Re: fstest failure due to filesystem size for 16k, 32k and 64k FSB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 31, 2024 at 03:05:48PM +0100, Pankaj Raghav (Samsung) wrote:
> > > 
> > > Thanks for the reply. So we can have a small `if` conditional block for xfs
> > > to have fs size = 500M in generic test cases.
> > 
> > I'd suggest creating a helper where you pass in the fs size you want and
> > it rounds that up to the minimum value.  That would then get passed to
> > _scratch_mkfs_sized or _scsi_debug_get_dev.
> > 
> > (testing this as we speak...)
> 
> I would be more than happy if you send a patch for
> this but I also know you are pretty busy, so let me know if you want me
> to send a patch for this issue.
> 
> You had something like this in mind?

Close, but something more like below.  It's not exhaustive; it merely
makes the xfs 64k bs tests pass:

From: Darrick J. Wong <djwong@xxxxxxxxxx>
Subject: [PATCH] misc: fix test that fail formatting with 64k blocksize

There's a bunch of tests that fail the formatting step when the test run
is configured to use XFS with a 64k blocksize.  This happens because XFS
doesn't really support that combination due to minimum log size
constraints.  Fix the test to format larger devices in that case.

Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
---
 common/rc         |   29 +++++++++++++++++++++++++++++
 tests/generic/042 |    9 +--------
 tests/generic/081 |    7 +++++--
 tests/generic/108 |    6 ++++--
 tests/generic/704 |    3 ++-
 tests/generic/730 |    3 ++-
 tests/generic/731 |    3 ++-
 tests/xfs/279     |    7 ++++---
 8 files changed, 49 insertions(+), 18 deletions(-)

diff --git a/common/rc b/common/rc
index 29bb90ca4d..953aad85ae 100644
--- a/common/rc
+++ b/common/rc
@@ -940,6 +940,35 @@ _check_minimal_fs_size()
 	fi
 }
 
+# Round a proposed filesystem size up to the minimium supported size.  The
+# input is in MB and so is the output.
+_small_fs_size_mb()
+{
+	local size="$1"
+	local runner_min_size=0
+	local fs_min_size=0
+
+	case "$FSTYP" in
+	xfs)
+		# xfs no longer supports filesystems smaller than 512m
+		fs_min_size=512
+		;;
+	f2fs)
+		# f2fs-utils 1.9.0 needs at least 38 MB space for f2fs image.
+		# However, f2fs-utils 1.14.0 needs at least 52 MB. Not sure if
+		# it will change again. So just set it 128M.
+		fs_min_size=128
+		;;
+	esac
+	(( size < fs_min_size )) && size="$fs_min_size"
+
+	# If the test runner wanted a minimum size, enforce that here.
+	test -n "$MIN_FSSIZE" && runner_min_size=$((MIN_FSSIZE / 1048576))
+	(( size < runner_min_size)) && size="$runner_min_size"
+
+	echo "$size"
+}
+
 # Create fs of certain size on scratch device
 # _scratch_mkfs_sized <size in bytes> [optional blocksize]
 _scratch_mkfs_sized()
diff --git a/tests/generic/042 b/tests/generic/042
index 5116183f79..63a46d6b2b 100755
--- a/tests/generic/042
+++ b/tests/generic/042
@@ -27,14 +27,7 @@ _crashtest()
 	img=$SCRATCH_MNT/$seq.img
 	mnt=$SCRATCH_MNT/$seq.mnt
 	file=$mnt/file
-	size=25M
-
-	# f2fs-utils 1.9.0 needs at least 38 MB space for f2fs image. However,
-	# f2fs-utils 1.14.0 needs at least 52 MB. Not sure if it will change
-	# again. So just set it 128M.
-	if [ $FSTYP == "f2fs" ]; then
-		size=128M
-	fi
+	size=$(_small_fs_size_mb 25)M
 
 	# Create an fs on a small, initialized image. The pattern is written to
 	# the image to detect stale data exposure.
diff --git a/tests/generic/081 b/tests/generic/081
index 22ac94de53..0996f221d3 100755
--- a/tests/generic/081
+++ b/tests/generic/081
@@ -62,13 +62,16 @@ snapname=snap_$seq
 mnt=$TEST_DIR/mnt_$seq
 mkdir -p $mnt
 
+size=$(_small_fs_size_mb 300)
+lvsize=$((size * 85 / 100))	 # ~256M
+
 # make sure there's enough disk space for 256M lv, test for 300M here in case
 # lvm uses some space for metadata
-_scratch_mkfs_sized $((300 * 1024 * 1024)) >>$seqres.full 2>&1
+_scratch_mkfs_sized $((size * 1024 * 1024)) >>$seqres.full 2>&1
 $LVM_PROG vgcreate -f $vgname $SCRATCH_DEV >>$seqres.full 2>&1
 # We use yes pipe instead of 'lvcreate --yes' because old version of lvm
 # (like 2.02.95 in RHEL6) don't support --yes option
-yes | $LVM_PROG lvcreate -L 256M -n $lvname $vgname >>$seqres.full 2>&1
+yes | $LVM_PROG lvcreate -L ${lvsize}M -n $lvname $vgname >>$seqres.full 2>&1
 # wait for lvcreation to fully complete
 $UDEV_SETTLE_PROG >>$seqres.full 2>&1
 
diff --git a/tests/generic/108 b/tests/generic/108
index efe66ba57f..07703fc8f1 100755
--- a/tests/generic/108
+++ b/tests/generic/108
@@ -44,9 +44,11 @@ vgname=vg_$seq
 
 physical=`blockdev --getpbsz $SCRATCH_DEV`
 logical=`blockdev --getss $SCRATCH_DEV`
+size=$(_small_fs_size_mb 300)
+lvsize=$((size * 91 / 100))
 
 # _get_scsi_debug_dev returns a scsi debug device with 128M in size by default
-SCSI_DEBUG_DEV=`_get_scsi_debug_dev ${physical:-512} ${logical:-512} 0 300`
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev ${physical:-512} ${logical:-512} 0 $size`
 test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device"
 echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full
 
@@ -55,7 +57,7 @@ $LVM_PROG pvcreate -f $SCSI_DEBUG_DEV $SCRATCH_DEV >>$seqres.full 2>&1
 $LVM_PROG vgcreate -f $vgname $SCSI_DEBUG_DEV $SCRATCH_DEV >>$seqres.full 2>&1
 # We use yes pipe instead of 'lvcreate --yes' because old version of lvm
 # (like 2.02.95 in RHEL6) don't support --yes option
-yes | $LVM_PROG lvcreate -i 2 -I 4m -L 275m -n $lvname $vgname \
+yes | $LVM_PROG lvcreate -i 2 -I 4m -L ${lvsize}m -n $lvname $vgname \
 	>>$seqres.full 2>&1
 # wait for lv creation to fully complete
 $UDEV_SETTLE_PROG >>$seqres.full 2>&1
diff --git a/tests/generic/704 b/tests/generic/704
index c0142a6051..6cc4bb4af0 100755
--- a/tests/generic/704
+++ b/tests/generic/704
@@ -30,8 +30,9 @@ _require_scsi_debug
 _require_test
 _require_block_device $TEST_DEV
 
+size=$(_small_fs_size_mb 256)
 echo "Get a device with 4096 physical sector size and 512 logical sector size"
-SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 256`
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 $size`
 blockdev --getpbsz --getss $SCSI_DEBUG_DEV
 
 echo "mkfs and mount"
diff --git a/tests/generic/730 b/tests/generic/730
index 11308cdaa1..988c47e18e 100755
--- a/tests/generic/730
+++ b/tests/generic/730
@@ -27,7 +27,8 @@ _require_test
 _require_block_device $TEST_DEV
 _require_scsi_debug
 
-SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 256`
+size=$(_small_fs_size_mb 256)
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 $size`
 test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device"
 echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full
 
diff --git a/tests/generic/731 b/tests/generic/731
index e1400d062c..b279e3f7b4 100755
--- a/tests/generic/731
+++ b/tests/generic/731
@@ -27,7 +27,8 @@ _require_block_device $TEST_DEV
 _supported_fs generic
 _require_scsi_debug
 
-SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 256`
+size=$(_small_fs_size_mb 256)
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 $size`
 test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device"
 echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full
 
diff --git a/tests/xfs/279 b/tests/xfs/279
index 835d187f51..9f366d1e75 100755
--- a/tests/xfs/279
+++ b/tests/xfs/279
@@ -26,6 +26,7 @@ _cleanup()
 _supported_fs xfs
 
 _require_scsi_debug
+size=$(_small_fs_size_mb 128)
 
 # Remove xfs signature so -f isn't needed to re-mkfs
 _wipe_device()
@@ -55,7 +56,7 @@ _check_mkfs()
 (
 echo "==================="
 echo "4k physical 512b logical aligned"
-SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128`
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 $size`
 test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device"
 # sector size should default to 4k
 _check_mkfs $SCSI_DEBUG_DEV
@@ -68,7 +69,7 @@ _put_scsi_debug_dev
 (
 echo "==================="
 echo "4k physical 512b logical unaligned"
-SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 128`
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 $size`
 test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device"
 # should fail on misalignment
 _check_mkfs $SCSI_DEBUG_DEV
@@ -85,7 +86,7 @@ _put_scsi_debug_dev
 (
 echo "==================="
 echo "hard 4k physical / 4k logical"
-SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 128`
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 $size`
 test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device"
 # block size smaller than sector size should fail 
 _check_mkfs -b size=2048 $SCSI_DEBUG_DEV




[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux