On Fri, 2022-12-30 at 14:10 -0800, Darrick J. Wong wrote: > From: Darrick J. Wong <djwong@xxxxxxxxxx> > > Begin the fifth chapter of the online fsck design documentation, > where > we discuss the details of the data structures and algorithms used by > the > kernel to examine filesystem metadata and cross-reference it around > the > filesystem. > > Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx> > --- > .../filesystems/xfs-online-fsck-design.rst | 579 > ++++++++++++++++++++ > .../filesystems/xfs-self-describing-metadata.rst | 1 > 2 files changed, 580 insertions(+) > > > diff --git a/Documentation/filesystems/xfs-online-fsck-design.rst > b/Documentation/filesystems/xfs-online-fsck-design.rst > index 42e82971e036..f45bf97fa9c4 100644 > --- a/Documentation/filesystems/xfs-online-fsck-design.rst > +++ b/Documentation/filesystems/xfs-online-fsck-design.rst > @@ -864,3 +864,582 @@ Proposed patchsets include > and > `preservation of sickness info during memory reclaim > < > https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/ > log/?h=indirect-health-reporting>`_. > + > +5. Kernel Algorithms and Data Structures > +======================================== > + > +This section discusses the key algorithms and data structures of the > kernel > +code that provide the ability to check and repair metadata while the > system > +is running. > +The first chapters in this section reveal the pieces that provide > the > +foundation for checking metadata. > +The remainder of this section presents the mechanisms through which > XFS > +regenerates itself. > + > +Self Describing Metadata > +------------------------ > + > +Starting with XFS version 5 in 2012, XFS updated the format of > nearly every > +ondisk block header to record a magic number, a checksum, a > universally > +"unique" identifier (UUID), an owner code, the ondisk address of the > block, > +and a log sequence number. > +When loading a block buffer from disk, the magic number, UUID, > owner, and > +ondisk address confirm that the retrieved block matches the specific > owner of > +the current filesystem, and that the information contained in the > block is > +supposed to be found at the ondisk address. > +The first three components enable checking tools to disregard > alleged metadata > +that doesn't belong to the filesystem, and the fourth component > enables the > +filesystem to detect lost writes. Add... "When ever a file system operation modifies a block, the change is submitted to the journal as a transaction. The journal then processes these transactions marking them done once they are safely committed to the disk" At this point we havnt talked much at all about transactions or logs, and we've just barely begin to cover blocks. I think you at least want a quick blip to describe the relation of these two things, or it may not be clear why we suddenly jumped into logs. > + > +The logging code maintains the checksum and the log sequence number > of the last > +transactional update. > +Checksums are useful for detecting torn writes and other mischief "Checksums (or crc's) are useful for detecting incomplete or torn writes as well as other discrepancies..." > between the > +computer and its storage devices. > +Sequence number tracking enables log recovery to avoid applying out > of date > +log updates to the filesystem. > + > +These two features improve overall runtime resiliency by providing a > means for > +the filesystem to detect obvious corruption when reading metadata > blocks from > +disk, but these buffer verifiers cannot provide any consistency > checking > +between metadata structures. > + > +For more information, please see the documentation for > +Documentation/filesystems/xfs-self-describing-metadata.rst > + > +Reverse Mapping > +--------------- > + > +The original design of XFS (circa 1993) is an improvement upon 1980s > Unix > +filesystem design. > +In those days, storage density was expensive, CPU time was scarce, > and > +excessive seek time could kill performance. > +For performance reasons, filesystem authors were reluctant to add > redundancy to > +the filesystem, even at the cost of data integrity. > +Filesystems designers in the early 21st century choose different > strategies to > +increase internal redundancy -- either storing nearly identical > copies of > +metadata, or more space-efficient techniques such as erasure coding. "such as erasure coding which may encode sections of the data with redundant symbols and in more than one location" That ties it into the next line. If you go on to talk about a term you have not previously defined, i think you want to either define it quickly or just drop it all together. Right now your goal is to just give the reader context, so you want it to move quickly. > +Obvious corruptions are typically repaired by copying replicas or > +reconstructing from codes. > + I think I would have just jumped straight from xfs history to modern xfs... > +For XFS, a different redundancy strategy was chosen to modernize the > design: > +a secondary space usage index that maps allocated disk extents back > to their > +owners. > +By adding a new index, the filesystem retains most of its ability to > scale > +well to heavily threaded workloads involving large datasets, since > the primary > +file metadata (the directory tree, the file block map, and the > allocation > +groups) remain unchanged. > > +Although the reverse-mapping feature increases overhead costs for > space > +mapping activities just like any other system that improves > redundancy, it "Like any system that improves redundancy, the reverse-mapping feature increases overhead costs for space mapping activities. However, it..." > +has two critical advantages: first, the reverse index is key to > enabling online > +fsck and other requested functionality such as filesystem > reorganization, > +better media failure reporting, and shrinking. > +Second, the different ondisk storage format of the reverse mapping > btree > +defeats device-level deduplication, because the filesystem requires > real > +redundancy. > + > +A criticism of adding the secondary index is that it does nothing to > improve > +the robustness of user data storage itself. > +This is a valid point, but adding a new index for file data block > checksums > +increases write amplification and turns data overwrites into copy- > writes, which > +age the filesystem prematurely. > +In keeping with thirty years of precedent, users who want file data > integrity > +can supply as powerful a solution as they require. > +As for metadata, the complexity of adding a new secondary index of > space usage > +is much less than adding volume management and storage device > mirroring to XFS > +itself. > +Perfection of RAID and volume management are best left to existing > layers in > +the kernel. I think I would cull the entire above paragraph. rmap, crc and raid all have very different points of redundancy, so criticism that an apple is not an orange or visavis just feels like a shortsighted comparison that's probably more of a distraction than anything. Sometimes it feels like this document kinda gets off into tangents like it's preemptively trying to position it's self for an argument that hasn't happened yet. But I think it has the effect of pulling the readers attention off topic into an argument they never thought to consider in the first place. The topic of this section is to explain what rmap is. So lets stay on topic and finish laying out that ground work first before getting into how it compares to other solutions > + > +The information captured in a reverse space mapping record is as > follows: > + > +.. code-block:: c > + > + struct xfs_rmap_irec { > + xfs_agblock_t rm_startblock; /* extent start block > */ > + xfs_extlen_t rm_blockcount; /* extent length */ > + uint64_t rm_owner; /* extent owner */ > + uint64_t rm_offset; /* offset within the > owner */ > + unsigned int rm_flags; /* state flags */ > + }; > + > +The first two fields capture the location and size of the physical > space, > +in units of filesystem blocks. > +The owner field tells scrub which metadata structure or file inode > have been > +assigned this space. > +For space allocated to files, the offset field tells scrub where the > space was > +mapped within the file fork. > +Finally, the flags field provides extra information about the space > usage -- > +is this an attribute fork extent? A file mapping btree extent? Or > an > +unwritten data extent? > + > +Online filesystem checking judges the consistency of each primary > metadata > +record by comparing its information against all other space indices. > +The reverse mapping index plays a key role in the consistency > checking process > +because it contains a centralized alternate copy of all space > allocation > +information. > +Program runtime and ease of resource acquisition are the only real > limits to > +what online checking can consult. > +For example, a file data extent mapping can be checked against: > + > +* The absence of an entry in the free space information. > +* The absence of an entry in the inode index. > +* The absence of an entry in the reference count data if the file is > not > + marked as having shared extents. > +* The correspondence of an entry in the reverse mapping information. > + > +A key observation here is that only the reverse mapping can provide > a positive > +affirmation of correctness if the primary metadata is in doubt. if any of the above metadata is in doubt... > +The checking code for most primary metadata follows a path similar > to the > +one outlined above. > + > +A second observation to make about this secondary index is that > proving its > +consistency with the primary metadata is difficult. > +Demonstrating that a given reverse mapping record exactly > corresponds to the > +primary space metadata involves a full scan of all primary space > metadata, > +which is very time intensive. "But why?" Wonders the reader. Just jump into an example: "In order to verify that an rmap extent does not incorrectly over lap with another record, we would need a full scan of all the other records, which is time intensive." ? And then the below is a separate observation right? > +Scanning activity for online fsck can only use non-blocking lock > acquisition > +primitives if the locking order is not the regular order as used by > the rest of > +the filesystem. Lastly, it should be noted that most file system operations tend to lock primary metadata before locking the secondary metadata. This means that scanning operations that acquire the secondary metadata first may need to yield the secondary lock to filesystem operations that have already acquired the primary lock. ? > +This means that forward progress during this part of a scan of the > reverse > +mapping data cannot be guaranteed if system load is especially > heavy. > +Therefore, it is not practical for online check to detect reverse > mapping > +records that lack a counterpart in the primary metadata. Such as <quick list / quick example> > +Instead, scrub relies on rigorous cross-referencing during the > primary space > +mapping structure checks. > + The below paragraph sounds like a re-cap? "So to recap, reverse mappings also...." > +Reverse mappings also play a key role in reconstruction of primary > metadata. > +The secondary information is general enough for online repair to > synthesize a > +complete copy of any primary space management metadata by locking > that > +resource, querying all reverse mapping indices looking for records > matching > +the relevant resource, and transforming the mapping into an > appropriate format. > +The details of how these records are staged, written to disk, and > committed > +into the filesystem are covered in subsequent sections. I also think the section would be ok if you were to trim off this last paragraph too. > + > +Checking and Cross-Referencing > +------------------------------ > + > +The first step of checking a metadata structure is to examine every > record > +contained within the structure and its relationship with the rest of > the > +system. > +XFS contains multiple layers of checking to try to prevent > inconsistent > +metadata from wreaking havoc on the system. > +Each of these layers contributes information that helps the kernel > to make > +three decisions about the health of a metadata structure: > + > +- Is a part of this structure obviously corrupt > (``XFS_SCRUB_OFLAG_CORRUPT``) ? > +- Is this structure inconsistent with the rest of the system > + (``XFS_SCRUB_OFLAG_XCORRUPT``) ? > +- Is there so much damage around the filesystem that cross- > referencing is not > + possible (``XFS_SCRUB_OFLAG_XFAIL``) ? > +- Can the structure be optimized to improve performance or reduce > the size of > + metadata (``XFS_SCRUB_OFLAG_PREEN``) ? > +- Does the structure contain data that is not inconsistent but > deserves review > + by the system administrator (``XFS_SCRUB_OFLAG_WARNING``) ? > + > +The following sections describe how the metadata scrubbing process > works. > + > +Metadata Buffer Verification > +```````````````````````````` > + > +The lowest layer of metadata protection in XFS are the metadata > verifiers built > +into the buffer cache. > +These functions perform inexpensive internal consistency checking of > the block > +itself, and answer these questions: > + > +- Does the block belong to this filesystem? > + > +- Does the block belong to the structure that asked for the read? > + This assumes that metadata blocks only have one owner, which is > always true > + in XFS. > + > +- Is the type of data stored in the block within a reasonable range > of what > + scrub is expecting? > + > +- Does the physical location of the block match the location it was > read from? > + > +- Does the block checksum match the data? > + > +The scope of the protections here are very limited -- verifiers can > only > +establish that the filesystem code is reasonably free of gross > corruption bugs > +and that the storage system is reasonably competent at retrieval. > +Corruption problems observed at runtime cause the generation of > health reports, > +failed system calls, and in the extreme case, filesystem shutdowns > if the > +corrupt metadata force the cancellation of a dirty transaction. > + > +Every online fsck scrubbing function is expected to read every > ondisk metadata > +block of a structure in the course of checking the structure. > +Corruption problems observed during a check are immediately reported > to > +userspace as corruption; during a cross-reference, they are reported > as a > +failure to cross-reference once the full examination is complete. > +Reads satisfied by a buffer already in cache (and hence already > verified) > +bypass these checks. > + > +Internal Consistency Checks > +``````````````````````````` > + > +The next higher level of metadata protection is the internal record "After the buffer cache, the next level of metadata protection is..." > +verification code built into the filesystem. > +These checks are split between the buffer verifiers, the in- > filesystem users of > +the buffer cache, and the scrub code itself, depending on the amount > of higher > +level context required. > +The scope of checking is still internal to the block. > +For performance reasons, regular code may skip some of these checks > unless > +debugging is enabled or a write is about to occur. > +Scrub functions, of course, must check all possible problems. I'd put this chunk after the list below. > +Either way, these higher level checking functions answer these > questions: Then this becomes: "These higher level checking functions..." > + > +- Does the type of data stored in the block match what scrub is > expecting? > + > +- Does the block belong to the owning structure that asked for the > read? > + > +- If the block contains records, do the records fit within the > block? > + > +- If the block tracks internal free space information, is it > consistent with > + the record areas? > + > +- Are the records contained inside the block free of obvious > corruptions? > + > +Record checks in this category are more rigorous and more time- > intensive. > +For example, block pointers and inumbers are checked to ensure that > they point > +within the dynamically allocated parts of an allocation group and > within > +the filesystem. > +Names are checked for invalid characters, and flags are checked for > invalid > +combinations. > +Other record attributes are checked for sensible values. > +Btree records spanning an interval of the btree keyspace are checked > for > +correct order and lack of mergeability (except for file fork > mappings). > + > +Validation of Userspace-Controlled Record Attributes > +```````````````````````````````````````````````````` > + > +Various pieces of filesystem metadata are directly controlled by > userspace. > +Because of this nature, validation work cannot be more precise than > checking > +that a value is within the possible range. > +These fields include: > + > +- Superblock fields controlled by mount options > +- Filesystem labels > +- File timestamps > +- File permissions > +- File size > +- File flags > +- Names present in directory entries, extended attribute keys, and > filesystem > + labels > +- Extended attribute key namespaces > +- Extended attribute values > +- File data block contents > +- Quota limits > +- Quota timer expiration (if resource usage exceeds the soft limit) > + > +Cross-Referencing Space Metadata > +```````````````````````````````` > + > +The next higher level of checking is cross-referencing records > between metadata I kinda like the list first so that the reader has an idea of what these checks are before getting into discussion about them. It just makes it a little more obvious as to why it's "prohibitively expensive" or "dependent on the context of the structure" after having just looked at it The rest looks good from here. Allison > +structures. > +For regular runtime code, the cost of these checks is considered to > be > +prohibitively expensive, but as scrub is dedicated to rooting out > +inconsistencies, it must pursue all avenues of inquiry. > +The exact set of cross-referencing is highly dependent on the > context of the > +data structure being checked. > + > +The XFS btree code has keyspace scanning functions that online fsck > uses to > +cross reference one structure with another. > +Specifically, scrub can scan the key space of an index to determine > if that > +keyspace is fully, sparsely, or not at all mapped to records. > +For the reverse mapping btree, it is possible to mask parts of the > key for the > +purposes of performing a keyspace scan so that scrub can decide if > the rmap > +btree contains records mapping a certain extent of physical space > without the > +sparsenses of the rest of the rmap keyspace getting in the way. > + > +Btree blocks undergo the following checks before cross-referencing: > + > +- Does the type of data stored in the block match what scrub is > expecting? > + > +- Does the block belong to the owning structure that asked for the > read? > + > +- Do the records fit within the block? > + > +- Are the records contained inside the block free of obvious > corruptions? > + > +- Are the name hashes in the correct order? > + > +- Do node pointers within the btree point to valid block addresses > for the type > + of btree? > + > +- Do child pointers point towards the leaves? > + > +- Do sibling pointers point across the same level? > + > +- For each node block record, does the record key accurate reflect > the contents > + of the child block? > + > +Space allocation records are cross-referenced as follows: > + > +1. Any space mentioned by any metadata structure are cross- > referenced as > + follows: > + > + - Does the reverse mapping index list only the appropriate owner > as the > + owner of each block? > + > + - Are none of the blocks claimed as free space? > + > + - If these aren't file data blocks, are none of the blocks > claimed as space > + shared by different owners? > + > +2. Btree blocks are cross-referenced as follows: > + > + - Everything in class 1 above. > + > + - If there's a parent node block, do the keys listed for this > block match the > + keyspace of this block? > + > + - Do the sibling pointers point to valid blocks? Of the same > level? > + > + - Do the child pointers point to valid blocks? Of the next level > down? > + > +3. Free space btree records are cross-referenced as follows: > + > + - Everything in class 1 and 2 above. > + > + - Does the reverse mapping index list no owners of this space? > + > + - Is this space not claimed by the inode index for inodes? > + > + - Is it not mentioned by the reference count index? > + > + - Is there a matching record in the other free space btree? > + > +4. Inode btree records are cross-referenced as follows: > + > + - Everything in class 1 and 2 above. > + > + - Is there a matching record in free inode btree? > + > + - Do cleared bits in the holemask correspond with inode clusters? > + > + - Do set bits in the freemask correspond with inode records with > zero link > + count? > + > +5. Inode records are cross-referenced as follows: > + > + - Everything in class 1. > + > + - Do all