Sorry to hear about your trouble. Yours is the first report we've had about a Toshiba laptop. Perhaps if you go into the BIOS to the sensors screen or let the battery run down it will re-initialize your sensors device? But hopefully the trouble is unrelated to any probing by our software. Good luck. mds tom burkart wrote: > > Hi, > I have used the lm_sensors package to try and look at the i2c devices on a > Toshiba Tecra 8100 laptop with little success. > It now overheats and crashes with extended use. I do not know wether it > was due to probing the i2c bus and changing something or some other > unfortunate combination of events that culminated at about the same time. > So since I saw the warning messages for IBM laptops I thought I would > mention it - just in case. > I would be happy to try and trouble-shoot what may have happened if > someone could give some guidance what to try... > > CPU: Pentium 3/speedstep 750MHz, 128M RAM, 20G HDD,... > Kernel: 2.4.17 > LM_sensors/i2c: 2.6.2 > > tom. > Consultant > > AUSSEC Phone: 61 4 1768 2202 > 339 Blaxland Rd., Ryde NSW 2112 > Email: tom at aussec.com
