Re: [RFC 0/7] ext4: Allocator changes for atomic write support with DIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 30/11/2023 13:53, Ojaswin Mujoo wrote:

Thanks for putting this together.

This patch series builds on top of John Gary's atomic direct write
patch series [1] and enables this support in ext4. This is a 2 step
process:

1. Enable aligned allocation in ext4 mballoc. This allows us to allocate
power-of-2 aligned physical blocks, which is needed for atomic writes.

2. Hook the direct IO path in ext4 to use aligned allocation to obtain
physical blocks at a given alignment, which is needed for atomic IO. If
for any reason we are not able to obtain blocks at given alignment we
fail the atomic write.

So are we supposed to be doing atomic writes on unwritten ranges only in the file to get the aligned allocations?

I actually tried that, and I got a WARN triggered:

# mkfs.ext4 /dev/sda
mke2fs 1.46.5 (30-Dec-2021)
Creating filesystem with 358400 1k blocks and 89760 inodes
Filesystem UUID: 7543a44b-2957-4ddc-9d4a-db3a5fd019c9
Superblock backups stored on blocks:
        8193, 24577, 40961, 57345, 73729, 204801, 221185

Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done

[   12.745889] mkfs.ext4 (150) used greatest stack depth: 13304 bytes left
# mount /dev/sda mnt
[   12.798804] EXT4-fs (sda): mounted filesystem
7543a44b-2957-4ddc-9d4a-db3a5fd019c9 r/w with ordered data mode. Quota
mode: none.
# touch mnt/file
#
# /test-statx -a /root/mnt/file
statx(/root/mnt/file) = 0
dump_statx results=5fff
  Size: 0               Blocks: 0          IO Block: 1024    regular file
Device: 08:00           Inode: 12          Links: 1
Access: (0644/-rw-r--r--)  Uid:     0   Gid:     0
Access: 2023-12-04 10:27:40.002848720+0000
Modify: 2023-12-04 10:27:40.002848720+0000
Change: 2023-12-04 10:27:40.002848720+0000
 Birth: 2023-12-04 10:27:40.002848720+0000
stx_attributes_mask=0x703874
        STATX_ATTR_WRITE_ATOMIC set
        unit min: 1024
        uunit max: 524288
Attributes: 0000000000400000 (........ ........ ........ ........
........ .?--.... ..---... .---.-..)
#



looks ok so far, then write 4KB at offset 0:

