So are you OK or not, I can't tell from you mail. When you 'grep UTS_RELEASE' in version.h do you get more than one entry or not? If you get more than one, you have to pick the right one and then fix the MODDIR := line. Phillip Pi wrote: > > On Sat, 24 Nov 2001, Mark D. Studebaker wrote: > > > 'ls /lib/modules' > > Odd, the directory is valid. [ant at ANTux-P3 ant]$ ls /lib/modules/ > 2.4.7-10 2.4.7-10BOOT 2.4.7-10debug 2.4.7-10enterprise 2.4.7-10smp > > Makefile shows: > MODDIR := /lib/modules/`grep UTS_RELEASE $(LINUX_HEADERS)/linux/version.h|cut -f 2 -d'"'`/misc > ... and that seems correct to me. > > > or > > do a 'make modules_install' from the source of the kernel > > you are compiling against to see where it is going to > > put the modules > > or > > 'uname -r' if you are running that kernel. > > uname -r shows: 2.4.7-10 which is correct. > > > Phillip Pi wrote: > > > > > > I see: > > > > > > 3.8 'make install' fails on Mandrake kernels > > > > > > Mandrake uses a non-standard version.h file which confuses our Makefile. > > > Edit our Makefile on the 'MODDIR :=' line to hard-code the module > > > directory. > > > > > > Now my question, what do I change the line after MODDIR := to? I don't > > > know where my module directory is. > > > > > > On Sat, 24 Nov 2001, Mark D. Studebaker wrote: > > > > > > > You have a problem we usually see in Mandrake kernels. > > > > See FAQ #3.8 for the fix. > > > > mds > > > > > > > > Phillip Pi wrote: > > > > > > > > > > Hey guys, > > > > > > > > > > I got a little farther after running make xconfig and save my settings, > > > > > but I ran into another problem (make had no errors AFAIK): > > > > > > > > > > [root at ANTux-P3 i2c-2.6.2]# make install > > > > > if [ -n " kernel/i2c-core.o kernel/i2c-dev.o kernel/i2c-algo-bit.o > > > > > kernel/i2c-philips-par.o kernel/i2c-elv.o kernel/i2c-velleman.o > > > > > kernel/i2c-algo-pcf.o kernel/i2c-elektor.o kernel/i2c-proc.o > > > > > kernel/i2c-pport.o" ] ; then \ > > > > > mkdir -p /lib/modules/`grep UTS_RELEASE > > > > > /usr/src/linux-2.4.7-10/include/linux/version.h|cut -f 2 -d'"'`/misc ; \ > > > > > install -o root -g root -m 644 kernel/i2c-core.o kernel/i2c-dev.o > > > > > kernel/i2c-algo-bit.o kernel/i2c-philips-par.o kernel/i2c-elv.o > > > > > kernel/i2c-velleman.o kernel/i2c-algo-pcf.o kernel/i2c-elektor.o > > > > > kernel/i2c-proc.o kernel/i2c-pport.o /lib/modules/`grep UTS_RELEASE > > > > > /usr/src/linux-2.4.7-10/include/linux/version.h|cut -f 2 -d'"'`/misc ; \ > > > > > fi > > > > > install: `/lib/modules/2.4.7-10smp' is a directory > > > > > install: `2.4.7-10BOOT' is a directory > > > > > install: `2.4.7-10enterprise' is a directory > > > > > install: `2.4.7-10debug' is a directory > > > > > make: *** [install-kernel] Error 1 > > > > > > > > > > Does this mean my Kernel source, from Red Hat Linux 7.2 CDs, is bad? > > > > > Thank you in advance for a reply. :) > > > > > > > > On Tue, 20 Nov 2001 phil at netroedge.com wrote: > > > > > > > > > > > You need to at least configure your kernel. If it's a redhat kernel, > > > > > > then there is probably a reasonable default config. 'cd > > > > > > /usr/src/linux-2.4.7-10' and do a 'make xconfig' (or menuconfig, or > > > > > > config) and leave the settings as the defaults and save the config. > > > > > > It creates the .config file and also creates some symlinks to include > > > > > > files which are needed for your specific hardware. If that kernel > > > > > > source isn't the exact which was used to make your running kernel, > > > > > > then you'll have troubles getting the modules to work. In that case, > > > > > > you won't be able to get around configuring and building the kernel, > > > > > > rebooting, and then building lm-sensors. > > > > > > > > > > > > > > > > > > Phil > > > > > > > > > > > > > > > > > > On Tue, Nov 20, 2001 at 01:59:41AM -0800, Phillip Pi wrote: > > > > > > > Hi. I am trying to compile and install i2c-2.6.2 and lm_sensors-2.6.2 on > > > > > > > my new Red Hat Linux v7.2 box. I haven't upgraded and tweaked my Kernel > > > > > > > v2.4.7-10 yet. Do I still need to download the Kernel source from > > > > > > > kernel.org even though I see the source (installed from CD installation)? > > > > > > > > > > > > > > If not, then I am having problems compiling after make all. When I do make > > > > > > > install, I get this: > > > > > > > > > > > > > > [root at ANTux-P3 i2c-2.6.2]# make install > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > grep: /usr/src/linux-2.4.7-10/.config: No such file or directory > > > > > > > if [ -n " kernel/i2c-core.o kernel/i2c-dev.o kernel/i2c-algo-bit.o > > > > > > > kernel/i2c-philips-par.o kernel/i2c-elv.o kernel/i2c-velleman.o > > > > > > > kernel/i2c-algo-pcf.o kernel/i2c-elektor.o kernel/i2c-proc.o > > > > > > > kernel/i2c-pport.o" ] ; then \ > > > > > > > mkdir -p /lib/modules/`grep UTS_RELEASE > > > > > > > /usr/src/linux-2.4.7-10/include/linux/version.h|cut -f 2 -d'"'`/misc ; \ > > > > > > > install -o root -g root -m 644 kernel/i2c-core.o kernel/i2c-dev.o > > > > > > > kernel/i2c-algo-bit.o kernel/i2c-philips-par.o kernel/i2c-elv.o > > > > > > > kernel/i2c-velleman.o kernel/i2c-algo-pcf.o kernel/i2c-elektor.o > > > > > > > kernel/i2c-proc.o kernel/i2c-pport.o /lib/modules/`grep UTS_RELEASE > > > > > > > /usr/src/linux-2.4.7-10/include/linux/version.h|cut -f 2 -d'"'`/misc ; \ > > > > > > > fi > > > > > > > install: `/lib/modules/2.4.7-10smp' is a directory > > > > > > > install: `2.4.7-10BOOT' is a directory > > > > > > > install: `2.4.7-10enterprise' is a directory > > > > > > > install: `2.4.7-10debug' is a directory > > > > > > > make: *** [install-kernel] Error 1 > > > > > > > > > > > > > > Am I doing something wrong? I am still new with Linux so I might be doing > > > > > > > something wrong. I hope I don't have to fiddle with the Kernel. Note: I2C > > > > > > > is not built in my kernel according to its make xconfig. Also, I did edit > > > > > > > Makefile to have it point to /usr/src/linux-2.4.7-10 for source files.
