============================================================
Hi ,
Please help newbie. I have read your FAQ but couldnt find the solution
of this problem.
I have installed lm_sensors and i2c package. kernel version- 2.4.9
I run sensors -s and sensors and get ) values for all the variables.
Please tell me what am I doing wrong ???
Thanks
Gagan
=============================================================
More info:
LSMOD ::>>
[root at zisu-1-7 lm_sensors-2.6.3]# lsmod
Module Size Used by
lm75 3248 0 (unused)
i2c-velleman 1632 0
i2c-dev 4256 0
i2c-i810 2512 0 (unused)
i2c-algo-bit 7520 3 [i2c-velleman i2c-i810]
ltc1710 2688 0 (unused)
eeprom 3584 0 (unused)
lm80 5456 0 (unused)
adm1021 5488 0 (unused)
lm78 6992 0 (unused)
i2c-proc 6576 0 [lm75 ltc1710 eeprom lm80 adm1021 lm78]
i2c-core 13872 0 [lm75 i2c-dev i2c-algo-bit ltc1710
eeprom lm80 adm1021 lm78 i2c-proc]
LSPCI >>
[root at zisu-1-7 lm_sensors-2.6.3]# lspci -n
00:00.0 Class 0600: 8086:7124 (rev 03)
00:01.0 Class 0300: 8086:7125 (rev 03)
00:1e.0 Class 0604: 8086:2418 (rev 02)
00:1f.0 Class 0601: 8086:2410 (rev 02)
00:1f.1 Class 0101: 8086:2411 (rev 02)
00:1f.2 Class 0c03: 8086:2412 (rev 02)
00:1f.5 Class 0401: 8086:2415 (rev 02)
01:04.0 Class 0200: 8086:1229 (rev 08)
I2cDETECT>>
[root at zisu-1-7 lm_sensors-2.6.3]# prog/detect/i2cdetect
Error: No i2c-bus specified!
Syntax: i2cdetect I2CBUS
I2CBUS is an integer
Installed I2C busses:
i2c-0 i2c I810/I815 I2C Adapter Bit-shift
algorithm
i2c-1 i2c I810/I815 DDC Adapter Bit-shift
algorithm
i2c-2 i2c Velleman K8000 Bit-shift
algorithm
[root at zisu-1-7 lm_sensors-2.6.3]# prog/detect/i2cdetect i2c-2
Error: First argument not a number!
Syntax: i2cdetect I2CBUS
I2CBUS is an integer
Installed I2C busses:
i2c-0 i2c I810/I815 I2C Adapter Bit-shift
algorithm
i2c-1 i2c I810/I815 DDC Adapter Bit-shift
algorithm
i2c-2 i2c Velleman K8000 Bit-shift
algorithm
[root at zisu-1-7 lm_sensors-2.6.3]# prog/detect/i2cdetect 2
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-2
You have five seconds to reconsider and press CTRL-C!
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
10: 10 11 12 13 14 15 16 17 UU UU UU 1b 1c 1d 1e 1f
20: UU UU UU UU UU UU UU UU UU UU UU UU UU UU 2e 2f
30: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
40: 40 41 42 43 44 45 46 47 48 49 4a 4b UU UU UU 4f
50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
60: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
70: 70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
DMESG>>
Linux version 2.4.9 (root at dhcp-2-14) (gcc version 2.96 20000731 (Red Hat
Linux 7.1 2.96-98)) #2 Fri May 10 10:47:20 PDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000fef3000 (ACPI NVS)
BIOS-e820: 000000000fef3000 - 000000000ff00000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
On node 0 totalpages: 65264
zone(0): 4096 pages.
zone(1): 61168 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=gagan ro root=305
BOOT_FILE=/boot/bzImage.gagan.May10
Initializing CPU#0
Detected 564.764 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1127.21 BogoMIPS
Memory: 254088k/261056k available (1409k kernel code, 6584k reserved,
393k data, 196k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb0d0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
keyboard: Timeout - AT keyboard not present?
keyboard: Timeout - AT keyboard not present?
hda: Maxtor 96147H8, ATA DISK drive
hdb: Maxtor 96147H8, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 120060864 sectors (61471 MB) w/2048KiB Cache, CHS=7473/255/63, UDMA(66)
hdb: 120060864 sectors (61471 MB) w/2048KiB Cache, CHS=7473/255/63, UDMA(66)
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 >
floppy0: no floppy controllers found
task queue still active
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw at saw.sw.com.sg> and others
PCI: Found IRQ 15 for device 01:04.0
PCI: Sharing IRQ 15 with 00:01.0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:03:B5:00:01:F2, IRQ 15.
Board assembly 558200-009, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected an Intel i810 E Chipset.
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0xd0000000
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
md: linear personality registered
md: raid0 personality registered
md: raid1 personality registered
md: raid5 personality registered
raid5: measuring checksumming speed
8regs : 936.000 MB/sec
32regs : 500.000 MB/sec
pIII_sse : 1160.000 MB/sec
pII_mmx : 1268.400 MB/sec
p5_mmx : 1322.800 MB/sec
raid5: using function: pIII_sse (1160.000 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 196k freed
Adding Swap: 265032k swap-space (priority -1)
Adding Swap: 265032k swap-space (priority -2)
(read) hda10's sb offset: 52452096 [events: 00000018]
(read) hdb10's sb offset: 52452096 [events: 00000018]
md: autorun ...
md: considering hdb10 ...
md: adding hdb10 ...
md: adding hda10 ...
md: created md0
md: bind<hda10,1>
md: bind<hdb10,2>
md: running: <hdb10><hda10>
md: now!
md: hdb10's event counter: 00000018
md: hda10's event counter: 00000018
md0: max total readahead window set to 496k
md0: 2 data-disks, max readahead per data-disk: 248k
raid0: looking at hda10
raid0: comparing hda10(52452096) with hda10(52452096)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at hdb10
raid0: comparing hdb10(52452096) with hda10(52452096)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: zone 0
raid0: checking hda10 ... contained as device 0
(52452096) is smallest!.
raid0: checking hdb10 ... contained as device 1
raid0: zone->nb_dev: 2, size: 104904192
raid0: current zone offset: 52452096
raid0: done.
raid0 : md_size is 104904192 blocks.
raid0 : conf->smallest->size is 104904192 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: updating md0 RAID superblock on device
md: hdb10 [events: 00000019](write) hdb10's sb offset: 52452096
md: hda10 [events: 00000019](write) hda10's sb offset: 52452096
md: ... autorun DONE.
reiserfs: checking transaction log (device 03:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:0b) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 09:00) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
eth0: 0 multicast blocks dropped.i2c-proc.o version 2.6.3 (20020322)
lm78.o version 2.6.3 (20020322)
adm1021.o version 2.6.3 (20020322)
lm80.o version 2.6.3 (20020322)
eeprom.o version 2.6.3 (20020322)
ltc1710.o version 2.6.3 (20020322)
i2c-algo-bit.o: i2c bit algorithm module version 2.6.3 (20020322)
i2c-i810.o version 2.6.3 (20020322)
i2c-i810.o: i810/i815 found.
i2c-i810.o: I810/I815 I2C bus initialized
i2c-i810.o: I810/I815 DDC bus initialized
i2c-dev.o: i2c /dev entries driver module version 2.6.3 (20020322)
i2c-dev.o: Registered 'I810/I815 I2C Adapter' as minor 0
i2c-dev.o: Registered 'I810/I815 DDC Adapter' as minor 1
i2c-algo-pcf.o: i2c pcf8584 algorithm module version 2.6.3 (20020322)
i2c-elektor.o: i2c pcf8584-isa adapter module version 2.6.3 (20020322)
i2c-algo-pcf.o: i2c pcf8584 algorithm module version 2.6.3 (20020322)
i2c-elektor.o: i2c pcf8584-isa adapter module
i2c-elv.o: i2c ELV parallel port adapter module version 2.6.3 (20020322)
i2c-elv.o: Busy was low.
i2c-elv.o: i2c ELV parallel port adapter module
i2c-elv.o: Busy was low.
i2c-velleman.o: i2c Velleman K8000 adapter module version 2.6.3 (20020322)
i2c-dev.o: Registered 'Velleman K8000' as minor 2
i2c-velleman.o: found device at 0x378.
lm75.o version 2.6.3 (20020322)
i2c-core.o: i2c core module version 2.6.3 (20020322)
Below is the result from sensor command:
lm84-i2c-2-18
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
Board: +0?C (min = +0?C, max = +0?C)
CPU: +0?C (min = +0?C, max = +0?C)
lm84-i2c-2-19
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
Board: +0?C (min = +0?C, max = +0?C)
CPU: +0?C (min = +0?C, max = +0?C)
lm84-i2c-2-1a
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
Board: +0?C (min = +0?C, max = +0?C)
CPU: +0?C (min = +0?C, max = +0?C)
lm84-i2c-2-29
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
Board: +0?C (min = +0?C, max = +0?C)
CPU: +0?C (min = +0?C, max = +0?C)
lm84-i2c-2-2a
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
Board: +0?C (min = +0?C, max = +0?C)
CPU: +0?C (min = +0?C, max = +0?C)
lm84-i2c-2-2b
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
Board: +0?C (min = +0?C, max = +0?C)
CPU: +0?C (min = +0?C, max = +0?C)
lm84-i2c-2-4c
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
Board: +0?C (min = +0?C, max = +0?C)
CPU: +0?C (min = +0?C, max = +0?C)
lm84-i2c-2-4d
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
Board: +0?C (min = +0?C, max = +0?C)
CPU: +0?C (min = +0?C, max = +0?C)
lm84-i2c-2-4e
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
Board: +0?C (min = +0?C, max = +0?C)
CPU: +0?C (min = +0?C, max = +0?C)
lm80-i2c-2-20
Adapter: Velleman K8000
Algorithm: Bit-shift algorithmVTT: +0.00 V (min = +0.00 V, max
= +0.00 V)
+3.3V: +0.00 V (min = +0.00 V, max = +0.00 V)
+Vcore: +0.00 V (min = +0.00 V, max = +0.00 V)
+12V: +0.00 V (min = +0.00 V, max = +0.00 V)
-12V: +0.00 V (min = +0.00 V, max = +0.00 V)
-5V: +0.00 V (min = +0.00 V, max = +0.00 V)
fan1: -1 RPM (min = -1 RPM, div = 1)
fan2: -1 RPM (min = -1 RPM, div = 1)
temp: +0.00 ?C (hot:limit = +0?C, hysteresis = +0?C)
(os: limit = +0?C, hysteresis = +0?C)
lm80-i2c-2-21
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
+5V: +0.00 V (min = +0.00 V, max = +0.00 V)
VTT: +0.00 V (min = +0.00 V, max = +0.00 V)
+3.3V: +0.00 V (min = +0.00 V, max = +0.00 V)
+Vcore: +0.00 V (min = +0.00 V, max = +0.00 V)
+12V: +0.00 V (min = +0.00 V, max = +0.00 V)
-12V: +0.00 V (min = +0.00 V, max = +0.00 V)
-5V: +0.00 V (min = +0.00 V, max = +0.00 V)
fan1: -1 RPM (min = -1 RPM, div = 1)
fan2: -1 RPM (min = -1 RPM, div = 1)
temp: +0.00 ?C (hot:limit = +0?C, hysteresis = +0?C)
(os: limit = +0?C, hysteresis = +0?C)
lm80-i2c-2-22
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
+5V: +0.00 V (min = +0.00 V, max = +0.00 V)
VTT: +0.00 V (min = +0.00 V, max = +0.00 V)
+3.3V: +0.00 V (min = +0.00 V, max = +0.00 V)
+Vcore: +0.00 V (min = +0.00 V, max = +0.00 V)
+12V: +0.00 V (min = +0.00 V, max = +0.00 V)
-12V: +0.00 V (min = +0.00 V, max = +0.00 V)
-5V: +0.00 V (min = +0.00 V, max = +0.00 V)
fan1: -1 RPM (min = -1 RPM, div = 1)
fan2: -1 RPM (min = -1 RPM, div = 1)
temp: +0.00 ?C (hot:limit = +0?C, hysteresis = +0?C)
(os: limit = +0?C, hysteresis = +0?C)
lm80-i2c-2-23
Adapter: Velleman K8000
Algorithm: Bit-shift algorithm
+5V: +0.00 V (min = +0.00 V, max = +0.00 V)
VTT: +0.00 V (min = +0.00 V, max = +0.00 V)
+3.3V: +0.00 V (min = +0.00 V, max = +0.00 V)
+Vcore: +0.00 V (min = +0.00 V, max = +0.00 V)
+12V: +0.00 V (min = +0.00 V, max = +0.00 V)
-12V: +0.00 V (min = +0.00 V, max = +0.00 V)
-5V: +0.00 V (min = +0.00 V, max = +0.00 V)
fan1: -1 RPM (min = -1 RPM, div = 1)
fan2: -1 RPM (min = -1 RPM, div = 1)
temp: +0.00 ?C (hot:limit = +0?C, hysteresis = +0?C)
(os: limit = +0?C, hysteresis = +0?C)
lm80-i2c-2-24
Adapter: Velleman K8000
+5V: +0.00 V (min = +0.00 V, max = +0.00 V)
............
