------------------
1 files changed, 47 insertions(+), 133 deletions(-)
diff -Nru a/drivers/i2c/i2c-proc.c b/drivers/i2c/i2c-proc.c
--- a/drivers/i2c/i2c-proc.c Fri Mar 21 16:52:31 2003
+++ b/drivers/i2c/i2c-proc.c Fri Mar 21 16:52:31 2003
@@ -23,6 +23,8 @@
This driver puts entries in /proc/sys/dev/sensors for each I2C device
*/
+/* #define DEBUG 1 */
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -581,9 +583,9 @@
is_isa ? SENSORS_ISA_BUS : i2c_adapter_id(adapter);
/* Forget it if we can't probe using SMBUS_QUICK */
- if ((!is_isa)
- && !i2c_check_functionality(adapter,
- I2C_FUNC_SMBUS_QUICK)) return -1;
+ if ((!is_isa) &&
+ !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK))
+ return -1;
for (addr = 0x00; addr <= (is_isa ? 0xffff : 0x7f); addr++) {
/* XXX: WTF is going on here??? */
@@ -594,31 +596,14 @@
/* If it is in one of the force entries, we don't do any
detection at all */
found = 0;
- for (i = 0;
- !found
- && (this_force =
- address_data->forces + i, this_force->force); i++) {
- for (j = 0;
- !found
- && (this_force->force[j] != SENSORS_I2C_END);
- j += 2) {
- if (
- ((adapter_id == this_force->force[j])
- ||
- ((this_force->
- force[j] == SENSORS_ANY_I2C_BUS)
- && !is_isa))
- && (addr == this_force->force[j + 1])) {
-#ifdef DEBUG
- printk
- (KERN_DEBUG "i2c-proc.o: found force parameter for adapter %d, addr %04x\n",
- adapter_id, addr);
-#endif
- if (
- (err =
- found_proc(adapter, addr, 0,
- this_force->
- kind))) return err;
+ for (i = 0; !found && (this_force = address_data->forces + i, this_force->force); i++) {
+ for (j = 0; !found && (this_force->force[j] != SENSORS_I2C_END); j += 2) {
+ if ( ((adapter_id == this_force->force[j]) ||
+ ((this_force->force[j] == SENSORS_ANY_I2C_BUS) && !is_isa)) &&
+ (addr == this_force->force[j + 1]) ) {
+ dev_dbg(&adapter->dev, "found force parameter for adapter %d, addr %04x\n", adapter_id, addr);
+ if ((err = found_proc(adapter, addr, 0, this_force->kind)))
+ return err;
found = 1;
}
}
@@ -628,42 +613,22 @@
/* If this address is in one of the ignores, we can forget about it
right now */
- for (i = 0;
- !found
- && (address_data->ignore[i] != SENSORS_I2C_END);
- i += 2) {
- if (
- ((adapter_id == address_data->ignore[i])
- ||
- ((address_data->
- ignore[i] == SENSORS_ANY_I2C_BUS)
- && !is_isa))
- && (addr == address_data->ignore[i + 1])) {
-#ifdef DEBUG
- printk
- (KERN_DEBUG "i2c-proc.o: found ignore parameter for adapter %d, "
- "addr %04x\n", adapter_id, addr);
-#endif
+ for (i = 0; !found && (address_data->ignore[i] != SENSORS_I2C_END); i += 2) {
+ if ( ((adapter_id == address_data->ignore[i]) ||
+ ((address_data->ignore[i] == SENSORS_ANY_I2C_BUS) &&
+ !is_isa)) &&
+ (addr == address_data->ignore[i + 1])) {
+ dev_dbg(&adapter->dev, "found ignore parameter for adapter %d, addr %04x\n", adapter_id, addr);
found = 1;
}
}
- for (i = 0;
- !found
- && (address_data->ignore_range[i] != SENSORS_I2C_END);
- i += 3) {
- if (
- ((adapter_id == address_data->ignore_range[i])
- ||
- ((address_data->
- ignore_range[i] ==
- SENSORS_ANY_I2C_BUS) & !is_isa))
- && (addr >= address_data->ignore_range[i + 1])
- && (addr <= address_data->ignore_range[i + 2])) {
-#ifdef DEBUG
- printk
- (KERN_DEBUG "i2c-proc.o: found ignore_range parameter for adapter %d, "
- "addr %04x\n", adapter_id, addr);
-#endif
+ for (i = 0; !found && (address_data->ignore_range[i] != SENSORS_I2C_END); i += 3) {
+ if ( ((adapter_id == address_data->ignore_range[i]) ||
+ ((address_data-> ignore_range[i] == SENSORS_ANY_I2C_BUS) &
+ !is_isa)) &&
+ (addr >= address_data->ignore_range[i + 1]) &&
+ (addr <= address_data->ignore_range[i + 2])) {
+ dev_dbg(&adapter->dev, "found ignore_range parameter for adapter %d, addr %04x\n", adapter_id, addr);
found = 1;
}
}
@@ -673,68 +638,31 @@
/* Now, we will do a detection, but only if it is in the normal or
probe entries */
if (is_isa) {
- for (i = 0;
- !found
- && (address_data->normal_isa[i] !=
- SENSORS_ISA_END); i += 1) {
