From: Darrick J. Wong <djwong@xxxxxxxxxx> Every now and then, this test fails with the following output when running against my development tree when configured with an 8k fs block size: --- a/tests/generic/251.out 2023-07-11 12:18:21.624971186 -0700 +++ b/tests/generic/251.out.bad 2023-10-15 20:54:44.636000000 -0700 @@ -1,2 +1,4677 @@ QA output created by 251 Running the test: done. +fstrim: /opt: FITRIM ioctl failed: Invalid argument +fstrim: /opt: FITRIM ioctl failed: Invalid argument ... +fstrim: /opt: FITRIM ioctl failed: Invalid argument Dumping the exact fstrim command lines to seqres.full produces this at the end: /usr/sbin/fstrim -m 32544k -o 30247k -l 4k /opt /usr/sbin/fstrim -m 32544k -o 30251k -l 4k /opt ... /usr/sbin/fstrim -m 32544k -o 30255k -l 4k /opt The count of failure messages is the same as the count as the "-l 4k" fstrim invocations. Since this is an 8k-block filesystem, the -l parameter is clearly incorrect. The test computes random -m and -l options. Therefore, create helper functions to guess at the minimum and maximum length and minlen parameters that can be used with the fstrim program. In the inner loop of the test, make sure that our choices for -m and -l fall within those constraints. Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx> --- tests/generic/251 | 59 ++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 51 insertions(+), 8 deletions(-) diff --git a/tests/generic/251 b/tests/generic/251 index 8ee74980cc..40cfd7c381 100755 --- a/tests/generic/251 +++ b/tests/generic/251 @@ -53,14 +53,46 @@ _fail() kill $mypid 2> /dev/null } -_guess_max_minlen() +# Set FSTRIM_{MIN,MAX}_MINLEN to the lower and upper bounds of the -m(inlen) +# parameter to fstrim on the scratch filesystem. +set_minlen_constraints() { - mmlen=100000 - while [ $mmlen -gt 1 ]; do + local mmlen + + for ((mmlen = 100000; mmlen > 0; mmlen /= 2)); do $FSTRIM_PROG -l $(($mmlen*2))k -m ${mmlen}k $SCRATCH_MNT &> /dev/null && break - mmlen=$(($mmlen/2)) done - echo $mmlen + test $mmlen -gt 0 || \ + _notrun "could not determine maximum FSTRIM minlen param" + FSTRIM_MAX_MINLEN=$mmlen + + for ((mmlen = 1; mmlen < FSTRIM_MAX_MINLEN; mmlen *= 2)); do + $FSTRIM_PROG -l $(($mmlen*2))k -m ${mmlen}k $SCRATCH_MNT &> /dev/null && break + done + test $mmlen -le $FSTRIM_MAX_MINLEN || \ + _notrun "could not determine minimum FSTRIM minlen param" + FSTRIM_MIN_MINLEN=$mmlen +} + +# Set FSTRIM_{MIN,MAX}_LEN to the lower and upper bounds of the -l(ength) +# parameter to fstrim on the scratch filesystem. +set_length_constraints() +{ + local mmlen + + for ((mmlen = 100000; mmlen > 0; mmlen /= 2)); do + $FSTRIM_PROG -l ${mmlen}k $SCRATCH_MNT &> /dev/null && break + done + test $mmlen -gt 0 || \ + _notrun "could not determine maximum FSTRIM length param" + FSTRIM_MAX_LEN=$mmlen + + for ((mmlen = 1; mmlen < FSTRIM_MAX_LEN; mmlen *= 2)); do + $FSTRIM_PROG -l ${mmlen}k $SCRATCH_MNT &> /dev/null && break + done + test $mmlen -le $FSTRIM_MAX_LEN || \ + _notrun "could not determine minimum FSTRIM length param" + FSTRIM_MIN_LEN=$mmlen } ## @@ -70,13 +102,24 @@ _guess_max_minlen() ## fstrim_loop() { + set_minlen_constraints + set_length_constraints + echo "MINLEN max=$FSTRIM_MAX_MINLEN min=$FSTRIM_MIN_MINLEN" >> $seqres.full + echo "LENGTH max=$FSTRIM_MAX_LEN min=$FSTRIM_MIN_LEN" >> $seqres.full + trap "_destroy_fstrim; exit \$status" 2 15 fsize=$(_discard_max_offset_kb "$SCRATCH_MNT" "$SCRATCH_DEV") - mmlen=$(_guess_max_minlen) while true ; do - step=$((RANDOM*$RANDOM+4)) - minlen=$(((RANDOM*($RANDOM%2+1))%$mmlen)) + while true; do + step=$((RANDOM*$RANDOM+4)) + test "$step" -ge "$FSTRIM_MIN_LEN" && break + done + while true; do + minlen=$(( (RANDOM * (RANDOM % 2 + 1)) % FSTRIM_MAX_MINLEN )) + test "$minlen" -ge "$FSTRIM_MIN_MINLEN" && break + done + start=$RANDOM if [ $((RANDOM%10)) -gt 7 ]; then $FSTRIM_PROG $SCRATCH_MNT &