Re: [PATCH LINUX v5 2/2] xen: add support for initializing xenstore later as HVM domain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 2023-07-19 18:46:08, Stefano Stabellini wrote:
> On Wed, 19 Jul 2023, Petr Mladek wrote:
> > On Fri 2022-05-13 14:19:38, Stefano Stabellini wrote:
> > > From: Luca Miccio <lucmiccio@xxxxxxxxx>
> > > 
> > > When running as dom0less guest (HVM domain on ARM) the xenstore event
> > > channel is available at domain creation but the shared xenstore
> > > interface page only becomes available later on.
> > > 
> > > In that case, wait for a notification on the xenstore event channel,
> > > then complete the xenstore initialization later, when the shared page
> > > is actually available.
> > > 
> > > The xenstore page has few extra field. Add them to the shared struct.
> > > One of the field is "connection", when the connection is ready, it is
> > > zero. If the connection is not-zero, wait for a notification.
> > 
> > I see the following warning from free_irq() in 6.5-rc2 when running
> > livepatching selftests. It does not happen after reverting this patch.
> > 
> > [  352.168453] livepatch: signaling remaining tasks
> > [  352.173228] ------------[ cut here ]------------
> > [  352.175563] Trying to free already-free IRQ 0
> > [  352.177355] WARNING: CPU: 1 PID: 88 at kernel/irq/manage.c:1893 free_irq+0xbf/0x350
> > [  352.179942] Modules linked in: test_klp_livepatch(EK)
> > [  352.181621] CPU: 1 PID: 88 Comm: xenbus_probe Kdump: loaded Tainted: G            E K    6.5.0-rc2-default+ #535
> > [  352.184754] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
> > [  352.188214] RIP: 0010:free_irq+0xbf/0x350
> > [  352.192211] Code: 7a 08 75 0e e9 36 02 00 00 4c 3b 7b 08 74 5a 48 89 da 48 8b 5a 18 48 85 db 75 ee 44 89 f6 48 c7 c7 58 b0 8b 86 e8 21 0a f5 ff <0f> 0b 48 8b 34 24 4c 89 ef e8 53 bb e3 00 
> > 48 8b 45 40 48 8b 40 78
> > [  352.200079] RSP: 0018:ffffaf0440b4be80 EFLAGS: 00010086
> > [  352.201465] RAX: 0000000000000000 RBX: ffff99f105116c80 RCX: 0000000000000003
> > [  352.203324] RDX: 0000000080000003 RSI: ffffffff8691d4bc RDI: 00000000ffffffff
> > [  352.204989] RBP: ffff99f100052000 R08: 0000000000000000 R09: c0000000ffff7fff
> > [  352.206253] R10: ffffaf0440b4bd18 R11: ffffaf0440b4bd10 R12: ffff99f1000521e8
> > [  352.207451] R13: ffff99f1000520a8 R14: 0000000000000000 R15: ffffffff86f42360
> > [  352.208787] FS:  0000000000000000(0000) GS:ffff99f15a400000(0000) knlGS:0000000000000000
> > [  352.210061] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [  352.210815] CR2: 00007f8415d56000 CR3: 0000000105e36003 CR4: 0000000000370ee0
> > [  352.211867] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > [  352.212912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > [  352.213951] Call Trace:
> > [  352.214390]  <TASK>
> > [  352.214717]  ? __warn+0x81/0x170
> > [  352.215436]  ? free_irq+0xbf/0x350
> > [  352.215906]  ? report_bug+0x10b/0x200
> > [  352.216408]  ? prb_read_valid+0x17/0x20
> > [  352.216926]  ? handle_bug+0x44/0x80
> > [  352.217409]  ? exc_invalid_op+0x13/0x60
> > [  352.217932]  ? asm_exc_invalid_op+0x16/0x20
> > [  352.218497]  ? free_irq+0xbf/0x350
> > [  352.218979]  ? __pfx_xenbus_probe_thread+0x10/0x10
> > [  352.219600]  xenbus_probe+0x7a/0x80
> > [  352.221030]  xenbus_probe_thread+0x76/0xc0
> > [  352.221416]  ? __pfx_autoremove_wake_function+0x10/0x10
> > [  352.221882]  kthread+0xfd/0x130
> > [  352.222191]  ? __pfx_kthread+0x10/0x10
> > [  352.222544]  ret_from_fork+0x2d/0x50
> > [  352.222893]  ? __pfx_kthread+0x10/0x10
> > [  352.223260]  ret_from_fork_asm+0x1b/0x30
> > [  352.223629] RIP: 0000:0x0
> > [  352.223931] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
> > [  352.224488] RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000
> > [  352.225044] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
> > [  352.225571] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
> > [  352.226106] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
> > [  352.226632] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
> > [  352.227171] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> > [  352.227710]  </TASK>
> > [  352.227917] irq event stamp: 22
> > [  352.228209] hardirqs last  enabled at (21): [<ffffffff854240be>] ___slab_alloc+0x68e/0xc80
> > [  352.228914] hardirqs last disabled at (22): [<ffffffff85fe98fd>] _raw_spin_lock_irqsave+0x8d/0x90
> > [  352.229546] softirqs last  enabled at (0): [<ffffffff850fc0ee>] copy_process+0xaae/0x1fd0
> > [  352.230079] softirqs last disabled at (0): [<0000000000000000>] 0x0
> > [  352.230503] ---[ end trace 0000000000000000 ]---
> > 
> > , where the message "livepatch: signaling remaining tasks" means that
> > it might send fake signals to non-kthread tasks.
> > 
> > The aim is to force userspace tasks to enter and leave kernel space
> > so that they might start using the new patched code. It is done
> > this way:
> > 
> > /*
> >  * Sends a fake signal to all non-kthread tasks with TIF_PATCH_PENDING set.
> >  * Kthreads with TIF_PATCH_PENDING set are woken up.
> >  */
> > static void klp_send_signals(void)
> > {
> > [...]
> > 
> > 			/*
> > 			 * Send fake signal to all non-kthread tasks which are
> > 			 * still not migrated.
> > 			 */
> > 			set_notify_signal(task);
> > [...]
> > 
> > The warning is most likely printed in this condition:
> > 
> > const void *free_irq(unsigned int irq, void *dev_id)
> > {
> > 	struct irq_desc *desc = irq_to_desc(irq);
> > 	struct irqaction *action;
> > 	const char *devname;
> > 
> > 	if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
> > 		return NULL;
> > 
> > 
> > See below.
> > 
> > > --- a/drivers/xen/xenbus/xenbus_probe.c
> > > +++ b/drivers/xen/xenbus/xenbus_probe.c
> > > @@ -750,6 +751,20 @@ static void xenbus_probe(void)
> > >  {
> > >  	xenstored_ready = 1;
> > >  
> > > +	if (!xen_store_interface) {
> > > +		xen_store_interface = xen_remap(xen_store_gfn << XEN_PAGE_SHIFT,
> > > +						XEN_PAGE_SIZE);
> > > +		/*
> > > +		 * Now it is safe to free the IRQ used for xenstore late
> > > +		 * initialization. No need to unbind: it is about to be
> > > +		 * bound again from xb_init_comms. Note that calling
> > > +		 * unbind_from_irqhandler now would result in xen_evtchn_close()
> > > +		 * being called and the event channel not being enabled again
> > > +		 * afterwards, resulting in missed event notifications.
> > > +		 */
> > > +		free_irq(xs_init_irq, &xb_waitq);
> > 
> > Is it possbile that this free_irq(), the fake signal, and the warning
> > are somehow related, please?
> 
> I don't know how the fake signal could relate to this,

