see it87 section of sensors.conf for instructions to fix 3.3V, neg voltages, and temps. mds Mario Giammarco wrote: > > Thank you for so nice and fast support! > > I am so sorry but there was an old sensors-detect floating around in > the path. > > Any way now I have again wrong values. > > I send you output of sensors: > > it87-isa-0290 > Adapter: ISA adapter > Algorithm: ISA algorithm > VCore 1: +1.69 V (min = +1.53 V, max = +1.87 V) > VCore 2: +2.62 V (min = +2.25 V, max = +2.75 V) > +3.3V: +6.62 V (min = +2.96 V, max = +3.60 V) ALARM > +5V: +4.97 V (min = +4.50 V, max = +5.48 V) > +12V: +12.16 V (min = +11.36 V, max = +13.80 V) > -12V: -1.51 V (min = -15.86 V, max = -13.40 V) ALARM > -5V: -8.88 V (min = -10.13 V, max = -9.44 V) ALARM > Stdby: +4.80 V (min = +4.50 V, max = +5.48 V) > VBat: +0.00 V > fan1: 4041 RPM (min = 3000 RPM, div = 2) > fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM > fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM > Temp1/MB: +30?C (min = +20?C, max = +60?C) > Temp2/CPU: -61?C (min = +20?C, max = +60?C) > Temp3: -55?C (min = +20?C, max = +60?C) > > I have only fan1 and temp1/2 > > and dump of 0x295 0x296: > > 0 1 2 3 4 5 6 7 8 9 a b c d e f > 00: 11 06 64 00 00 00 00 00 00 00 00 09 00 a7 ff ff > 10: e1 e1 e1 70 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 6a a4 cf b9 bd d3 45 b3 00 1e c3 c9 00 00 00 00 > 30: 75 60 ac 8d 71 5d cc a8 d8 b2 72 5e 3d 33 cc a8 > 40: 3c 14 3c 14 3c 14 00 00 2d 00 00 00 00 00 00 00 > 50: ff 2a 7f 7f 7f 00 00 00 90 56 06 00 00 00 00 00 > 60: 7f 7f 7f 7f 7f 00 00 00 7f 7f 7f 7f 7f 00 00 00 > 70: 7f 7f 7f 7f 7f 00 00 00 00 00 00 00 00 00 00 00 > 80: 11 06 00 00 00 00 00 00 00 00 00 09 00 a7 ff ff > 90: e1 e1 e1 70 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 6a a4 cf b9 bd d3 45 b3 00 1e c3 c9 00 00 00 00 > b0: 75 60 ac 8d 71 5d cc a8 d8 b2 72 5e 3d 33 cc a8 > c0: 3c 14 3c 14 3c 14 00 00 2d 00 00 00 00 00 00 00 > d0: ff 2a 7f 7f 7f 00 00 00 90 56 06 00 00 00 00 00 > e0: 7f 7f 7f 7f 7f 00 00 00 7f 7f 7f 7f 7f 00 00 00 > f0: 7f 7f 7f 7f 7f 00 00 00 00 00 00 00 00 00 00 00 > > Thank you again! > -- > Mario Giammarco > Via Calamandrei,5-48022 Lugo (RA) ITALY > tel: +39054522965 cell: +39(0)3284146845 > mgiammarco at galactica.it > mgiammarco at libero.it > giammarc at cs.unibo.it