+ for (i = 0; !found && (address_data->normal_isa[i] != SENSORS_ISA_END); i += 1) {
if (addr == address_data->normal_isa[i]) {
-#ifdef DEBUG
- printk
- (KERN_DEBUG "i2c-proc.o: found normal isa entry for adapter %d, "
- "addr %04x\n", adapter_id,
- addr);
-#endif
+ dev_dbg(&adapter->dev, "found normal isa entry for adapter %d, addr %04x\n", adapter_id, addr);
found = 1;
}
}
- for (i = 0;
- !found
- && (address_data->normal_isa_range[i] !=
- SENSORS_ISA_END); i += 3) {
- if ((addr >=
- address_data->normal_isa_range[i])
- && (addr <=
- address_data->normal_isa_range[i + 1])
- &&
- ((addr -
- address_data->normal_isa_range[i]) %
- address_data->normal_isa_range[i + 2] ==
- 0)) {
-#ifdef DEBUG
- printk
- (KERN_DEBUG "i2c-proc.o: found normal isa_range entry for adapter %d, "
- "addr %04x", adapter_id, addr);
-#endif
+ for (i = 0; !found && (address_data->normal_isa_range[i] != SENSORS_ISA_END); i += 3) {
+ if ((addr >= address_data->normal_isa_range[i]) &&
+ (addr <= address_data->normal_isa_range[i + 1]) &&
+ ((addr - address_data->normal_isa_range[i]) % address_data->normal_isa_range[i + 2] == 0)) {
+ dev_dbg(&adapter->dev, "found normal isa_range entry for adapter %d, addr %04x", adapter_id, addr);
found = 1;
}
}
} else {
- for (i = 0;
- !found && (address_data->normal_i2c[i] !=
- SENSORS_I2C_END); i += 1) {
+ for (i = 0; !found && (address_data->normal_i2c[i] != SENSORS_I2C_END); i += 1) {
if (addr == address_data->normal_i2c[i]) {
found = 1;
-#ifdef DEBUG
- printk
- (KERN_DEBUG "i2c-proc.o: found normal i2c entry for adapter %d, "
- "addr %02x", adapter_id, addr);
-#endif
+ dev_dbg(&adapter->dev, "found normal i2c entry for adapter %d, addr %02x", adapter_id, addr);
}
}
- for (i = 0;
- !found
- && (address_data->normal_i2c_range[i] !=
- SENSORS_I2C_END); i += 2) {
- if ((addr >=
- address_data->normal_i2c_range[i])
- && (addr <=
- address_data->normal_i2c_range[i + 1]))
- {
-#ifdef DEBUG
- printk
- (KERN_DEBUG "i2c-proc.o: found normal i2c_range entry for adapter %d, "
- "addr %04x\n", adapter_id, addr);
-#endif
+ for (i = 0; !found && (address_data->normal_i2c_range[i] != SENSORS_I2C_END); i += 2) {
+ if ((addr >= address_data->normal_i2c_range[i]) &&
+ (addr <= address_data->normal_i2c_range[i + 1])) {
+ dev_dbg(&adapter->dev, "found normal i2c_range entry for adapter %d, addr %04x\n", adapter_id, addr);
found = 1;
}
}
@@ -747,30 +675,17 @@
((address_data->
probe[i] == SENSORS_ANY_I2C_BUS) & !is_isa))
&& (addr == address_data->probe[i + 1])) {
-#ifdef DEBUG
- printk
- (KERN_DEBUG "i2c-proc.o: found probe parameter for adapter %d, "
- "addr %04x\n", adapter_id, addr);
-#endif
+ dev_dbg(&adapter->dev, "found probe parameter for adapter %d, addr %04x\n", adapter_id, addr);
found = 1;
}
}
- for (i = 0; !found &&
- (address_data->probe_range[i] != SENSORS_I2C_END);
- i += 3) {
- if (
- ((adapter_id == address_data->probe_range[i])
- ||
- ((address_data->probe_range[i] ==
- SENSORS_ANY_I2C_BUS) & !is_isa))
- && (addr >= address_data->probe_range[i + 1])
- && (addr <= address_data->probe_range[i + 2])) {
+ for (i = 0; !found && (address_data->probe_range[i] != SENSORS_I2C_END); i += 3) {
+ if ( ((adapter_id == address_data->probe_range[i]) ||
+ ((address_data->probe_range[i] == SENSORS_ANY_I2C_BUS) & !is_isa)) &&
+ (addr >= address_data->probe_range[i + 1]) &&
+ (addr <= address_data->probe_range[i + 2])) {
found = 1;
-#ifdef DEBUG
- printk
- (KERN_DEBUG "i2c-proc.o: found probe_range parameter for adapter %d, "
- "addr %04x\n", adapter_id, addr);
-#endif
+ dev_dbg(&adapter->dev, "found probe_range parameter for adapter %d, addr %04x\n", adapter_id, addr);
}
}
if (!found)
@@ -779,8 +694,7 @@
/* OK, so we really should examine this address. First check
whether there is some client here at all! */
if (is_isa ||
- (i2c_smbus_xfer
- (adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) >= 0))
+ (i2c_smbus_xfer (adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) >= 0))
if ((err = found_proc(adapter, addr, 0, -1)))
return err;
}
