> > normally (at least after booting the machine) sensors reports for > > the point "beep_enable" the value "Sound alarm disabled". but when > > the machine wakes up after a suspension (generated by "apm -s", > > which do a suspend to ram and switch off all fans as it is > > configured by me through the bios-setup) i get a permanent beeping. > > now sensors reports "Sound alarm enabled" for "beep_enable". my > > question is: how can i permanently switch"beep_enable" to "Sound > > alarm disabled"? > If APM is changing the sensor settings than you can't permanently do > anything without changing APM. BTW, is there a way to enable or disable this beeping using sensors? I just took a look at the documentation and couldn't find anything related to it. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
