see the many tickets on this topic. links on our 'old news' page. Andrew Bray wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > > Folks, > > This motherboard is claimed in its manual of having a Winbond W83627HF > Super I/O ASIC and as a build option a Winbond W83627D hardware > monitoring. > > The Winbond W83627D hardware monitoring chip is claimed to include: > 3-pin fan monitoring headers > 2-pin chassis intrusion header > CPU temperature and voltage monitoring > > The Winbond web site doesn't have data on the W83627D chip. > > lm_sensors 2.6.4 detects a w83627hf at SMBUS address 0x2c, and a w83782d > at address 0x2d. > > There are only two subclients detected at addresses 0x48 and 0x49. > > I have a suspidin that a W83627D is actually a W83782D with no subclients. > > Anyway, I cannot have both installed at once, because of a lack of > subclient addresses. > > I have created a shell script that dumps all the files in > /proc/sys/dev/sensors/w*/*. > > Here is the output of my script and 'sensors' for the two chips (I used > init=0 to retain the BIOS initialisation): > > > insmod w83781d ignore=0,0x2d init=0 > > > > w83627hf-i2c-0-2c: > > alarms=4096 > > beep=0 0 > > fan1=750 0 > > fan2=750 0 > > fan3=750 0 > > fan_div=8 8 8 > > in0=4.08 4.08 1.74 > > in1=4.08 4.08 1.72 > > in2=2.97 3.63 3.29 > > in3=2.68 3.26 2.94 > > in4=2.84 3.45 2.91 > > in5=0.33 0.78 0.59 > > in6=0.70 1.02 0.72 > > in7=2.68 3.26 3.21 > > in8=2.70 3.29 0.00 > > pwm1=255 > > pwm2=255 > > sensor1=2 > > sensor2=2 > > sensor3=2 > > temp1=60.0 127.0 56.0 > > temp2=72.5 32.0 40.5 > > temp3=72.5 32.0 45.0 > > vid=1.850 > > vrm=8.2 > > > > w83627hf-i2c-0-2c > > Adapter: SMBus AMD766 adapter at 80e0 > > Algorithm: Non-I2C SMBus adapter > > VCore 1: +1.74 V (min = +4.08 V, max = +4.08 V) > > VCore 2: +1.74 V (min = +4.08 V, max = +4.08 V) > > +3.3V: +3.29 V (min = +2.97 V, max = +3.63 V) > > +5V: +4.94 V (min = +4.50 V, max = +5.48 V) > > +12V: +11.06 V (min = +10.79 V, max = +13.11 V) > > -12V: -11.88 V (min = -13.21 V, max = -10.90 V) > > -5V: -5.45 V (min = -5.51 V, max = -4.51 V) ALARM > > V5SB: +5.39 V (min = +4.50 V, max = +5.48 V) > > VBat: +0.00 V (min = +2.70 V, max = +3.29 V) > > The BIOS hardware monitor page lists core voltages, plus +6 and +/-12V > foltages, which closely match these here. > > > fan1: 0 RPM (min = 750 RPM, div = 8) > > fan2: 0 RPM (min = 750 RPM, div = 8) > > fan3: 0 RPM (min = 750 RPM, div = 8) > > The BIOS lists 2 CPU fans, and 4 chassis fans. The chassis fans were all > reported at 0 RPM. > > > temp1: +55?C (limit = +60?C) sensor = 3904 transistor > > temp2: +41.5?C (limit = +72?C, hysteresis = +32?C) sensor = 3904 transistor > > temp3: +45.0?C (limit = +72?C, hysteresis = +32?C) sensor = 3904 transistor > > The BIOS only lists 2 temperature for the two CPUs, which wwere both 43 degC > > > vid: +1.850 V > > alarms: Chassis intrusion detection ALARM > > My case does not make any connection with the chassis intrusion connector > on the mootherboard. > > > beep_enable: > > Sound alarm disabled > > > > insmod w83781d ignore=0,0x2c init=0 > > w83782d-i2c-0-2d: > > alarms=198656 > > beep=1 0 > > fan1=3000 5314 > > fan2=3000 5152 > > fan3=1500 0 > > fan_div=2 2 4 > > in0=4.08 4.08 1.76 > > in1=4.08 4.08 2.84 > > in2=2.97 3.63 1.52 > > in3=2.68 3.26 2.86 > > in4=2.84 3.45 1.23 > > in5=0.33 0.78 2.48 > > in6=0.70 1.02 3.29 > > in7=2.68 3.26 2.51 > > in8=2.70 3.29 0.00 > > pwm1=255 > > pwm2=255 > > pwm3=255 > > pwm4=255 > > sensor1=2 > > sensor2=2 > > sensor3=2 > > temp1=100.0 127.0 46.0 > > temp2=72.5 32.0 41.5 > > temp3=72.5 32.0 45.0 > > vid=1.850 > > vrm=8.2 > > > > w83782d-i2c-0-2d > > Adapter: SMBus AMD766 adapter at 80e0 > > Algorithm: Non-I2C SMBus adapter > > VCore 1: +1.76 V (min = +4.08 V, max = +4.08 V) > > VCore 2: +2.84 V (min = +4.08 V, max = +4.08 V) > > +3.3V: +1.53 V (min = +2.97 V, max = +3.63 V) > > +5V: +4.80 V (min = +4.50 V, max = +5.48 V) > > +12V: +4.56 V (min = +10.79 V, max = +13.11 V) > > -12V: -2.16 V (min = -13.21 V, max = -10.90 V) > > -5V: +2.62 V (min = -5.51 V, max = -4.51 V) > > V5SB: +4.22 V (min = +4.50 V, max = +5.48 V) > > VBat: +0.00 V (min = +2.70 V, max = +3.29 V) > > These voltages don't seem to corrrespond with anything reported by th > BIOS. > > > fan1: 5314 RPM (min = 3000 RPM, div = 2) > > fan2: 5113 RPM (min = 3000 RPM, div = 2) > > These are very close to the CPU fan speeds reported by the BIOS. > > > fan3: 0 RPM (min = 1500 RPM, div = 4) > > temp1: +46?C (limit = +100?C) sensor = 3904 transistor > > temp2: +42.0?C (limit = +72?C, hysteresis = +32?C) sensor = 3904 transistor > > temp3: +32.0?C (limit = +72?C, hysteresis = +32?C) sensor = 3904 transistor > > These traces were taken only a minute or two apart, as both tests were > using the same subcliient addresses. > > I would have expected the same temperature readings in both tests. > > > vid: +1.850 V > > alarms: > > beep_enable: > > Sound alarm enabled > > To conclude: > > 1. Does it look like I have analysed things correctly? > > 2. Is there a way I can use force_subclients to operate one of the two > Winbond chips without subclients, and have both installed at once? > > Regards, > > Andy > > - -- > - ----------------------------------------------------------------------------- > Andrew Bray, PWMS, MA, | preferred: mailto:andy at chaos.org.uk > London, England | or: mailto:andy at madhouse.demon.co.uk > PGP id/fingerprint: D811F5C9/26 B5 42 C6 F4 00 B2 71 BA EA 9B 81 6C 65 59 07 > > -----BEGIN PGP SIGNATURE----- > Version: 2.6.2i > > iQCVAwUBPVkbl0jMoRfYEfXJAQHS8AP/egFwnjH/EsJfHZSNGq85PPsjZbH8ldNa > FxEblvX/MJXorQQQDnZB2PMf097qERo3dEhqc6f527q1081udxkATnjB6KnWYFZY > 5ZKq+yR2vxx4lwPPWGYTZi01Kz41IAlKHg45ztPXrAmjLBwVMzey/mASKuVpO93O > BrGCE2eEdUU= > =HhjT > -----END PGP SIGNATURE-----
