don't dispair. Fix core limits in /etc/sensors.conf. Change sensor type for temp2 and temp3. Lower fan divs and set fan limits lower. Tweak 12V formulas. CVS has a couple of 627HF updates also. No idea why our stuff affects your sound, sorry. mds Alexandros Kambas wrote: > > Thank you for all your support. > > the `modprobe w83781d init=0` works and the system no longer locks. > > However, if I call: > > modprobe i2c-dev > modprobe i2c-amd756 > modprobe w83781d init=0 > > from /etc/rc.d/rc.local (RH7.2) while booting up, sound (SB Live Value) won't > play. Not too important as if I leave them out and modprobe them after I boot > sound is ok and it seems they still work so I only mentioning just for the > cause. > > Now, it seems that the readings are completely wrong/out of the blue. > > Here's a typical: > > [root at zeus spxak]# sensors > w83627hf-i2c-0-2c > Adapter: SMBus AMD7X6 adapter at 80e0 > Algorithm: Non-I2C SMBus adapter > VCore 1: +1.87 V (min = +1.93 V, max = +2.14 V) ALARM > VCore 2: +1.84 V (min = +1.93 V, max = +2.14 V) ALARM > +3.3V: +3.29 V (min = +3.13 V, max = +3.45 V) > +5V: +4.70 V (min = +4.72 V, max = +5.24 V) ALARM > +12V: +9.84 V (min = +10.79 V, max = +13.19 V) > -12V: -13.11 V (min = -10.90 V, max = -13.21 V) > -5V: -0.24 V (min = -4.76 V, max = -5.26 V) > V5SB: +5.51 V (min = +4.72 V, max = +5.24 V) > VBat: +0.00 V (min = +2.40 V, max = +3.60 V) > fan1: 3375 RPM (min = 33750 RPM, div = 8) > fan2: 3125 RPM (min = 84375 RPM, div = 8) > fan3: 0 RPM (min = 4963 RPM, div = 8) > temp1: +78.0?C (limit = +81?C, hysteresis = +66?C) sensor = thermistor > > temp2: +4.5?C (limit = +80?C, hysteresis = +75?C) sensor = thermistor > > temp3: +8.0?C (limit = +80?C, hysteresis = +75?C) sensor = thermistor > > vid: +2.05 V > alarms: Chassis intrusion detection > beep_enable: > Sound alarm enabled > > They system should report ~55C for the CPU's. > > I hope that even if my issue is not resolved, you can use the feedback. > > Thank you again > > A. Kambas.