the fields that summarize information about the file > forks actually > + match those forks? > + > + - Does each inode with zero link count correspond to a record in > the free > + inode btree? > + > +6. File fork space mapping records are cross-referenced as follows: > + > + - Everything in class 1 and 2 above. > + > + - Is this space not mentioned by the inode btrees? > + > + - If this is a CoW fork mapping, does it correspond to a CoW > entry in the > + reference count btree? > + > +7. Reference count records are cross-referenced as follows: > + > + - Everything in class 1 and 2 above. > + > + - Within the space subkeyspace of the rmap btree (that is to say, > all > + records mapped to a particular space extent and ignoring the > owner info), > + are there the same number of reverse mapping records for each > block as the > + reference count record claims? > + > +Proposed patchsets are the series to find gaps in > +`refcount btree > +< > https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/ > log/?h=scrub-detect-refcount-gaps>`_, > +`inode btree > +< > https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/ > log/?h=scrub-detect-inobt-gaps>`_, and > +`rmap btree > +< > https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/ > log/?h=scrub-detect-rmapbt-gaps>`_ records; > +to find > +`mergeable records > +< > https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/ > log/?h=scrub-detect-mergeable-records>`_; > +and to > +`improve cross referencing with rmap > +< > https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/ > log/?h=scrub-strengthen-rmap-checking>`_ > +before starting a repair. > + > +Checking Extended Attributes > +```````````````````````````` > + > +Extended attributes implement a key-value store that enable > fragments of data > +to be attached to any file. > +Both the kernel and userspace can access the keys and values, > subject to > +namespace and privilege restrictions. > +Most typically these fragments are metadata about the file -- > origins, security > +contexts, user-supplied labels, indexing information, etc. > + > +Names can be as long as 255 bytes and can exist in several different > +namespaces. > +Values can be as large as 64KB. > +A file's extended attributes are stored in blocks mapped by the attr > fork. > +The mappings point to leaf blocks, remote value blocks, or dabtree > blocks. > +Block 0 in the attribute fork is always the top of the structure, > but otherwise > +each of the three types of blocks can be found at any offset in the > attr fork. > +Leaf blocks contain attribute key records that point to the name and > the value. > +Names are always stored elsewhere in the same leaf block. > +Values that are less than 3/4 the size of a filesystem block are > also stored > +elsewhere in the same leaf block. > +Remote value blocks contain values that are too large to fit inside > a leaf. > +If the leaf information exceeds a single filesystem block, a dabtree > (also > +rooted at block 0) is created to map hashes of the attribute names > to leaf > +blocks in the attr fork. > + > +Checking an extended attribute structure is not so straightfoward > due to the > +lack of separation between attr blocks and index blocks. > +Scrub must read each block mapped by the attr fork and ignore the > non-leaf > +blocks: > + > +1. Walk the dabtree in the attr fork (if present) to ensure that > there are no > + irregularities in the blocks or dabtree mappings that do not > point to > + attr leaf blocks. > + > +2. Walk the blocks of the attr fork looking for leaf blocks. > + For each entry inside a leaf: > + > + a. Validate that the name does not contain invalid characters. > + > + b. Read the attr value. > + This performs a named lookup of the attr name to ensure the > correctness > + of the dabtree. > + If the value is stored in a remote block, this also validates > the > + integrity of the remote value block. > + > +Checking and Cross-Referencing Directories > +`````````````````````````````````````````` > + > +The filesystem directory tree is a directed acylic graph structure, > with files > +constituting the nodes, and directory entries (dirents) constituting > the edges. > +Directories are a special type of file containing a set of mappings > from a > +255-byte sequence (name) to an inumber. > +These are called directory entries, or dirents for short. > +Each directory file must have exactly one directory pointing to the > file. > +A root directory points to itself. > +Directory entries point to files of any type. > +Each non-directory file may have multiple directories point to it. > + > +In XFS, directories are implemented as a file containing up to three > 32GB > +partitions. > +The first partition contains directory entry data blocks. > +Each data block contains variable-sized records associating a user- > provided > +name with an inumber and, optionally, a file type. > +If the directory entry data grows beyond one block, the second > partition (which > +exists as post-EOF extents) is populated with a block containing > free space > +information and an index that maps hashes of the dirent names to > directory data > +blocks in the first partition. > +This makes directory name lookups very fast. > +If this second partition grows beyond one block, the third partition > is > +populated with a linear array of free space information for faster > +expansions. > +If the free space has been separated and the second partition grows > again > +beyond one block, then a dabtree is used to map hashes of dirent > names to > +directory data blocks. > + > +Checking a directory is pretty straightfoward: > + > +1. Walk the dabtree in the second partition (if present) to ensure > that there > + are no irregularities in the blocks or dabtree mappings that do > not point to > + dirent blocks. > + > +2. Walk the blocks of the first partition looking for directory > entries. > + Each dirent is checked as follows: > + > + a. Does the name contain no invalid characters? > + > + b. Does the inumber correspond to an actual, allocated inode? > + > + c. Does the child inode have a nonzero link count? > + > + d. If a file type is included in the dirent, does it match the > type of the > + inode? > + > + e. If the child is a subdirectory, does the child's dotdot > pointer point > + back to the parent? > + > + f. If the directory has a second partition, perform a named > lookup of the > + dirent name to ensure the correctness of the dabtree. > + > +3. Walk the free space list in the third partition (if present) to > ensure that > + the free spaces it describes are really unused. > + > +Checking operations involving :ref:`parents <dirparent>` and > +:ref:`file link counts <nlinks>` are discussed in more detail in > later > +sections. > + > +Checking Directory/Attribute Btrees > +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > + > +As stated in previous sections, the directory/attribute btree > (dabtree) index > +maps user-provided names to improve lookup times by avoiding linear > scans. > +Internally, it maps a 32-bit hash of the name to a block offset > within the > +appropriate file fork. > + > +The internal structure of a dabtree closely resembles the btrees > that record > +fixed-size metadata records -- each dabtree block contains a magic > number, a > +checksum, sibling pointers, a UUID, a tree level, and a log sequence > number. > +The format of leaf and node records are the same -- each entry > points to the > +next level down in the hierarchy, with dabtree node records pointing > to dabtree > +leaf blocks, and dabtree leaf records pointing to non-dabtree blocks > elsewhere > +in the fork. > + > +Checking and cross-referencing the dabtree is very similar to what > is done for > +space btrees: > + > +- Does the type of data stored in the block match what scrub is > expecting? > + > +- Does the block belong to the owning structure that asked for the > read? > + > +- Do the records fit within the block? > + > +- Are the records contained inside the block free of obvious > corruptions? > + > +- Are the name hashes in the correct order? > + > +- Do node pointers within the dabtree point to valid fork offsets > for dabtree > + blocks? > + > +- Do leaf pointers within the dabtree point to valid fork offsets > for directory > + or attr leaf blocks? > + > +- Do child pointers point towards the leaves? > + > +- Do sibling pointers point across the same level? > + > +- For each dabtree node record, does the record key accurate reflect > the > + contents of the child dabtree block? > + > +- For each dabtree leaf record, does the record key accurate reflect > the > + contents of the directory or attr block? > + > +Cross-Referencing Summary Counters > +`````````````````````````````````` > + > +XFS maintains three classes of summary counters: available > resources, quota > +resource usage, and file link counts. > + > +In theory, the amount of available resources (data blocks, inodes, > realtime > +extents) can be found by walking the entire filesystem. > +This would make for very slow reporting, so a transactional > filesystem can > +maintain summaries of this information in the superblock. > +Cross-referencing these values against the filesystem metadata > should be a > +simple matter of walking the free space and inode metadata in each > AG and the > +realtime bitmap, but there are complications that will be discussed > in > +:ref:`more detail <fscounters>` later. > + > +:ref:`Quota usage <quotacheck>` and :ref:`file link count <nlinks>` > +checking are sufficiently complicated to warrant separate sections. > + > +Post-Repair Reverification > +`````````````````````````` > + > +After performing a repair, the checking code is run a second time to > validate > +the new structure, and the results of the health assessment are > recorded > +internally and returned to the calling process. > +This step is critical for enabling system administrator to monitor > the status > +of the filesystem and the progress of any repairs. > +For developers, it is a useful means to judge the efficacy of error > detection > +and correction in the online and offline checking tools. > diff --git a/Documentation/filesystems/xfs-self-describing- > metadata.rst b/Documentation/filesystems/xfs-self-describing- > metadata.rst > index b79dbf36dc94..a10c4ae6955e 100644 > --- a/Documentation/filesystems/xfs-self-describing-metadata.rst > +++ b/Documentation/filesystems/xfs-self-describing-metadata.rst > @@ -1,4 +1,5 @@ > .. SPDX-License-Identifier: GPL-2.0 > +.. _xfs_self_describing_metadata: > > ============================ > XFS Self Describing Metadata >
