Tried to use lm_sensors-2.6.2 (compiled with gcc-3.0.3 release) with kernel-2.4.18-pre7
(also compiled with gcc-3.0.3). It took some minutes to load lm_sensors kernel modules,
but sensors semmed to work after that.
Adding -fno-strict-aliasing to modules compile options fixed that bad
behaviour:
--- Makefile~1 Sat Jun 2 06:41:17 2001
+++ Makefile Mon Jan 28 10:32:01 2002
@@ -170,7 +170,7 @@
-Wcast-align -Wwrite-strings -Wnested-externs -Winline
endif
-MODCFLAGS := $(CFLAGS) -D__KERNEL__ -DMODULE -fomit-frame-pointer
+MODCFLAGS := $(CFLAGS) -D__KERNEL__ -DMODULE -fomit-frame-pointer -fno-strict-aliasing
MODCFLAGS := $(MODCFLAGS) -DEXPORT_SYMTAB
PROGCFLAGS := $(CFLAGS)
ARCFLAGS := $(CFLAGS)
Below is what I see in dmesg (simply for info what parts are actually in use)
Andris
i2c-i810.o version 2.6.2 (20011118)
i2c-i810.o: i810/i815 found.
i2c-dev.o: Registered 'I810/I815 I2C Adapter' as minor 0
i2c-core.o: adapter I810/I815 I2C Adapter registered as adapter 0.
i2c-i810.o: I810/I815 I2C bus initialized
i2c-dev.o: Registered 'I810/I815 DDC Adapter' as minor 1
i2c-core.o: adapter I810/I815 DDC Adapter registered as adapter 1.
i2c-i810.o: I810/I815 DDC bus initialized
i2c-i801.o version 2.6.2 (20011118)
i2c-dev.o: Registered 'SMBus I801 adapter at e800' as minor 2
i2c-core.o: adapter SMBus I801 adapter at e800 registered as adapter 2.
i2c-i801.o: I801 bus detected and initialized
w83781d.o version 2.6.2 (20011118)
i2c-core.o: driver W83781D sensor driver registered.
i2c-core.o: client [AS99127F chip] registered to adapter [SMBus I801 adapter at e800](pos. 0).
i2c-core.o: client [AS99127F subclient] registered to adapter [SMBus I801 adapter at e800](pos. 1).
i2c-core.o: client [AS99127F subclient] registered to adapter [SMBus I801 adapter at e800](pos. 2).
bash-2.05$ sensors
as99127f-i2c-2-2d
Adapter: SMBus I801 adapter at e800
Algorithm: Non-I2C SMBus adapter
VCore 1: +1.64 V (min = +1.56 V, max = +1.72 V)
+3.3V: +3.45 V (min = +3.13 V, max = +3.45 V)
+5V: +5.04 V (min = +4.72 V, max = +5.24 V)
+12V: +11.36 V (min = +10.79 V, max = +13.19 V)
-12V: -11.48 V (min = -10.73 V, max = -13.19 V)
-5V: -4.98 V (min = -4.74 V, max = -5.24 V)
fan1: 4115 RPM (min = 1500 RPM, div = 4)
temp1: +30?C (limit = +60?C, hysteresis = +50?C)
temp2: +35.5?C (limit = +67?C, hysteresis = +60?C)
vid: +1.65 V
alarms: Chassis intrusion detection
