From: Carlos Maiolino <cem@xxxxxxxxxx> agsize value accept different suffixes, including filesystem blocks, so, replace "expressed in bytes" by "expressed as a multiple of filesystem blocks". Suggested-by: Dave Chinner <david@xxxxxxxxxxxxx> Signed-off-by: Carlos Maiolino <cmaiolino@xxxxxxxxxx> --- man/man8/mkfs.xfs.8.in | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/man/man8/mkfs.xfs.8.in b/man/man8/mkfs.xfs.8.in index 08bb92f65..96c07fc71 100644 --- a/man/man8/mkfs.xfs.8.in +++ b/man/man8/mkfs.xfs.8.in @@ -352,12 +352,11 @@ This is an alternative to using the .B agcount suboption. The .I value -is the desired size of the allocation group expressed in bytes -(usually using the +is the desired size of the allocation group expressed as a multiple of the +filesystem block size (usually using the .BR m " or " g suffixes). -This value must be a multiple of the filesystem block size, and -must be at least 16MiB, and no more than 1TiB, and may +It must be at least 16MiB, and no more than 1TiB, and may be automatically adjusted to properly align with the stripe geometry. The .B agcount -- 2.39.2
