well first say that I'm impressed about the work in this the
documentation is big and extensive to all people.
I'm sure I'doing something wrong,let's se.
I have a debian sid and the lm package 2.6.2 and kernel 2.4.17.
I install all via kernel patch and modules. in dmesg I can see that I
have i2c-isa (is not i2c-sis5595) i2c-dev and i2c-core up.but as we know
the sis5595 don't charges into kernel:
------------dmesg trucated!--------------------------------------------
i2c-core.o: i2c core module version 2.6.2 (20011118)
i2c-isa.o version 2.6.2 (20011118)
i2c-core.o: adapter ISA main adapter registered as adapter 0.
i2c-isa.o: ISA bus access for i2c modules initialized.
i2c-proc.o version 2.6.2 (20011118)
sis5595.o version 2.6.2 (20011118)
sis5595.o: Error: Looked for SIS5595 but found unsupported device 0630
sis5595.o: SIS5595 not detected, module not inserted.
sis5595.o version 2.6.2 (20011118)
sis5595.o: Error: Looked for SIS5595 but found unsupported device 0630
sis5595.o: SIS5595 not detected, module not inserted.
------------------dmesg truncated---------------------------------------
and I compile the module it87 as our web describes. Now I have the
module it87 loaded into kernel but i2c-isa shows unuset:
-------------------lsmod------------------------------------------------
Module Size Used by Tainted: P
it87 6720 0 (unused)
snd-pcm-oss 34944 1 (autoclean)
snd-mixer-oss 8928 0 (autoclean) [snd-pcm-oss]
snd-card-trident 1792 1 (autoclean)
snd-trident 20160 0 (autoclean) [snd-card-trident]
snd-ac97-codec 22848 0 (autoclean) [snd-trident]
snd-pcm 47296 0 (autoclean) [snd-pcm-oss snd-trident]
snd-timer 10016 0 (autoclean) [snd-pcm]
snd-util-mem 1216 0 (autoclean) [snd-trident]
snd-mpu401-uart 2496 0 (autoclean) [snd-card-trident
snd-trident]
snd-rawmidi 12064 0 (autoclean) [snd-mpu401-uart]
snd-seq-device 3792 0 (autoclean) [snd-trident snd-rawmidi]
snd 24136 0 (autoclean) [snd-pcm-oss snd-mixer-oss
snd-card-trident snd-trident snd-ac97-codec snd-pcm snd-timer
snd-util-mem snd-mpu401-uart snd-rawmidi snd-seq-device]
i2c-proc 6144 0 [it87]
i2c-isa 1220 0 (unused)
i2c-core 12832 0 [it87 i2c-proc i2c-isa]
vfat 9276 2
fat 29112 0 [vfat]
-----------------------------------------------------------------------
and logically then I execute "sensors" any sensors is detected. I
misunderstood something? I assume this is beta but I want to know if I'm
doing something wrong or is my board unsoported
I attach some config files for your interest. Best regards.
--
Pere Castanyer Sarda - XaRz69 at terra.es
Computer Management Technical Engineering Student on UOC - (www.uoc.es)
Member of AEIGi - (www.aeigi.org)
------------------------------
Linux Registered User #232073
Debian GNU Linux User - (www.debian.org)
GNUPG public Inf: pub 1024D/F19A252B
919B 48CC 835C B535 EF18 1A26 09F9 D16D F19A 252B
---------------------------------------------------------------------------
-------------- next part --------------
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 128
Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x2
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: CLEVO/KAPOK Computer: Unknown device 2202
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 1100 [size=16]
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 82)
Subsystem: CLEVO/KAPOK Computer: Unknown device 2202
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at 3200 [size=256]
Region 1: Memory at 24000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=160mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] 7001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 80 (20000ns max)
Interrupt: pin D routed to IRQ 11
Region 0: Memory at 24001000 (32-bit, non-prefetchable) [size=4K]
00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS]: Unknown device 7000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 80 (20000ns max)
Interrupt: pin D routed to IRQ 11
Region 0: Memory at 24002000 (32-bit, non-prefetchable) [size=4K]
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 02)
Subsystem: CLEVO/KAPOK Computer: Unknown device 2202
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (500ns min, 6000ns max)
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 3400 [size=256]
Region 1: Memory at 24003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.6 Modem: Silicon Integrated Systems [SiS]: Unknown device 7013 (rev a0) (prog-if 00 [Generic])
Subsystem: CLEVO/KAPOK Computer: Unknown device 2202
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at 3600 [size=256]
Region 1: I/O ports at 3800 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: 40000000-47ffffff
Prefetchable memory behind bridge: 48000000-4fffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:0a.0 CardBus bridge: Texas Instruments PCI4410 PC card Cardbus Controller (rev 02)
Subsystem: CLEVO/KAPOK Computer: Unknown device 2202
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 1c000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
Memory window 0: 00000000-00000000 (prefetchable)
Memory window 1: 00000000-00000000 (prefetchable)
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
16-bit legacy interface ports at 0001
00:0a.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 8017 (rev 02) (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 2202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (750ns min, 1000ns max), cache line size 04
Interrupt: pin B routed to IRQ 5
Region 0: Memory at 24004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 24008000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 31) (prog-if 00 [VGA])
Subsystem: CLEVO/KAPOK Computer: Unknown device 2202
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
BIST result: 00
Region 0: Memory at 48000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at 40000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=128]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 2.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=15 SBA+ AGP+ 64bit- FW- Rate=x2
-------------- next part --------------
Linux version 2.4.17 (root at debian) (gcc version 2.95.4 (Debian prerelease)) #20 mar feb 19 20:11:35 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
On node 0 totalpages: 114672
zone(0): 4096 pages.
zone(1): 110576 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Debian-dev ro root=308 BOOT_FILE=/boot/bzImage-sensor video=sisfb:mode:1024x768x32,mem:12288
Initializing CPU#0
Detected 996.839 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1985.74 BogoMIPS
Memory: 449208k/458688k available (1127k kernel code, 9092k reserved, 350k data, 204k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xeb2e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.09 <tigran at veritas.com>
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15)
Starting kswapd
ACPI: APM is already active, exiting
sisfb: framebuffer at 0x48000000, mapped to 0xdc804000, size 65536k
sisfb: MMIO at 0x40000000, mapped to 0xe0805000, size 128k
sisfb: LVDS bridge and CHRONTEL TV converter detected
sisfb: mode is 1024x768x32 (60Hz), linelength=4096
init.c: 0x11: c
init.c: 0x0: a3
init.c: 0x1: 7f
init.c: 0x2: 7f
init.c: 0x3: 87
init.c: 0x4: 86
init.c: 0x5: 97
init.c: 0x6: 24
init.c: 0x7: f5
init.c: 0x10: 2
init.c: 0x11: 88
init.c: 0x12: ff
init.c: 0x15: ff
init.c: 0x16: 25
init.c: 0xa: 10
init.c: 0xb: 0
init.c: 0xc: 2
init.c: 0x0e: 0
init.c: 0x09: 60
CRT1VCLK 0x2b: 5a
CRT1VCLK 0x2c: 64
CRT1Mode: 0x19: 0
CRT1Mode: 0x19: 0
CRT1Mode: 0x21: a0
VCLK*** 65 (index 9)
CRT1Mode: 0x07: 3
---08: 3f
---09: 50
---0a: c
---0b: 5c
sisfb: Memory heap starting at 12288K
Console: switching to colour frame buffer device 128x48
fb0: SIS 630 frame buffer device, Version 1.3.11
mdacon: MDA with 8K of memory detected.
Console: switching consoles 13-16 to MDA-2
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: Found IRQ 10 for device 00:01.6
PCI: Sharing IRQ 10 with 00:01.1
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 01
PCI: No IRQ known for interrupt pin A of device 00:00.1. Please try using pci=biosirq.
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS630
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHM2200AT, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63, UDMA(66)
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
sis900.c: v1.08.01 9/25/2001
PCI: Found IRQ 10 for device 00:01.1
PCI: Sharing IRQ 10 with 00:01.6
eth0: ICS LAN PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x3200, IRQ 10, 00:90:f5:06:63:f5.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 380M
agpgart: Detected SiS 630 chipset
agpgart: AGP aperture is 64M @ 0x20000000
[drm] AGP 0.99 on SiS @ 0x20000000 64MB
[drm] Initialized sis 1.0.0 20010503 on minor 0
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 11 for device 00:01.2
PCI: Sharing IRQ 11 with 00:01.3
usb-ohci.c: USB OHCI at membase 0xe083c000, IRQ 11
usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF dbefa200, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: e083c000
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface dbefa200
usb.c: call_policy add, num 1 -- no FS yet
PCI: Found IRQ 11 for device 00:01.3
PCI: Sharing IRQ 11 with 00:01.2
usb-ohci.c: USB OHCI at membase 0xe083e000, IRQ 11
usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF dbefa340, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: e083e000
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface dbefa340
usb.c: call_policy add, num 1 -- no FS yet
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 204k freed
hub.c: port 1 connection change
hub.c: port 1, portstatus 301, change 1, 1.5 Mb/s
hub.c: port 1, portstatus 303, change 10, 1.5 Mb/s
hub.c: USB new device connect on bus2/1, assigned device number 2
usb.c: kmalloc IF dbefa5a0, numif 1
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Logitech
Product: USB Receiver
input0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0
usb.c: hid driver claimed interface dbefa5a0
usb.c: kusbd: /sbin/hotplug add 2
usb.c: kusbd policy returned 0xfffffffe
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
eth0: Media Link On 10mbps half-duplex
i2c-core.o: i2c core module version 2.6.2 (20011118)
i2c-isa.o version 2.6.2 (20011118)
i2c-core.o: adapter ISA main adapter registered as adapter 0.
i2c-isa.o: ISA bus access for i2c modules initialized.
i2c-proc.o version 2.6.2 (20011118)
sis5595.o version 2.6.2 (20011118)
sis5595.o: Error: Looked for SIS5595 but found unsupported device 0630
sis5595.o: SIS5595 not detected, module not inserted.
sis5595.o version 2.6.2 (20011118)
sis5595.o: Error: Looked for SIS5595 but found unsupported device 0630
sis5595.o: SIS5595 not detected, module not inserted.
PCI: Found IRQ 5 for device 00:01.4
PCI: Sharing IRQ 5 with 00:0a.1
VFS: Disk change detected on device ide1(22,0)
ALSA trident.c:3354: spurious interrupt detected: stimer = 0xd0087b, voice->stimer = 0xd00864, delta = 23
sis5595.o version 2.6.2 (20011118)
sis5595.o: Error: Looked for SIS5595 but found unsupported device 0630
sis5595.o: SIS5595 not detected, module not inserted.
sis5595.o version 2.6.2 (20011118)
sis5595.o: Error: Looked for SIS5595 but found unsupported device 0630
sis5595.o: SIS5595 not detected, module not inserted.
it87.o version 2.6.2 (20011118)
i2c-core.o: driver IT87xx sensor driver registered.
sis5595.o version 2.6.2 (20011118)
sis5595.o: Error: Looked for SIS5595 but found unsupported device 0630
sis5595.o: SIS5595 not detected, module not inserted.
sis5595.o version 2.6.2 (20011118)
sis5595.o: Error: Looked for SIS5595 but found unsupported device 0630
sis5595.o: SIS5595 not detected, module not inserted.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 232 bytes
Desc: This is a digitally signed message part
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20020219/33c60a3e/attachment.bin
