Whatever you have, we don't support. Sorry. The W83518D does not appear to be a hardware monitor. If you figure out what chip you have, you can watch our New Drivers page for status or if it's not on there let us know. http://www.winbond-usa.com/news/pressrel/09-17-2001.shtml Christian Birchinger wrote: > Hello, > I have the following problem with my lm_sensors2 setup. > > Summary: Detected i2c-viapro + lm75 chips display *only* CPU > temerature > > Details and Systeminfo: > I'm using I2C and lm_sensors2 CVS version from 25 May 2002 > > I have an Asus A7V333/A/R/F Mainboard which shows voltages > fanspeed and CPU temp in the BIOS monitor. > > The sensors-detect script tells me to load: > i2c-viapro, pcf8591 and lm75 > > "dmesg" shows that the "i2c-viapro" finds the device: > i2c-viapro.o: Found Via VT8233A device > > lspci reports this as well: > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge > > Other 2 modules just show: > lm75.o version 2.6.3 (20020322) > pcf8591.o version 2.6.3 (20020322) > > > The lm75 chip *only* reports the CPU temerature: > ~$ sensors > pcf8591-i2c-0-48 > Adapter: SMBus Via Pro adapter at e800 > Algorithm: Non-I2C SMBus adapter > Chan. 0: 255 > Chan. 1: 255 > Chan. 2: 255 > Chan. 3: 255 > Output: 0 (enabled) > > lm75-i2c-0-49 > Adapter: SMBus Via Pro adapter at e800 > Algorithm: Non-I2C SMBus adapter > temp: +60.5?C (limit = +60.0?C, hysteresis = +50.0?C) > (The temp is correct / Don't know if that also means 'bad > values' from the FAQ) > > Loaded Modules are: > Module Size Used by Not tainted > lm75 3264 0 (unused) > i2c-viapro 3848 0 (unused) > pcf8591 3488 0 (unused) > i2c-dev 3968 0 > i2c-proc 6400 0 [lm75 pcf8591] > i2c-core 13512 0 [lm75 i2c-viapro pcf8591 > i2c-dev i2c-proc] > > sensors-detect suggests (and i use this values): > #----cut here---- > # I2C adapter drivers > modprobe i2c-viapro > # I2C chip drivers > modprobe pcf8591 > modprobe lm75 > #----cut here---- > > #----cut here---- > # I2C module options > alias char-major-89 i2c-dev > options pcf8591 ignore=0,0x49 > #----cut here---- > > Procinfo: > ~$ cat /proc/bus/i2c* > i2c-0 smbus SMBus Via Pro adapter at e800 Non-I2C SMBus adapter > 48 PCF8591 chip PCF8591 sensor chip driver > 49 LM75 chip LM75 sensor chip driver > > Additional (failed) attempts: > The FAQ also says that some "lm75" are in fact "W83781D" chips. > I don't get any datas when i load the "W83781D" module. > I could not find a chip with a known name on the mainboard (sorry). > Only found something labled "W83L518D". Don't know if thats > sensor related. > There is only the "temp" output when the lm75 module is loaded > (it also takes 1-2 sec to load the lm75 module which tells me > it really detected something.) > > If i can help in any way please send me an email. > Thanks for your help. >
