From: Darrick J. Wong <djwong@xxxxxxxxxx>
Test the ability to add older v5 features.
Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
---
tests/xfs/1856 | 247 ++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/1856.out | 2
2 files changed, 249 insertions(+)
create mode 100755 tests/xfs/1856
create mode 100644 tests/xfs/1856.out
diff --git a/tests/xfs/1856 b/tests/xfs/1856
new file mode 100755
index 0000000000..84e72d7c81
--- /dev/null
+++ b/tests/xfs/1856
@@ -0,0 +1,247 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2022-2024 Oracle. All Rights Reserved.
+#
+# FS QA Test No. 1856
+#
+# Test upgrading filesystems with new features.
+#
+. ./common/preamble
+_begin_fstest auto mkfs repair
+
+# Import common functions.
+. ./common/filter
+. ./common/populate
+
+# real QA test starts here
+_supported_fs xfs
+
+_require_check_dmesg
+_require_scratch_nocheck
+_require_scratch_xfs_crc
+
+# Does repair know how to add a particular feature to a filesystem?
+check_repair_upgrade()
+{
+ $XFS_REPAIR_PROG -c "$1=narf" 2>&1 | \
+ grep -q 'unknown option' && return 1
+ return 0
+}
+
+# Are we configured for realtime?
+rt_configured()
+{
+ test "$USE_EXTERNAL" = "yes" && test -n "$SCRATCH_RTDEV"
+}
+
+# Compute the MKFS_OPTIONS string for a particular feature upgrade test
+compute_mkfs_options()
+{
+ local m_opts=""
+ local caller_options="$MKFS_OPTIONS"
+
+ for feat in "${FEATURES[@]}"; do
+ local feat_state="${FEATURE_STATE["${feat}"]}"
+
+ if echo "$caller_options" | grep -E -w -q "${feat}=[0-9]*"; then
+ # Change the caller's options
+ caller_options="$(echo "$caller_options" | \
+ sed -e "s/\([^[:alnum:]]\)${feat}=[0-9]*/\1${feat}=${feat_state}/g")"
+ else
+ # Add it to our list of new mkfs flags
+ m_opts="${feat}=${feat_state},${m_opts}"
+ fi
+ done
+
+ test -n "$m_opts" && m_opts=" -m $m_opts"
+
+ echo "$caller_options$m_opts"
+}
+
+# Log the start of an upgrade.
+upgrade_start_message()
+{
+ local feat="$1"
+
+ echo "Add $feat to filesystem"
+}
+
+# Find dmesg log messages since we started a particular upgrade test
+dmesg_since_feature_upgrade_start()
+{
+ local feat_logmsg="$(upgrade_start_message "$1")"
+
+ # search the dmesg log of last run of $seqnum for possible failures
+ # use sed \cregexpc address type, since $seqnum contains "/"
+ dmesg | \
+ tac | \
+ sed -ne "0,\#run fstests $seqnum at $date_time#p" | \
+ sed -ne "0,\#${feat_logmsg}#p" | \
+ tac
+}
+
+# Did the mount fail because this feature is not supported?
+feature_unsupported()
+{
+ local feat="$1"
+
+ dmesg_since_feature_upgrade_start "$feat" | \
+ grep -q 'has unknown.*features'
+}
+
+# Exercise the scratch fs
+scratch_fsstress()
+{
+ echo moo > $SCRATCH_MNT/sample.txt
+ $FSSTRESS_PROG -n $((TIME_FACTOR * 1000)) -p $((LOAD_FACTOR * 4)) \
+ -d $SCRATCH_MNT/data >> $seqres.full
+}
+
+# Exercise the filesystem a little bit and emit a manifest.
+pre_exercise()
+{
+ local feat="$1"
+
+ _try_scratch_mount &> $tmp.mount
+ res=$?
+ # If the kernel doesn't support the filesystem even after a
+ # fresh format, skip the rest of the upgrade test quietly.
+ if [ $res -eq 32 ] && feature_unsupported "$feat"; then
+ echo "mount failed due to unsupported feature $feat" >> $seqres.full
+ return 1
+ fi
+ if [ $res -ne 0 ]; then
+ cat $tmp.mount
+ echo "mount failed with $res before upgrading to $feat" | \
+ tee -a $seqres.full
+ return 1
+ fi
+
+ scratch_fsstress
+ find $SCRATCH_MNT -type f -print0 | xargs -r -0 md5sum > $tmp.manifest
+ _scratch_unmount
+ return 0
+}
+
+# Check the manifest and exercise the filesystem more
+post_exercise()
+{
+ local feat="$1"
+
+ _try_scratch_mount &> $tmp.mount
+ res=$?
