Re: [PATCH v7 00/11] kallsyms: Optimizes the performance of lookup symbols

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2022/10/27 14:27, Leizhen (ThunderTown) wrote:
> 
> 
> On 2022/10/27 11:26, Leizhen (ThunderTown) wrote:
>>
>>
>> On 2022/10/27 3:03, Luis Chamberlain wrote:
>>> On Wed, Oct 26, 2022 at 02:44:36PM +0800, Leizhen (ThunderTown) wrote:
>>>> On 2022/10/26 1:53, Luis Chamberlain wrote:
>>>>> This answers how we don't use a hash table, the question was *should* we
>>>>> use one?
>>>>
>>>> I'm not the original author, and I can only answer now based on my understanding. Maybe
>>>> the original author didn't think of the hash method, or he has weighed it out.
>>>>
>>>> Hash is a good solution if only performance is required and memory overhead is not
>>>> considered. Using hash will increase the memory size by up to "4 * kallsyms_num_syms +
>>>> 4 * ARRAY_SIZE(hashtable)" bytes, kallsyms_num_syms is about 1-2 million.
> 
> Sorry, 1-2 million ==> 0.1~0.2 million
> 
>>>>
>>>> Because I don't know what hash algorithm will be used, the cost of generating the
>>>> hash value corresponding to the symbol name is unknown now. But I think it's gonna
>>>> be small. But it definitely needs a simpler algorithm, the tool needs to implement
>>>> the same hash algorithm.
>>>
>>> For instance, you can look at evaluating if alloc_large_system_hash() would help.
>>

The following three hash algorithms are compared. The kernel is compiled by defconfig
on arm64.

|---------------------------------------------------------------------------------------|
|                           |             hash &= HASH_TABLE_SIZE - 1                   |
|                           |             number of conflicts >= 1000                   |
|---------------------------------------------------------------------------------------|
|   ARRAY_SIZE(hash_table)  |       crc16        | jhash_one_at_a_time | string hash_32 |
|---------------------------------------------------------------------------------------|
|                           |     345b: 3905     |     0d40: 1013      |   4a4c: 6548   |
|                           |     35bb: 1016     |     35ce: 6549      |   883a: 1015   |
|        0x10000            |     385b: 6548     |     4440: 19126     |   d05f: 19129  |
|                           |     f0ba: 19127    |     7ebe: 3916      |   ecda: 3903   |
|---------------------------------------------------------------------------------------|
|                           |      0ba: 19168    |      440: 19165     |    05f: 19170  |
|                           |      45b: 3955     |      5ce: 6577      |    83a: 1066   |
|        0x1000             |      5bb: 1069     |      d40: 1052      |    a4c: 6609   |
|                           |      85b: 6582     |      ebe: 3938      |    cda: 3924   |
|---------------------------------------------------------------------------------------|

Based on the above test results, I conclude that:
1. For the worst-case scenario, the three algorithms are not much different. But the kernel
   only implements crc16 and string hash_32. The latter is not processed byte-by-byte, so
   it is coupled with byte order and sizeof(long). So crc16 is the best choice.
2. For the worst-case scenario, there are almost 19K strings are mapped to the same hash
   value,just over 1/10 of the total. And with my current compression-then-comparison
   approach, it's 25-30 times faster. So there's still a need for my current approach, and
   they can be combined.
   if (nr_conflicts(key) >= CONST_N) {
       newname = compress(name);
       for_each_name_in_slot(key): compare(new_name)
   } else {
       for_each_name_in_slot(key): compare(name)
   }

   Above CONST_N can be roughly calculated:
   time_of_compress(name) + N * time_of_compare(new_name) <= N * time_of_compare(name)
3. For the worst-case scenario, there is no obvious difference between ARRAY_SIZE(hash_table)
   0x10000 and 0x1000. So ARRAY_SIZE(hash_table)=0x1000 is enough.
   Statistic information:
   |------------------------------------------------------|
   |   nr_conflicts(key)  |     ARRAY_SIZE(hash_table)    |
   |------------------------------------------------------|
   |         <= ?         |     0x1000    |    0x10000    |
   |------------------------------------------------------|
   |             0        |         0     |      7821     |
   |            20        |        19     |     57375     |
   |            40        |      2419     |       124     |
   |            60        |      1343     |        70     |
   |            80        |       149     |        73     |
   |           100        |        38     |        49     |
   |           200        |       108     |        16     |
   |           400        |        14     |         2     |
   |           600        |         2     |         2     |
   |           800        |         0     |         0     |
   |          1000        |         0     |         0     |
   |        100000        |         4     |         4     |
   |------------------------------------------------------|


Also, I re-calculated:
Using hash will increase the memory size by up to "6 * kallsyms_num_syms + 4 * ARRAY_SIZE(hashtable)"
                                                   |---- What I said earlier was 4
The increased size is close to 1 MB if CONFIG_KALLSYMS_ALL=y.

Hi, Luis:
  For the reasons of the above-mentioned second conclusion. And except for patches 4-6,
even if only the hash method is used, other patches and option "--lto-clang" in patch 6/11
are also needed. If you don't mind, I'd like to use hash at the next stage. The current
patch set is already huge.


>> OK, I found the right hash function. In this way, the tool does not need to consider
>> the byte order.
> 
> https://en.wikipedia.org/wiki/Jenkins_hash_function
> 
> Let's go with jenkins_one_at_a_time_hash(), which looks simpler and doesn't even
> have to think about sizeof(long). It seems to be closest to our current needs.
> 
> uint32_t jenkins_one_at_a_time_hash(const uint8_t* key, size_t length) {
> 	size_t i = 0;
> 	uint32_t hash = 0;
> 
> 	while (i != length) {
> 		hash += key[i++];
> 		hash += hash << 10;
> 		hash ^= hash >> 6;
> 	}
> 	hash += hash << 3;
> 	hash ^= hash >> 11;
> 	hash += hash << 15;
> 
> 	return hash;
> }
> 
>>
>> include/linux/stringhash.h
>>
>> /*
>>  * Version 1: one byte at a time.  Example of use:
>>  *
>>  * unsigned long hash = init_name_hash;
>>  * while (*p)
>>  *      hash = partial_name_hash(tolower(*p++), hash);
>>  * hash = end_name_hash(hash);
>>
>>
>>>
>>>   Luis
>>> .
>>>
>>
> 

-- 
Regards,
  Zhen Lei



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux