On Tue, Sep 24, 2024 at 10:45:48AM +0200, Christoph Hellwig wrote:
> From: Dave Chinner <dchinner@xxxxxxxxxx>
>
> These tests create substantial file fragmentation as a result of
> application actions that defeat post-EOF preallocation
> optimisations. They are intended to replicate known vectors for
> these problems, and provide a check that the fragmentation levels
> have been controlled. The mitigations we make may not completely
> remove fragmentation (e.g. they may demonstrate speculative delalloc
> related extent size growth) so the checks don't assume we'll end up
> with perfect layouts and hence check for an exceptable level of
> fragmentation rather than none.
>
> Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
> [move to different test number, update to current xfstest APIs]
> Signed-off-by: Christoph Hellwig <hch@xxxxxx>
> ---
> tests/xfs/1500 | 66 +++++++++++++++++++++++++++++++++++++++
> tests/xfs/1500.out | 9 ++++++
> tests/xfs/1501 | 68 ++++++++++++++++++++++++++++++++++++++++
> tests/xfs/1501.out | 9 ++++++
> tests/xfs/1502 | 68 ++++++++++++++++++++++++++++++++++++++++
> tests/xfs/1502.out | 9 ++++++
> tests/xfs/1503 | 77 ++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/1503.out | 33 ++++++++++++++++++++
> 8 files changed, 339 insertions(+)
> create mode 100755 tests/xfs/1500
> create mode 100644 tests/xfs/1500.out
> create mode 100755 tests/xfs/1501
> create mode 100644 tests/xfs/1501.out
> create mode 100755 tests/xfs/1502
> create mode 100644 tests/xfs/1502.out
> create mode 100755 tests/xfs/1503
> create mode 100644 tests/xfs/1503.out
>
> diff --git a/tests/xfs/1500 b/tests/xfs/1500
> new file mode 100755
> index 000000000..de0e1df62
> --- /dev/null
> +++ b/tests/xfs/1500
> @@ -0,0 +1,66 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved.
> +#
> +# FS QA Test xfs/500
> +#
> +# Post-EOF preallocation defeat test for O_SYNC buffered I/O.
> +#
> +
> +. ./common/preamble
> +_begin_fstest auto quick prealloc rw
> +
> +. ./common/rc
> +. ./common/filter
> +
> +_require_scratch
> +
> +_cleanup()
> +{
> + # try to kill all background processes
> + wait
> + cd /
> + rm -r -f $tmp.*
> +}
> +
> +_scratch_mkfs > "$seqres.full" 2>&1
> +_scratch_mount
> +
> +# Write multiple files in parallel using synchronous buffered writes. Aim is to
> +# interleave allocations to fragment the files. Synchronous writes defeat the
> +# open/write/close heuristics in xfs_file_release() that prevent EOF block
> +# removal, so this should fragment badly. Typical problematic behaviour shows
> +# per-file extent counts of >900 (almost worse case) whilst fixed behaviour
> +# typically shows extent counts in the low 20s.
Now that these are in for-next, I've noticed that these new tests
consistently fail in the above-documented manner on various configs --
fsdax, always_cow, rtextsize > 1fsb, and sometimes 1k fsblock size.
I'm not sure why this happens, but it probably needs to be looked at
along with all the FALLOC_FL_UNSHARE_RANGE brokenness that's also been
exposed by fstests that /does/ need to be fixed.
--D
> +# Failure is determined by golden output mismatch from _within_tolerance().
> +
> +workfile=$SCRATCH_MNT/file
> +nfiles=8
> +wsize=4096
> +wcnt=1000
> +
> +write_sync_file()
> +{
> + idx=$1
> +
> + for ((cnt=0; cnt<$wcnt; cnt++)); do
> + $XFS_IO_PROG -f -s -c "pwrite $((cnt * wsize)) $wsize" $workfile.$idx
> + done
> +}
> +
> +rm -f $workfile*
> +for ((n=0; n<$nfiles; n++)); do
> + write_sync_file $n > /dev/null 2>&1 &
> +done
> +wait
> +sync
> +
> +for ((n=0; n<$nfiles; n++)); do
> + count=$(_count_extents $workfile.$n)
> + # Acceptible extent count range is 1-40
> + _within_tolerance "file.$n extent count" $count 21 19 -v
> +done
> +
> +status=0
> +exit
> diff --git a/tests/xfs/1500.out b/tests/xfs/1500.out
> new file mode 100644
> index 000000000..414df87ed
> --- /dev/null
> +++ b/tests/xfs/1500.out
> @@ -0,0 +1,9 @@
> +QA output created by 1500
> +file.0 extent count is in range
> +file.1 extent count is in range
> +file.2 extent count is in range
> +file.3 extent count is in range
> +file.4 extent count is in range
> +file.5 extent count is in range
> +file.6 extent count is in range
> +file.7 extent count is in range
> diff --git a/tests/xfs/1501 b/tests/xfs/1501
> new file mode 100755
> index 000000000..cf3cbf8b5
> --- /dev/null
> +++ b/tests/xfs/1501
> @@ -0,0 +1,68 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved.
> +#
> +# FS QA Test xfs/501
> +#
> +# Post-EOF preallocation defeat test for buffered I/O with extent size hints.
> +#
> +
> +. ./common/preamble
> +_begin_fstest auto quick prealloc rw
> +
> +. ./common/rc
> +. ./common/filter
> +
> +_require_scratch
> +
> +_cleanup()
> +{
> + # try to kill all background processes
> + wait
> + cd /
> + rm -r -f $tmp.*
> +}
> +
> +_scratch_mkfs > "$seqres.full" 2>&1
> +_scratch_mount
> +
> +# Write multiple files in parallel using buffered writes with extent size hints.
> +# Aim is to interleave allocations to fragment the files. Writes w/ extent size
> +# hints set defeat the open/write/close heuristics in xfs_file_release() that
> +# prevent EOF block removal, so this should fragment badly. Typical problematic
> +# behaviour shows per-file extent counts of 1000 (worst case!) whilst
> +# fixed behaviour should show very few extents (almost best case).
> +#
> +# Failure is determined by golden output mismatch from _within_tolerance().
> +
> +workfile=$SCRATCH_MNT/file
> +nfiles=8
> +wsize=4096
> +wcnt=1000
> +extent_size=16m
> +
> +write_extsz_file()
> +{
> + idx=$1
> +
> + $XFS_IO_PROG -f -c "extsize $extent_size" $workfile.$idx
> + for ((cnt=0; cnt<$wcnt; cnt++)); do
> + $XFS_IO_PROG -f -c "pwrite $((cnt * wsize)) $wsize" $workfile.$idx
> + done
> +}
> +
> +rm -f $workfile*
> +for ((n=0; n<$nfiles; n++)); do
> + write_extsz_file $n > /dev/null 2>&1 &
> +done
> +wait
> +sync
> +
> +for ((n=0; n<$nfiles; n++)); do
> + count=$(_count_extents $workfile.$n)
> + # Acceptible extent count range is 1-10
> + _within_tolerance "file.$n extent count" $count 2 1 8 -v
> +done
> +
> +status=0
> +exit
> diff --git a/tests/xfs/1501.out b/tests/xfs/1501.out
> new file mode 100644
> index 000000000..a266ef74b
> --- /dev/null
> +++ b/tests/xfs/1501.out
> @@ -0,0 +1,9 @@
> +QA output created by 1501
> +file.0 extent count is in range
> +file.1 extent count is in range
> +file.2 extent count is in range
> +file.3 extent count is in range
> +file.4 extent count is in range
> +file.5 extent count is in range
> +file.6 extent count is in range
> +file.7 extent count is in range
> diff --git a/tests/xfs/1502 b/tests/xfs/1502
> new file mode 100755
> index 000000000..f4228667a
> --- /dev/null
> +++ b/tests/xfs/1502
> @@ -0,0 +1,68 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved.
> +#
> +# FS QA Test xfs/502
> +#
> +# Post-EOF preallocation defeat test for direct I/O with extent size hints.
> +#
> +
> +. ./common/preamble
> +_begin_fstest auto quick prealloc rw
> +
> +. ./common/rc
> +. ./common/filter
> +
> +_require_scratch
> +
> +_cleanup()
> +{
> + # try to kill all background processes
> + wait
> + cd /
> + rm -r -f $tmp.*
> +}
> +
> +_scratch_mkfs > "$seqres.full" 2>&1
> +_scratch_mount
> +
> +# Write multiple files in parallel using O_DIRECT writes w/ extent size hints.
> +# Aim is to interleave allocations to fragment the files. O_DIRECT writes defeat
> +# the open/write/close heuristics in xfs_file_release() that prevent EOF block
> +# removal, so this should fragment badly. Typical problematic behaviour shows
> +# per-file extent counts of ~1000 (worst case) whilst fixed behaviour typically
> +# shows extent counts in the low single digits (almost best case)
> +#
> +# Failure is determined by golden output mismatch from _within_tolerance().
> +
> +workfile=$SCRATCH_MNT/file
> +nfiles=8
> +wsize=4096
> +wcnt=1000
> +extent_size=16m
> +
> +write_direct_file()
> +{
> + idx=$1
> +
> + $XFS_IO_PROG -f -c "extsize $extent_size" $workfile.$idx
> + for ((cnt=0; cnt<$wcnt; cnt++)); do
> + $XFS_IO_PROG -f -d -c "pwrite $((cnt * wsize)) $wsize" $workfile.$idx
> + done
> +}
> +
> +rm -f $workfile*
> +for ((n=0; n<$nfiles; n++)); do
> + write_direct_file $n > /dev/null 2>&1 &
> +done
> +wait
> +sync
> +
> +for ((n=0; n<$nfiles; n++)); do
> + count=$(_count_extents $workfile.$n)
> + # Acceptible extent count range is 1-10
> + _within_tolerance "file.$n extent count" $count 2 1 8 -v
> +done
> +
> +status=0
> +exit
> diff --git a/tests/xfs/1502.out b/tests/xfs/1502.out
> new file mode 100644
> index 000000000..82c8760a3
> --- /dev/null
> +++ b/tests/xfs/1502.out
> @@ -0,0 +1,9 @@
> +QA output created by 1502
> +file.0 extent count is in range
> +file.1 extent count is in range
> +file.2 extent count is in range
> +file.3 extent count is in range
> +file.4 extent count is in range
> +file.5 extent count is in range
> +file.6 extent count is in range
> +file.7 extent count is in range
> diff --git a/tests/xfs/1503 b/tests/xfs/1503
> new file mode 100755
> index 000000000..9002f87e6
> --- /dev/null
> +++ b/tests/xfs/1503
> @@ -0,0 +1,77 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved.
> +#
> +# FS QA Test xfs/503
> +#
> +# Post-EOF preallocation defeat test with O_SYNC buffered I/O that repeatedly
> +# closes and reopens the files.
> +#
> +
> +. ./common/preamble
> +_begin_fstest auto prealloc rw
> +
> +. ./common/rc
> +. ./common/filter
> +
> +_require_scratch
> +
> +_cleanup()
> +{
> + # try to kill all background processes
> + wait
> + cd /
> + rm -r -f $tmp.*
> +}
> +
> +_scratch_mkfs > "$seqres.full" 2>&1
> +_scratch_mount
> +
> +# Write multiple files in parallel using synchronous buffered writes that
> +# repeatedly close and reopen the fails. Aim is to interleave allocations to
> +# fragment the files. Assuming we've fixed the synchronous write defeat, we can
> +# still trigger the same issue with a open/read/close on O_RDONLY files. We
> +# should not be triggering EOF preallocation removal on files we don't have
> +# permission to write, so until this is fixed it should fragment badly. Typical
> +# problematic behaviour shows per-file extent counts of 50-350 whilst fixed
> +# behaviour typically demonstrates post-eof speculative delalloc growth in
> +# extent size (~6 extents for 50MB file).
> +#
> +# Failure is determined by golden output mismatch from _within_tolerance().
> +
> +workfile=$SCRATCH_MNT/file
> +nfiles=32
> +wsize=4096
> +wcnt=1000
> +
> +write_file()
> +{
> + idx=$1
> +
> + $XFS_IO_PROG -f -s -c "pwrite -b 64k 0 50m" $workfile.$idx
> +}
> +
> +read_file()
> +{
> + idx=$1
> +
> + for ((cnt=0; cnt<$wcnt; cnt++)); do
> + $XFS_IO_PROG -f -r -c "pread 0 28" $workfile.$idx
> + done
> +}
> +
> +rm -f $workdir/file*
> +for ((n=0; n<$((nfiles)); n++)); do
> + write_file $n > /dev/null 2>&1 &
> + read_file $n > /dev/null 2>&1 &
> +done
> +wait
> +
> +for ((n=0; n<$nfiles; n++)); do
> + count=$(_count_extents $workfile.$n)
> + # Acceptible extent count range is 1-40
> + _within_tolerance "file.$n extent count" $count 6 5 10 -v
> +done
> +
> +status=0
> +exit
> diff --git a/tests/xfs/1503.out b/tests/xfs/1503.out
> new file mode 100644
> index 000000000..1780b16df
> --- /dev/null
> +++ b/tests/xfs/1503.out
> @@ -0,0 +1,33 @@
> +QA output created by 1503
> +file.0 extent count is in range
> +file.1 extent count is in range
> +file.2 extent count is in range
> +file.3 extent count is in range
> +file.4 extent count is in range
> +file.5 extent count is in range
> +file.6 extent count is in range
> +file.7 extent count is in range
> +file.8 extent count is in range
> +file.9 extent count is in range
> +file.10 extent count is in range
> +file.11 extent count is in range
> +file.12 extent count is in range
> +file.13 extent count is in range
> +file.14 extent count is in range
> +file.15 extent count is in range
> +file.16 extent count is in range
> +file.17 extent count is in range
> +file.18 extent count is in range
> +file.19 extent count is in range
> +file.20 extent count is in range
> +file.21 extent count is in range
> +file.22 extent count is in range
> +file.23 extent count is in range
> +file.24 extent count is in range
> +file.25 extent count is in range
> +file.26 extent count is in range
> +file.27 extent count is in range
> +file.28 extent count is in range
> +file.29 extent count is in range
> +file.30 extent count is in range
> +file.31 extent count is in range
> --
> 2.45.2
>
>