+ # If the kernel doesn't support the filesystem even after a
+ # fresh format, skip the rest of the upgrade test quietly.
+ if [ $res -eq 32 ] && feature_unsupported "$feat"; then
+ echo "mount failed due to unsupported feature $feat" >> $seqres.full
+ return 1
+ fi
+ if [ $res -ne 0 ]; then
+ cat $tmp.mount
+ echo "mount failed with $res after upgrading to $feat" | \
+ tee -a $seqres.full
+ return 1
+ fi
+
+ md5sum --quiet -c $tmp.manifest || \
+ echo "fs contents ^^^ changed after adding $feat"
+
+ iam="check" _check_scratch_fs || \
+ echo "scratch fs check failed after adding $feat"
+
+ # Try to mount the fs in case the check unmounted it
+ _try_scratch_mount &>> $seqres.full
+
+ scratch_fsstress
+
+ iam="check" _check_scratch_fs || \
+ echo "scratch fs check failed after exercising $feat"
+
+ # Try to unmount the fs in case the check didn't
+ _scratch_unmount &>> $seqres.full
+ return 0
+}
+
+# Create a list of fs features in the order that support for them was added
+# to the kernel driver. For each feature upgrade test, we enable all the
+# features that came before it and none of the ones after, which means we're
+# testing incremental migrations. We start each run with a clean fs so that
+# errors and unsatisfied requirements (log size, root ino position, etc) in one
+# upgrade don't spread failure to the rest of the tests.
+FEATURES=()
+if rt_configured; then
+ check_repair_upgrade finobt && FEATURES+=("finobt")
+ check_repair_upgrade inobtcount && FEATURES+=("inobtcount")
+ check_repair_upgrade bigtime && FEATURES+=("bigtime")
+else
+ check_repair_upgrade finobt && FEATURES+=("finobt")
+ check_repair_upgrade rmapbt && FEATURES+=("rmapbt")
+ check_repair_upgrade reflink && FEATURES+=("reflink")
+ check_repair_upgrade inobtcount && FEATURES+=("inobtcount")
+ check_repair_upgrade bigtime && FEATURES+=("bigtime")
+fi
+
+test "${#FEATURES[@]}" -eq 0 && \
+ _notrun "xfs_repair does not know how to add V5 features"
+
+declare -A FEATURE_STATE
+for f in "${FEATURES[@]}"; do
+ FEATURE_STATE["$f"]=0
+done
+
+for feat in "${FEATURES[@]}"; do
+ echo "-----------------------" >> $seqres.full
+
+ upgrade_start_message "$feat" | _tee_kernlog $seqres.full > /dev/null
+
+ opts="$(compute_mkfs_options)"
+ echo "mkfs.xfs $opts" >> $seqres.full
+
+ # Format filesystem
+ MKFS_OPTIONS="$opts" _scratch_mkfs &>> $seqres.full
+ res=$?
+ outcome="mkfs returns $res for $feat upgrade test"
+ echo "$outcome" >> $seqres.full
+ if [ $res -ne 0 ]; then
+ echo "$outcome"
+ continue
+ fi
+
+ # Create some files to make things interesting.
+ pre_exercise "$feat" || break
+
+ # Upgrade the fs
+ _scratch_xfs_repair -c "${feat}=1" &> $tmp.upgrade
+ res=$?
+ cat $tmp.upgrade >> $seqres.full
+ grep -q "^Adding" $tmp.upgrade || \
+ echo "xfs_repair ignored command to add $feat"
+
+ outcome="xfs_repair returns $res while adding $feat"
+ echo "$outcome" >> $seqres.full
+ if [ $res -ne 0 ]; then
+ # Couldn't upgrade filesystem, move on to the next feature.
+ FEATURE_STATE["$feat"]=1
+ continue
+ fi
+
+ # Make sure repair runs cleanly afterwards
+ _scratch_xfs_repair -n &>> $seqres.full
+ res=$?
+ outcome="xfs_repair -n returns $res after adding $feat"
+ echo "$outcome" >> $seqres.full
+ if [ $res -ne 0 ]; then
+ echo "$outcome"
+ fi
+
+ # Make sure we can still exercise the filesystem.
+ post_exercise "$feat" || break
+
+ # Update feature state for next run
+ FEATURE_STATE["$feat"]=1
+done
+
+# success, all done
+echo Silence is golden.
+status=0
+exit
diff --git a/tests/xfs/1856.out b/tests/xfs/1856.out
new file mode 100644
index 0000000000..3c569451b3
--- /dev/null
+++ b/tests/xfs/1856.out
@@ -0,0 +1,2 @@
+QA output created by 1856
+Silence is golden.
