On Thu, Mar 13, 2003 at 04:55:00PM -0800, Greg KH wrote:
> +/* Detect whether a ALI15X3 can be found, and initialize it, where necessary.
> + Note the differences between kernels with the old PCI BIOS interface and
> + newer kernels with the real PCI interface. In compat.h some things are
> + defined to make the transition easier. */
This comment seems a bit outdated..
> +int ali15x3_setup(void)
Should be static like everything in this file (and merged into
ali15x3_probe anyway).
> +{
> + u16 a;
> + unsigned char temp;
> +
> + struct pci_dev *ALI15X3_dev;
> +
> + /* First check whether we can access PCI at all */
> + if (pci_present() == 0) {
> + printk("i2c-ali15x3.o: Error: No PCI-bus found!\n");
> + return -ENODEV;
> + }
You're calling this from pci_driver->probe, so you will never get
here without PCI hardware.
> + /* Look for the ALI15X3, M7101 device */
> + ALI15X3_dev = NULL;
> + ALI15X3_dev = pci_find_device(PCI_VENDOR_ID_AL,
> + PCI_DEVICE_ID_AL_M7101, ALI15X3_dev);
> + if (ALI15X3_dev == NULL) {
> + printk("i2c-ali15x3.o: Error: Can't detect ali15x3!\n");
> + return -ENODEV;
> + }
Calling pci_find_device in ->probe looks buggy to me. What are you
trying to do?
> +/* Is SMB Host controller enabled? */
> + pci_read_config_byte(ALI15X3_dev, SMBHSTCFG, &temp);
> + if ((temp & 1) == 0) {
What about proper indentation for the comments?
> +/* Internally used pause function */
> +void ali15x3_do_pause(unsigned int amount)
> +{
> + current->state = TASK_INTERRUPTIBLE;
> + schedule_timeout(amount);
> +}
I think this should be moved to linux/kernel.h as delay() - I've seen
it duplicated in so much code (including XFS)
> +#ifdef DEBUG
> + printk
> + ("i2c-ali15x3.o: Transaction (pre): STS=%02x, CNT=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, "
> + "DAT1=%02x\n", inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
> + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
> + inb_p(SMBHSTDAT1));
> +#endif
use pr_debug() here.
> +static struct pci_device_id ali15x3_ids[] __devinitdata = {
> + { 0, }
> +};
Umm?
