you must not really be running sensors-detect from our 2.6.4 release. We added support for the 697HF in 2.6.3. Andrea Parenti wrote: > > .../lm_sensors-2.6.4/prog/detect/sensors-detect > > gives this result: > ... > Probing for `Winbond W83697HF' > Trying address 0x0290... Success! > (confidence 8, driver `Unwritten (W83697HF)') > ... > > Does it mean that "there is no driver for the chip "Winbond w83697hf"?? > But i read that the driver w83781d should fit. > > If I do: > > modprobe w83781d > > I got "No sensors found!" > > This is my "lsmod": > > inux:/home/andrea # lsmod > Module Size Used by Tainted: P > w83781d 16672 0 (unused) > i2c-proc 6016 0 [w83781d] > pppoe 6752 1 (autoclean) > pppox 1064 1 (autoclean) [pppoe] > af_packet 11528 1 (autoclean) > ppp_generic 14984 3 (autoclean) [pppoe pppox] > slhc 4432 0 (autoclean) [ppp_generic] > snd-mixer-oss 11136 1 (autoclean) > agpgart 29664 3 (autoclean) > NVdriver 989760 10 (autoclean) > parport_pc 25448 1 (autoclean) > lp 5824 0 (autoclean) > parport 21856 1 (autoclean) [parport_pc lp] > snd-seq-midi 4480 0 (autoclean) (unused) > snd-emu10k1-synth 5504 0 (autoclean) > snd-emux-synth 28480 0 (autoclean) [snd-emu10k1-synth] > snd-seq-midi-emul 4560 0 (autoclean) [snd-emux-synth] > snd-seq-virmidi 3720 0 (autoclean) [snd-emux-synth] > snd-seq-oss 24128 0 (autoclean) > snd-seq-midi-event 2664 0 (autoclean) [snd-seq-midi > snd-seq-virmidi snd-seq-oss] > snd-seq 39596 2 (autoclean) [snd-seq-midi > snd-emux-synth snd-seq-midi-emul snd-seq-virmidi snd-seq-oss > snd-seq-midi-event] > snd-emu10k1 62820 1 [snd-emu10k1-synth] > snd-pcm 58528 0 [snd-emu10k1] > snd-timer 11456 0 [snd-seq snd-pcm] > snd-hwdep 4736 0 [snd-emu10k1] > snd-util-mem 1472 0 [snd-emux-synth snd-emu10k1] > snd-rawmidi 13536 0 [snd-seq-midi snd-seq-virmidi snd-emu10k1] > ipv6 123424 -1 (autoclean) > snd-seq-device 4336 0 [snd-seq-midi snd-emu10k1-synth > snd-emux-synth snd-seq-oss snd-seq snd-emu10k1 snd-rawmidi] > snd-ac97-codec 24196 0 [snd-emu10k1] > snd 31720 0 [snd-mixer-oss snd-seq-midi > snd-emu10k1-synth snd-emux-synth snd-seq-midi-emul snd-seq-virmidi > snd-seq-oss snd-seq-midi-event snd-seq snd-emu10k1 snd-pcm snd-timer > snd-hwdep snd-util-mem snd-rawmidi snd-seq-device snd-ac97-codec] > soundcore 3268 7 [snd] > isa-pnp 27816 0 (unused) > joydev 5728 0 (unused) > evdev 3904 0 (unused) > mousedev 3872 1 > hid 17824 0 (unused) > input 3072 0 [joydev evdev mousedev hid] > st 25844 0 (autoclean) (unused) > sg 23620 0 (autoclean) > 3c59x 25032 1 > ipt_REJECT 2752 1 (autoclean) > ipt_LOG 3168 1 (autoclean) > iptable_nat 12756 0 (autoclean) (unused) > ip_conntrack 12652 1 (autoclean) [iptable_nat] > iptable_filter 1728 1 (autoclean) > ip_tables 10400 6 [ipt_REJECT ipt_LOG iptable_nat > iptable_filter] > i2c-isa 1220 0 (unused) > i2c-core 12320 0 [w83781d i2c-proc i2c-isa] > usb-uhci 20996 0 (unused) > usbcore 55136 1 [hid usb-uhci] > ide-scsi 7648 0 > reiserfs 158816 1 > linux:/home/andrea # sensors -s > No sensors found! > > Any help appreciated!! > Motherboard: Epox 8KHA+ > System: SuSE linux 8.0.
