phil at netroedge.com wrote: > >>2) There is 3 fields in the i2c_algo_bit_data structure for timing: udelay, >>mdelay, timeout. What should I make this? I've made them 80, 80, 100 >>respectively (stolen from Russell King's acorn RTC driver), but I'm not sure >>if this is the best selection... > > > Humm... I'll have to punt this to either Mark or Frodo. > > the numbers are half-clock-cycle times in microseconds. So 80 means a clock of approx. 6 kHz which is really slow. Don't know what the difference between udelay and mdelay is, have always seen them the same.