In short, the fake signal sets TIF_NOTIFY_SIGNAL and wakes
the kthread. It has special handling in signal_pending().
It causes that wait_interruptible() and friends would prematurely
stop waiting.

It is used primary to speedup/unblock livepatching and some io_uring
operations.

I do not know where exactly it triggers the XEN code.

> but it would seem
> that either:
> 1) free_irq is called twice
> 2) free_irq is called but xs_init_irq wasn't initialized before
> 
> For 2) I can see that xenbus_probe() is called in a few cases where
> xs_init_irq wasn't set. Something like the below would make the warning
> go away but it would be nice to figure out which one is the code path
> taken that originally triggered the warning.

I added some debugging messages and:

  + xenbus_probe() was called in xenbus_probe_thread().

  + xenbus_init() returned early after xen_domain() check so that
    xs_init_irq was never initialized.

Note that I use KVM and not XEN:

[    0.000000] Hypervisor detected: KVM
[...]
[    0.072150] Booting paravirtualized kernel on KVM

Anyway, the warning is not longer printed with the patch below.

> diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
> index 58b732dcbfb8..b0a6d121f895 100644
> --- a/drivers/xen/xenbus/xenbus_probe.c
> +++ b/drivers/xen/xenbus/xenbus_probe.c
> @@ -65,7 +65,7 @@
>  #include "xenbus.h"
>  
>  
> -static int xs_init_irq;
> +static int xs_init_irq = -1;
>  int xen_store_evtchn;
>  EXPORT_SYMBOL_GPL(xen_store_evtchn);
>  
> @@ -762,7 +762,8 @@ static void xenbus_probe(void)
>  		 * being called and the event channel not being enabled again
>  		 * afterwards, resulting in missed event notifications.
>  		 */
> -		free_irq(xs_init_irq, &xb_waitq);
> +		if (xs_init_irq >= 0)
> +			free_irq(xs_init_irq, &xb_waitq);
>  	}
>  
>  	/*

Best Regards,
Petr



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux