sure, we'll take it. You should get i2cdump working first. If you are using i2c-algo-bit, you can use modprobe i2c-algo-bit bit_test=1 debug=2 (IIRC - check the source) to help debug things mds Alexander Wold wrote: > > Hello, > > I have recently created an i2c driver for the Savage4. It is based upon > the i2c-voodoo3 driver. The main motivation was to get access to the > bt868 connected to S3Savge4`s i2c bus. If this driver is of general > interest, I will be happy to submit it to the project. The driver is > complete, and working. There are some issues thow, i2cdump hangs the > bus, and after starting X, writes to the i2c bus don`t work. When > reloading/loading the module in X (or while x is running) it works fine. > > Regards, > Alexander Wold
