Ok, my sensors are up and running or at least some of them. Can you tell me
what the output means after the data:
w83782d-i2c-0-28
Adapter: SMBus PIIX4 adapter at e800
Algorithm: Non-I2C SMBus adapter
VCore 1: +1.45 V (min = +4.08 V, max = +4.08 V)
VCore 2: +2.78 V (min = +4.08 V, max = +4.08 V)
+3.3V: +2.80 V (min = +2.97 V, max = +3.63 V)
+5V: +4.94 V (min = +4.50 V, max = +5.48 V)
+12V: +11.25 V (min = +10.79 V, max = +13.11 V)
-12V: +0.30 V (min = -13.21 V, max = -10.90 V)
-5V: +1.62 V (min = -5.51 V, max = -4.51 V)
V5SB: +4.70 V (min = +4.50 V, max = +5.48 V)
VBat: +3.18 V (min = +2.70 V, max = +3.29 V)
fan1: 0 RPM (min = 3000 RPM, div = 2)
fan2: 0 RPM (min = 3000 RPM, div = 2)
fan3: 0 RPM (min = 3000 RPM, div = 2)
temp1: -48??C (limit = +60??C) sensor =
thermistor
temp2: +45.0??C (limit = +60??C, hysteresis = +50??C) sensor =
thermistor
temp3: +43.5??C (limit = +60??C, hysteresis = +50??C) sensor =
thermistor
vid: +1.450 V
alarms:
beep_enable:
Sound alarm disabled
eeprom-i2c-0-50
Adapter: SMBus PIIX4 adapter at e800
Algorithm: Non-I2C SMBus adapter
eeprom-i2c-0-51
Adapter: SMBus PIIX4 adapter at e800
Algorithm: Non-I2C SMBus adapter
eeprom-i2c-0-54
Adapter: SMBus PIIX4 adapter at e800
Algorithm: Non-I2C SMBus adapter
eeprom-i2c-0-55
Adapter: SMBus PIIX4 adapter at e800
Algorithm: Non-I2C SMBus adapter
eeprom-i2c-0-56
Adapter: SMBus PIIX4 adapter at e800
Algorithm: Non-I2C SMBus adapter
eeprom-i2c-0-57
Adapter: SMBus PIIX4 adapter at e800
Algorithm: Non-I2C SMBus adapter
Thanks for your help and hints.
Zeno
