On Tue, Mar 12, 2024 at 08:31:58PM +0800, Zhang Yi wrote:
> On 2024/3/11 23:37, Darrick J. Wong wrote:
> > On Mon, Mar 11, 2024 at 08:22:53PM +0800, Zhang Yi wrote:
> >> From: Zhang Yi <yi.zhang@xxxxxxxxxx>
> >>
> >> Current clone operation could be non-atomic if the destination of a file
> >> is beyond EOF, user could get a file with corrupted (zeroed) data on
> >> crash.
> >>
> >> The problem is about to pre-alloctions. If you write some data into a
> >> file [A, B) (the position letters are increased one by one), and xfs
> >> could pre-allocate some blocks, then we get a delayed extent [A, D).
> >> Then the writeback path allocate blocks and convert this delayed extent
> >> [A, C) since lack of enough contiguous physical blocks, so the extent
> >> [C, D) is still delayed. After that, both the in-memory and the on-disk
> >> file size are B. If we clone file range into [E, F) from another file,
> >> xfs_reflink_zero_posteof() would call iomap_zero_range() to zero out the
> >> range [B, E) beyond EOF and flush range. Since [C, D) is still a delayed
> >> extent, it will be zeroed and the file's in-memory && on-disk size will
> >> be updated to D after flushing and before doing the clone operation.
> >> This is wrong, because user can user can see the size change and read
> >> zeros in the middle of the clone operation.
> >>
> >> We need to keep the in-memory and on-disk size before the clone
> >> operation starts, so instead of writing zeroes through the page cache
> >> for delayed ranges beyond EOF, we convert these ranges to unwritten and
> >> invalidating any cached data over that range beyond EOF.
> >>
> >> Suggested-by: Dave Chinner <david@xxxxxxxxxxxxx>
> >> Signed-off-by: Zhang Yi <yi.zhang@xxxxxxxxxx>
> >> ---
> >> fs/xfs/xfs_iomap.c | 29 +++++++++++++++++++++++++++++
> >> 1 file changed, 29 insertions(+)
> >>
> >> diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
> >> index ccf83e72d8ca..2b2aace25355 100644
> >> --- a/fs/xfs/xfs_iomap.c
> >> +++ b/fs/xfs/xfs_iomap.c
> >> @@ -957,6 +957,7 @@ xfs_buffered_write_iomap_begin(
> >> struct xfs_mount *mp = ip->i_mount;
> >> xfs_fileoff_t offset_fsb = XFS_B_TO_FSBT(mp, offset);
> >> xfs_fileoff_t end_fsb = xfs_iomap_end_fsb(mp, offset, count);
> >> + xfs_fileoff_t eof_fsb = XFS_B_TO_FSBT(mp, XFS_ISIZE(ip));
> >> struct xfs_bmbt_irec imap, cmap;
> >> struct xfs_iext_cursor icur, ccur;
> >> xfs_fsblock_t prealloc_blocks = 0;
> >> @@ -1035,6 +1036,22 @@ xfs_buffered_write_iomap_begin(
> >> }
> >>
> >> if (imap.br_startoff <= offset_fsb) {
> >> + /*
> >> + * For zeroing out delayed allocation extent, we trim it if
> >> + * it's partial beyonds EOF block, or convert it to unwritten
> >> + * extent if it's all beyonds EOF block.
> >> + */
> >> + if ((flags & IOMAP_ZERO) &&
> >> + isnullstartblock(imap.br_startblock)) {
> >> + if (offset_fsb > eof_fsb)
> >> + goto convert_delay;
> >> + if (end_fsb > eof_fsb) {
> >> + end_fsb = eof_fsb + 1;
> >> + xfs_trim_extent(&imap, offset_fsb,
> >> + end_fsb - offset_fsb);
> >> + }
> >> + }
> >> +
> >> /*
> >> * For reflink files we may need a delalloc reservation when
> >> * overwriting shared extents. This includes zeroing of
> >> @@ -1158,6 +1175,18 @@ xfs_buffered_write_iomap_begin(
> >> xfs_iunlock(ip, lockmode);
> >> return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, 0, seq);
> >>
> >> +convert_delay:
> >> + end_fsb = min(end_fsb, imap.br_startoff + imap.br_blockcount);
> >> + xfs_iunlock(ip, lockmode);
> >> + truncate_pagecache_range(inode, offset, XFS_FSB_TO_B(mp, end_fsb));
> >> + error = xfs_iomap_write_direct(ip, offset_fsb, end_fsb - offset_fsb,
> >> + flags, &imap, &seq);
> >
> > I expected this to be a direct call to xfs_bmapi_convert_delalloc.
> > What was the reason not for using that?
> >
>
> It's because xfs_bmapi_convert_delalloc() isn't guarantee to convert
> enough blocks once a time, it may convert insufficient blocks since lack
> of enough contiguous free physical blocks. If we are going to use it, I
> suppose we need to introduce a new helper something like
> xfs_convert_blocks(), add a loop to do the conversion.
I thought xfs_bmapi_convert_delalloc passes out (via @iomap) the extent
that xfs_bmapi_allocate (or anyone else) allocated (bma.got). If that
mapping is shorter, won't xfs_buffered_write_iomap_begin pass the
shortened mapping out to the iomap machinery? In which case that
iomap_iter loop will call ->iomap_begin on the unfinished delalloc
conversion work?
> xfs_iomap_write_direct() has done all the work of converting, but the
> name of this function is non-obviousness than xfs_bmapi_convert_delalloc(),
> I can change to use it if you think xfs_bmapi_convert_delalloc() is
> better. :)
Yes.
--D
> Thanks,
> Yi.
>
> > --D
> >
> >> + if (error)
> >> + return error;
> >> +
> >> + trace_xfs_iomap_alloc(ip, offset, count, XFS_DATA_FORK, &imap);
> >> + return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, IOMAP_F_NEW, seq);
> >> +
> >> found_cow:
> >> seq = xfs_iomap_inode_sequence(ip, 0);
> >> if (imap.br_startoff <= offset_fsb) {
> >> --
> >> 2.39.2
> >>
> >>
>
>
