Re: [PATCH 2/2] check: generate gcov code coverage reports at the end of each section

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 19, 2023 at 07:29:24PM -0700, Darrick J. Wong wrote:
> On Thu, Jul 20, 2023 at 12:19:16AM +0800, Zorro Lang wrote:
> > On Tue, Jul 18, 2023 at 06:11:01PM -0700, Darrick J. Wong wrote:
> > > From: Darrick J. Wong <djwong@xxxxxxxxxx>
> > > 
> > > Support collecting kernel code coverage information as reported in
> > > debugfs.  At the start of each section, we reset the gcov counters;
> > > during the section wrapup, we'll collect the kernel gcov data.
> > > 
> > > If lcov is installed and the kernel source code is available, it will
> > > also generate a nice html report.  If a CLI web browser is available, it
> > > will also format the html report into text for easy grepping.
> > > 
> > > This requires the test runner to set REPORT_GCOV=1 explicitly and gcov
> > > to be enabled in the kernel.
> > > 
> > > Cc: tytso@xxxxxxx
> > > Cc: kent.overstreet@xxxxxxxxx
> > > Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
> > > ---
> > 
> > Hi Darrick,
> > 
> > Is that possible to split this function from check script to tools/ ?
> 
> I don't mind separating it, though I don't see much reason to.  Are you
> concerned about ./check growing larger?

Yeah, a little bit, the check script become smore and more complicated.

> 
> --D
> 
> > Thanks,
> > Zorro
> > 
> > >  README |    3 ++
> > >  check  |   86 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >  2 files changed, 89 insertions(+)
> > > 
> > > 
> > > diff --git a/README b/README
> > > index 9790334db1..ccfdcbe703 100644
> > > --- a/README
> > > +++ b/README
> > > @@ -249,6 +249,9 @@ Kernel/Modules related configuration:
> > >     to "forever" and we'll wait forever until the module is gone.
> > >   - Set KCONFIG_PATH to specify your preferred location of kernel config
> > >     file. The config is used by tests to check if kernel feature is enabled.
> > > + - Set REPORT_GCOV to a directory path to make lcov and genhtml generate
> > > +   html reports from any gcov code coverage data collected by the kernel.
> > > +   If REPORT_GCOV is set to 1, the report will be written to $REPORT_DIR/gcov/.
> > >  
> > >  Test control:
> > >   - Set LOAD_FACTOR to a nonzero positive integer to increase the amount of
> > > diff --git a/check b/check
> > > index 97c7c4c7d1..3e6f27c653 100755
> > > --- a/check
> > > +++ b/check
> > > @@ -451,6 +451,87 @@ _global_log() {
> > >  	fi
> > >  }
> > >  
> > > +GCOV_DIR=/sys/kernel/debug/gcov
> > > +
> > > +# Find the topmost directories of the .gcno directory hierarchy
> > > +_gcov_find_topdirs() {
> > > +	find "${GCOV_DIR}/" -name '*.gcno' -printf '%d|%h\n' | \
> > > +		sort -g -k 1 | \
> > > +		uniq | \
> > > +		$AWK_PROG -F '|' 'BEGIN { x = -1 } { if (x < 0) x = $1; if ($1 == x) printf("%s\n", $2);}'
> > > +}
> > > +
> > > +# Generate lcov html report from kernel gcov data if configured
> > > +_gcov_generate_report() {
> > > +	unset REPORT_GCOV	# don't trigger multiple times if ^C
> > > +
> > > +	local output_dir="$1"
> > > +	test -n "${output_dir}" || return
> > > +	test "$output_dir" = "1" && output_dir="$REPORT_DIR/gcov"
> > > +
> > > +	# Kernel support built in?
> > > +	test -d "$GCOV_DIR" || return
> > > +
> > > +	readarray -t gcno_dirs < <(_gcov_find_topdirs)
> > > +	test "${#gcno_dirs[@]}" -gt 0 || return
> > > +
> > > +	mkdir -p "${output_dir}/"
> > > +
> > > +	# Collect raw coverage data from the kernel
> > > +	readarray -t source_dirs < <(find "${GCOV_DIR}/" -mindepth 1 -maxdepth 1 -type d)
> > > +	for dir in "${source_dirs[@]}"; do
> > > +		cp -p -R -d -u "${dir}" "${output_dir}/"
> > > +	done
> > > +
> > > +	# If lcov is installed, use it to summarize the gcda data.
> > > +	# If it is not installed, there's no point in going forward
> > > +	command -v lcov > /dev/null || return
> > > +	local lcov=(lcov --exclude 'include*' --capture)
> > > +	lcov+=(--output-file "${output_dir}/gcov.report")
> > > +	for d in "${gcno_dirs[@]}"; do
> > > +		lcov+=(--directory "${d}")
> > > +	done
> > > +
> > > +	# Generate a detailed HTML report from the summary
> > > +	local gcov_start_time="$(date --date="${fstests_start_time:-now}")"
> > > +	local genhtml=()
> > > +	if command -v genhtml > /dev/null; then
> > > +		genhtml+=(genhtml -o "${output_dir}/" "${output_dir}/gcov.report")
> > > +		genhtml+=(--title "fstests on $(hostname -s) @ ${gcov_start_time}" --legend)
> > > +	fi
> > > +
> > > +	# Try to convert the HTML report summary as text for easier grepping if
> > > +	# there's an HTML renderer present
> > > +	local totext=()
> > > +	test "${#totext[@]}" -eq 0 && \
> > > +		command -v lynx &>/dev/null && \
> > > +		totext=(lynx -dump "${output_dir}/index.html" -width 120 -nonumbers -nolist)
> > > +	test "${#totext[@]}" -eq 0 && \
> > > +		command -v links &>/dev/null && \
> > > +		totext=(links -dump "${output_dir}/index.html" -width 120)
> > > +	test "${#totext[@]}" -eq 0 && \
> > > +		command -v elinks &>/dev/null && \
> > > +		totext=(elinks -dump "${output_dir}/index.html" --dump-width 120 --no-numbering --no-references)
> > > +
> > > +	# Analyze kernel data
> > > +	"${lcov[@]}" > "${output_dir}/gcov.stdout" 2> "${output_dir}/gcov.stderr"
> > > +	test "${#genhtml[@]}" -ne 0 && \
> > > +		"${genhtml[@]}" >> "${output_dir}/gcov.stdout" 2>> "${output_dir}/gcov.stderr"
> > > +	test "${#totext[@]}" -ne 0 && \
> > > +		"${totext[@]}" > "${output_dir}/index.txt" 2>> "${output_dir}/gcov.stderr"
> > > +}
> > > +
> > > +# Reset gcov usage data
> > > +_gcov_reset() {
> > > +	test -n "${REPORT_GCOV}" || return
> > > +
> > > +	if [ -w "${GCOV_DIR}/reset" ]; then
> > > +		echo 1 > "${GCOV_DIR}/reset"
> > > +	else
> > > +		unset REPORT_GCOV
> > > +	fi
> > > +}
> > > +
> > >  _wrapup()
> > >  {
> > >  	seq="check"
> > > @@ -527,6 +608,10 @@ _wrapup()
> > >  					     "${#bad[*]}" "${#notrun[*]}" \
> > >  					     "$((sect_stop - sect_start))"
> > >  		fi
> > > +
> > > +		# Generate code coverage report
> > > +		test -n "$REPORT_GCOV" && _gcov_generate_report "$REPORT_GCOV"
> > > +
> > >  		needwrap=false
> > >  	fi
> > >  
> > > @@ -801,6 +886,7 @@ function run_section()
> > >  	  echo "MOUNT_OPTIONS -- `_scratch_mount_options`"
> > >  	fi
> > >  	echo
> > > +	_gcov_reset
> > >  	needwrap=true
> > >  
> > >  	if [ ! -z "$SCRATCH_DEV" ]; then
> > > 
> > 
> 




[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux