Hi Jakob, List, I believe , that you chip supported by us. If you willing , then: 1. try to load i2c-sis630 module with force=1 (pls look in doc directory for details!) 2. if i2c-sis630 does not work for you , try i2c-sis645 module (pls contact the autor of this module , before you try this. Or you can just hack the module for your PCI_ID). If you have more quastions , pls contact me... Am Samstag, 28. Dezember 2002 18:03 schrieben Sie: > >Hi Jakob, > > > >can you please send lspci -vvv -xxx ? > >We will see , if your chip supported ... > > I enclose /attach the output of lspci. Sorry I did not answer earlier > but during the holidays I had no access to the machine. > > Yours, > Jakob Curdes > > >Am Donnerstag, 19. Dezember 2002 12:40 schrieb Jakob Curdes: > >>Hi, > >> > >>I found that the SiS 648 is not supported yet. > >>Although I have some programming skills, I have no experience with > >>mainboard sensors. What should I read for a start to determine if I > > > >can > > > >>develop a driver for this chip ?? > >> > >>Yours, > >>Jakob Curdes > >>iS information Systems oHG > >> > >> > >> > >> ------------------------------------------------------------------------ > >> > >> Subject: > >> Re: support for SIS 648 - hint for starting > >> From: > >> Alexander Malysh <amalysh at web.de> > >> Date: > >> Thu, 19 Dec 2002 14:56:16 +0100 > >> To: > >> Jakob Curdes <jc at info-systems.de>, sensors at Stimpy.netroedge.com > >> > >> > >>Hi Jakob, > >> > >>can you please send lspci -vvv -xxx ? > >>We will see , if your chip supported ... > >> > >>Am Donnerstag, 19. Dezember 2002 12:40 schrieb Jakob Curdes: > >>>Hi, > >>> > >>>I found that the SiS 648 is not supported yet. > >>>Although I have some programming skills, I have no experience with > >>>mainboard sensors. What should I read for a start to determine if I can > >>>develop a driver for this chip ?? > >>> > >>>Yours, > >>>Jakob Curdes > >>>iS information Systems oHG