# /test-pwritev2 -a -d -p 0 -l 4096  /root/mnt/file
file=/root/mnt/file write_size=4096 offset=0 o_flags=0x4002 wr_flags=0x24
[   46.813720] ------------[ cut here ]------------
[   46.814934] WARNING: CPU: 1 PID: 158 at fs/ext4/mballoc.c:2991
ext4_mb_regular_allocator+0xeca/0xf20
[   46.816344] Modules linked in:
[   46.816831] CPU: 1 PID: 158 Comm: test-pwritev2 Not tainted
6.7.0-rc1-00038-gae3807f27e7d-dirty #968
[   46.818220] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014
[   46.819886] RIP: 0010:ext4_mb_regular_allocator+0xeca/0xf20
[   46.820734] Code: fd ff ff f0 41 ff 81 e4 03 00 00 e9 63 fd ff ff
90 0f 0b 90 e9 fe f3 ff ff 90 48 c7 c7 e2 7a b2 86 44 89 ca e8 f7 f1
d2 ff 90 <0f> 0b 90 90 45 8b 44 24 3c e9 d4 f3 ff ff 4d 8b 45 08 4c 89
c2 4d
[   46.823577] RSP: 0018:ffffb77dc056b7c0 EFLAGS: 00010286
[ 46.824379] RAX: 0000000000000000 RBX: ffff9b2ad77dea80 RCX: 0000000000000000 [ 46.825458] RDX: 0000000000000001 RSI: ffff9b2b3491b5c0 RDI: ffff9b2b3491b5c0 [ 46.826557] RBP: ffff9b2adc7cd000 R08: 0000000000000000 R09: c0000000ffffdfff [ 46.827634] R10: ffff9b2adcb9d780 R11: ffffb77dc056b648 R12: ffff9b2ac6778000 [ 46.828714] R13: ffff9b2adc7cd000 R14: ffff9b2adc7d0000 R15: 000000000000002a
[   46.829796] FS:  00007f726dece740(0000) GS:ffff9b2b34900000(0000)
knlGS:0000000000000000
[   46.830706] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 46.831299] CR2: 0000000001ed72b8 CR3: 000000001c794006 CR4: 0000000000370ef0 [ 46.832041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 46.832813] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   46.833546] Call Trace:
[   46.833901]  <TASK>
[   46.834163]  ? __warn+0x78/0x130
[   46.834504]  ? ext4_mb_regular_allocator+0xeca/0xf20
[   46.835037]  ? report_bug+0xf8/0x1e0
[   46.835527]  ? console_unlock+0x45/0xd0
[   46.835963]  ? handle_bug+0x40/0x70
[   46.836419]  ? exc_invalid_op+0x13/0x70
[   46.836865]  ? asm_exc_invalid_op+0x16/0x20
[   46.837329]  ? ext4_mb_regular_allocator+0xeca/0xf20
[   46.837852]  ext4_mb_new_blocks+0x7e8/0xe60
[   46.838382]  ? __kmalloc+0x4b/0x130
[   46.838824]  ? __kmalloc+0x4b/0x130
[   46.839243]  ? ext4_find_extent+0x347/0x360
[   46.839743]  ext4_ext_map_blocks+0xc44/0xff0
[   46.840395]  ext4_map_blocks+0x162/0x5b0
[   46.841010]  ? jbd2__journal_start+0x84/0x1f0
[   46.841694]  ext4_map_blocks_aligned+0x20/0xa0
[   46.842382]  ext4_iomap_begin+0x1e9/0x320
[   46.843006]  iomap_iter+0x16d/0x350
[   46.843554]  __iomap_dio_rw+0x3be/0x830
[   46.844150]  iomap_dio_rw+0x9/0x30
[   46.844680]  ext4_file_write_iter+0x597/0x800
[   46.845346]  do_iter_readv_writev+0xe1/0x150
[   46.846029]  do_iter_write+0x86/0x1f0
[   46.846638]  vfs_writev+0x96/0x190
[   46.847176]  ? do_pwritev+0x98/0xd0
[   46.847721]  do_pwritev+0x98/0xd0
[   46.848230]  ? syscall_trace_enter.isra.19+0x130/0x1b0
[   46.849028]  do_syscall_64+0x42/0xf0
[   46.849590]  entry_SYSCALL_64_after_hwframe+0x6f/0x77
[   46.850405] RIP: 0033:0x7f726df9666f
[   46.850964] Code: d5 41 54 49 89 f4 55 89 fd 53 44 89 c3 48 83 ec
18 80 3d bb fd 0b 00 00 74 2a 45 89 c1 49 89 ca 45 31 c0 b8 48 01 00
00 0f 05 <48> 3d 00 f0 ff ff 76 5c 48 8b 15 7a 77 0b 00 f7 d8 64 89 02
48 83
[   46.854020] RSP: 002b:00007fff28b9bff0 EFLAGS: 00000246 ORIG_RAX:
0000000000000148
[ 46.855178] RAX: ffffffffffffffda RBX: 0000000000000024 RCX: 00007f726df9666f [ 46.856248] RDX: 0000000000000001 RSI: 00007fff28b9c050 RDI: 0000000000000003 [ 46.857303] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000024 [ 46.858365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff28b9c050 [ 46.859407] R13: 0000000000000001 R14: 0000000000000000 R15: 00007f726e08aa60
[   46.860448]  </TASK>
[   46.860797] ---[ end trace 0000000000000000 ]---
[   46.861497] EXT4-fs warning (device sda):
ext4_map_blocks_aligned:520: Returned extent couldn't satisfy
alignment requirements
main wrote -1 bytes at offset 0
[ 46.863855] test-pwritev2 (158) used greatest stack depth: 11920 bytes left
#

Please note that I tested on my own dev branch, which contains changes over [1], but I expect it would not make a difference for this test.



Currently this RFC does not impose any restrictions for atomic and non-atomic
allocations to any inode,  which also leaves policy decisions to user-space
as much as possible. So, for example, the user space can:

  * Do an atomic direct IO at any alignment and size provided it
    satisfies underlying device constraints. The only restriction for now
    is that it should be power of 2 len and atleast of FS block size.

  * Do any combination of non atomic and atomic writes on the same file
    in any order. As long as the user space is passing the RWF_ATOMIC flag
    to pwritev2() it is guaranteed to do an atomic IO (or fail if not
    possible).

There are some TODOs on the allocator side which are remaining like...

1.  Fallback to original request size when normalized request size (due to
     preallocation) allocation is not possible.
2.  Testing some edge cases.

But since all the basic test scenarios were covered, hence we wanted to get
this RFC out for discussion on atomic write support for DIO in ext4.

Further points for discussion -

1. We might need an inode flag to identify that the inode has blocks/extents
atomically allocated. So that other userspace tools do not move the blocks of
the inode for e.g. during resize/fsck etc.
   a. Should inode be marked as atomic similar to how we have IS_DAX(inode)
   implementation? Any thoughts?

2. Should there be support for open flags like O_ATOMIC. So that in case if
user wants to do only atomic writes to an open fd, then all writes can be
considered atomic.

3. Do we need to have any feature compat flags for FS? (IMO) It doesn't look
like since say if there are block allocations done which were done atomically,
it should not matter to FS w.r.t compatibility.

4. Mostly aligned allocations are required when we don't have data=journal
mode. So should we return -EIO with data journalling mode for DIO request?

Script to test using pwritev2() can be found here:
https://urldefense.com/v3/__https://gist.github.com/OjaswinM/e67accee3cbb7832bd3f1a9543c01da9__;!!ACWV5N9M2RV99hQ!LbVSb-43597CLDmYnhgOwH6MAcikusRh75-4fUbUrA_8go3B6JL1lWJPmhij8siPJE031qtQb6-bpdLEa1qrVA$

Please note that the posix_memalign() call in the program should PAGE align.

Thanks,
John




[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux