[PATCH 1/1] xfs: test xfs_scrub phase 6 media error reporting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Darrick J. Wong <djwong@xxxxxxxxxx>

Add new helpers to dmerror to provide for marking selected ranges
totally bad -- both reads and writes will fail.  Create a new test for
xfs_scrub to check that it reports media errors in data files correctly.

Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
---
 common/dmerror    |  136 +++++++++++++++++++++++++++++++++++++++++++++--
 common/xfs        |    9 +++
 tests/xfs/747     |  155 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/747.out |   12 ++++
 4 files changed, 309 insertions(+), 3 deletions(-)
 create mode 100755 tests/xfs/747
 create mode 100644 tests/xfs/747.out


diff --git a/common/dmerror b/common/dmerror
index 54122b12ea..58ab461e0e 100644
--- a/common/dmerror
+++ b/common/dmerror
@@ -159,16 +159,16 @@ _dmerror_load_error_table()
 	fi
 
 	# Load new table
-	$DMSETUP_PROG load error-test --table "$DMERROR_TABLE"
+	echo "$DMERROR_TABLE" | $DMSETUP_PROG load error-test
 	load_res=$?
 
 	if [ -n "$NON_ERROR_RTDEV" ]; then
-		$DMSETUP_PROG load error-rttest --table "$DMERROR_RTTABLE"
+		echo "$DMERROR_RTTABLE" | $DMSETUP_PROG load error-rttest
 		[ $? -ne 0 ] && _fail "failed to load error table into error-rttest"
 	fi
 
 	if [ -n "$NON_ERROR_LOGDEV" ]; then
-		$DMSETUP_PROG load error-logtest --table "$DMERROR_LOGTABLE"
+		echo "$DMERROR_LOGTABLE" | $DMSETUP_PROG load error-logtest
 		[ $? -ne 0 ] && _fail "failed to load error table into error-logtest"
 	fi
 
@@ -250,3 +250,133 @@ _dmerror_load_working_table()
 	[ $load_res -ne 0 ] && _fail "dmsetup failed to load error table"
 	[ $resume_res -ne 0 ] && _fail  "dmsetup resume failed"
 }
+
+# Given a list of (start, length) tuples on stdin, combine adjacent tuples into
+# larger ones and write the new list to stdout.
+__dmerror_combine_extents()
+{
+	awk 'BEGIN{start = 0; len = 0;}{
+if (start + len == $1) {
+	len += $2;
+} else {
+	if (len > 0)
+		printf("%d %d\n", start, len);
+	start = $1;
+	len = $2;
+}
+} END {
+	if (len > 0)
+		printf("%d %d\n", start, len);
+}'
+}
+
+# Given a block device, the name of a preferred dm target, the name of an
+# implied dm target, and a list of (start, len) tuples on stdin, create a new
+# dm table which maps each of the tuples to the preferred target and all other
+# areas to the implied dm target.
+__dmerror_recreate_map()
+{
+	local device="$1"
+	local preferred_tgt="$2"
+	local implied_tgt="$3"
+	local size=$(blockdev --getsz "$device")
+
+	awk -v device="$device" -v size=$size -v implied_tgt="$implied_tgt" \
+		-v preferred_tgt="$preferred_tgt" 'BEGIN{implied_start = 0;}{
+	extent_start = $1;
+	extent_len = $2;
+
+	if (extent_start > size) {
+		extent_start = size;
+		extent_len = 0;
+	} else if (extent_start + extent_len > size) {
+		extent_len = size - extent_start;
+	}
+
+	if (implied_start < extent_start)
+		printf("%d %d %s %s %d\n", implied_start,
+				extent_start - implied_start, implied_tgt,
+				device, implied_start);
+	printf("%d %d %s %s %d\n", extent_start, extent_len, preferred_tgt,
+			device, extent_start);
+	implied_start = extent_start + extent_len;
+}END{
+	if (implied_start < size)
+		printf("%d %d %s %s %d\n", implied_start, size - implied_start,
+				implied_tgt, device, implied_start);
+}'
+}
+
+# Update the dm error table so that the range (start, len) maps to the
+# preferred dm target, overriding anything that maps to the implied dm target.
+# This assumes that the only desired targets for this dm device are the
+# preferred and and implied targets.  The fifth argument is the scratch device
+# that we want to change the table for.
+__dmerror_change()
+{
+	local start="$1"
+	local len="$2"
+	local preferred_tgt="$3"
+	local implied_tgt="$4"
+	local whichdev="$5"
+
+	case "$whichdev" in
+	"SCRATCH_DEV"|"")	whichdev="$SCRATCH_DEV";;
+	"SCRATCH_LOGDEV"|"LOG")	whichdev="$NON_ERROR_LOGDEV";;
+	"SCRATCH_RTDEV"|"RT")	whichdev="$NON_ERROR_RTDEV";;
+	esac
+
+	case "$whichdev" in
+	"$SCRATCH_DEV")		old_table="$DMERROR_TABLE";;
+	"$NON_ERROR_LOGDEV")	old_table="$DMERROR_LOGTABLE";;
+	"$NON_ERROR_RTDEV")	old_table="$DMERROR_RTTABLE";;
+	*)
+		echo "$whichdev: Unknown dmerror device."
+		return
+		;;
+	esac
+
+	new_table="$( (echo "$old_table"; echo "$start $len $preferred_tgt") | \
+		awk -v type="$preferred_tgt" '{if ($3 == type) print $0;}' | \
+		sort -g | \
+		__dmerror_combine_extents | \
+		__dmerror_recreate_map "$whichdev" "$preferred_tgt" \
+				"$implied_tgt" )"
+
+	case "$whichdev" in
+	"$SCRATCH_DEV")		DMERROR_TABLE="$new_table";;
+	"$NON_ERROR_LOGDEV")	DMERROR_LOGTABLE="$new_table";;
+	"$NON_ERROR_RTDEV")	DMERROR_RTTABLE="$new_table";;
+	esac
+}
+
+# Reset the dm error table to everything ok.  The dm device itself must be
+# remapped by calling _dmerror_load_error_table.
+_dmerror_reset_table()
+{
+	DMERROR_TABLE="$DMLINEAR_TABLE"
+	DMERROR_LOGTABLE="$DMLINEAR_LOGTABLE"
+	DMERROR_RTTABLE="$DMLINEAR_RTTABLE"
+}
+
+# Update the dm error table so that IOs to the given range will return EIO.
+# The dm device itself must be remapped by calling _dmerror_load_error_table.
+_dmerror_mark_range_bad()
+{
+	local start="$1"
+	local len="$2"
+	local dev="$3"
+
+	__dmerror_change "$start" "$len" error linear "$dev"
+}
+
+# Update the dm error table so that IOs to the given range will succeed.
+# The dm device itself must be remapped by calling _dmerror_load_error_table.
+_dmerror_mark_range_good()
+{
+	local start="$1"
+	local len="$2"
+	local dev="$3"
+
+	__dmerror_change "$start" "$len" linear error "$dev"
+}
diff --git a/common/xfs b/common/xfs
index e1c15d3d04..2cd8254937 100644
--- a/common/xfs
+++ b/common/xfs
@@ -194,6 +194,15 @@ _xfs_get_file_block_size()
 	$XFS_INFO_PROG "$path" | grep realtime | sed -e 's/^.*extsz=\([0-9]*\).*$/\1/g'
 }
 
+# Decide if this path is a file on the realtime device
+_xfs_is_realtime_file()
+{
+	if [ "$USE_EXTERNAL" != "yes" ] || [ -z "$SCRATCH_RTDEV" ]; then
+		return 1
+	fi
+	$XFS_IO_PROG -c 'stat -v' "$1" | grep -q -w realtime
+}
+
 # Set or clear the realtime status of every supplied path.  The first argument
 # is either 'data' or 'realtime'.  All other arguments should be paths to
 # existing directories or empty regular files.
diff --git a/tests/xfs/747 b/tests/xfs/747
new file mode 100755
index 0000000000..8952c24ee6
--- /dev/null
+++ b/tests/xfs/747
@@ -0,0 +1,155 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2022 Oracle.  All Rights Reserved.
+#
+# FS QA Test No. 747
+#
+# Check xfs_scrub's media scan can actually return diagnostic information for
+# media errors in file data extents.
+
+. ./common/preamble
+_begin_fstest auto quick scrub
+
+# Override the default cleanup function.
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+	_dmerror_cleanup
+}
+
+# Import common functions.
+. ./common/fuzzy
+. ./common/filter
+. ./common/dmerror
+
+# real QA test starts here
+_supported_fs xfs
+_require_dm_target error
+_require_scratch
+_require_scratch_xfs_crc
+_require_scrub
+
+filter_scrub_errors() {
+	_filter_scratch | sed \
+		-e "s/offset $((fs_blksz * 2)) /offset 2FSB /g" \
+		-e "s/length $fs_blksz.*/length 1FSB./g"
+}
+
+_scratch_mkfs >> $seqres.full
+_dmerror_init
+_dmerror_mount >> $seqres.full 2>&1
+
+_supports_xfs_scrub $SCRATCH_MNT $SCRATCH_DEV || _notrun "Scrub not supported"
+
+# Write a file with 4 file blocks worth of data
+victim=$SCRATCH_MNT/a
+file_blksz=$(_get_file_block_size $SCRATCH_MNT)
+$XFS_IO_PROG -f -c "pwrite -S 0x58 0 $((4 * file_blksz))" -c "fsync" $victim >> $seqres.full
+unset errordev
+_xfs_is_realtime_file $victim && errordev="RT"
+bmap_str="$($XFS_IO_PROG -c "bmap -elpv" $victim | grep "^[[:space:]]*0:")"
+echo "$errordev:$bmap_str" >> $seqres.full
+
+phys="$(echo "$bmap_str" | $AWK_PROG '{print $3}')"
+if [ "$errordev" = "RT" ]; then
+	len="$(echo "$bmap_str" | $AWK_PROG '{print $4}')"
+else
+	len="$(echo "$bmap_str" | $AWK_PROG '{print $6}')"
+fi
+fs_blksz=$(_get_block_size $SCRATCH_MNT)
+echo "file_blksz:$file_blksz:fs_blksz:$fs_blksz" >> $seqres.full
+kernel_sectors_per_fs_block=$((fs_blksz / 512))
+
+# Did we get at least 4 fs blocks worth of extent?
+min_len_sectors=$(( 4 * kernel_sectors_per_fs_block ))
+test "$len" -lt $min_len_sectors && \
+	_fail "could not format a long enough extent on an empty fs??"
+
+phys_start=$(echo "$phys" | sed -e 's/\.\..*//g')
+
+echo "$errordev:$phys:$len:$fs_blksz:$phys_start" >> $seqres.full
+echo "victim file:" >> $seqres.full
+od -tx1 -Ad -c $victim >> $seqres.full
+
+# Set the dmerror table so that all IO will pass through.
+_dmerror_reset_table
+
+cat >> $seqres.full << ENDL
+dmerror before:
+$DMERROR_TABLE
+$DMERROR_RTTABLE
+<end table>
+ENDL
+
+# All sector numbers that we feed to the kernel must be in units of 512b, but
+# they also must be aligned to the device's logical block size.
+logical_block_size=$(_min_dio_alignment $SCRATCH_DEV)
+kernel_sectors_per_device_lba=$((logical_block_size / 512))
+
+# Mark as bad one of the device LBAs in the middle of the extent.  Target the
+# second LBA of the third block of the four-block file extent that we allocated
+# earlier, but without overflowing into the fourth file block.
+bad_sector=$(( phys_start + (2 * kernel_sectors_per_fs_block) ))
+bad_len=$kernel_sectors_per_device_lba
+if (( kernel_sectors_per_device_lba < kernel_sectors_per_fs_block )); then
+	bad_sector=$((bad_sector + kernel_sectors_per_device_lba))
+fi
+if (( (bad_sector % kernel_sectors_per_device_lba) != 0)); then
+	echo "bad_sector $bad_sector not congruent with device logical block size $logical_block_size"
+fi
+_dmerror_mark_range_bad $bad_sector $bad_len $errordev
+
+cat >> $seqres.full << ENDL
+dmerror after marking bad:
+$DMERROR_TABLE
+$DMERROR_RTTABLE
+<end table>
+ENDL
+
+_dmerror_load_error_table
+
+# See if the media scan picks it up.
+echo "Scrub for injected media error (single threaded)"
+
+# Once in single-threaded mode
+_scratch_scrub -b -x >> $seqres.full 2> $tmp.error
+cat $tmp.error | filter_scrub_errors
+
+# Once in parallel mode
+echo "Scrub for injected media error (multi threaded)"
+_scratch_scrub -x >> $seqres.full 2> $tmp.error
+cat $tmp.error | filter_scrub_errors
+
+# Remount to flush the page cache and reread to see the IO error
+_dmerror_unmount
+_dmerror_mount
+echo "victim file:" >> $seqres.full
+od -tx1 -Ad -c $victim >> $seqres.full 2> $tmp.error
+cat $tmp.error | _filter_scratch
+
+# Scrub again to re-confirm the media error across a remount
+echo "Scrub for injected media error (after remount)"
+_scratch_scrub -x >> $seqres.full 2> $tmp.error
+cat $tmp.error | filter_scrub_errors
+
+# Now mark the bad range good so that a retest shows no media failure.
+_dmerror_mark_range_good $bad_sector $bad_len $errordev
+_dmerror_load_error_table
+
+cat >> $seqres.full << ENDL
+dmerror after marking good:
+$DMERROR_TABLE
+$DMERROR_RTTABLE
+<end table>
+ENDL
+
+echo "Scrub after removing injected media error"
+
+# Scrub one last time to make sure the error's gone.
+_scratch_scrub -x >> $seqres.full 2> $tmp.error
+cat $tmp.error | filter_scrub_errors
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/747.out b/tests/xfs/747.out
new file mode 100644
index 0000000000..f85f1753a6
--- /dev/null
+++ b/tests/xfs/747.out
@@ -0,0 +1,12 @@
+QA output created by 747
+Scrub for injected media error (single threaded)
+Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB.
+SCRATCH_MNT: unfixable errors found: 1
+Scrub for injected media error (multi threaded)
+Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB.
+SCRATCH_MNT: unfixable errors found: 1
+od: SCRATCH_MNT/a: read error: Input/output error
+Scrub for injected media error (after remount)
+Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB.
+SCRATCH_MNT: unfixable errors found: 1
+Scrub after removing injected media error




[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux