From: Dave Chinner <dchinner@xxxxxxxxxx>
[ Upstream commit 919edbadebe17a67193533f531c2920c03e40fa4 ]
Jan Kara reported a performance regression in dbench that he
bisected down to commit bad77c375e8d ("xfs: CIL checkpoint
flushes caches unconditionally").
Whilst developing the journal flush/fua optimisations this cache was
part of, it appeared to made a significant difference to
performance. However, now that this patchset has settled and all the
correctness issues fixed, there does not appear to be any
significant performance benefit to asynchronous cache flushes.
In fact, the opposite is true on some storage types and workloads,
where additional cache flushes that can occur from fsync heavy
workloads have measurable and significant impact on overall
throughput.
Local dbench testing shows little difference on dbench runs with
sync vs async cache flushes on either fast or slow SSD storage, and
no difference in streaming concurrent async transaction workloads
like fs-mark.
Fast NVME storage.
>From `dbench -t 30`, CIL scale:
clients async sync
BW Latency BW Latency
1 935.18 0.855 915.64 0.903
8 2404.51 6.873 2341.77 6.511
16 3003.42 6.460 2931.57 6.529
32 3697.23 7.939 3596.28 7.894
128 7237.43 15.495 7217.74 11.588
512 5079.24 90.587 5167.08 95.822
fsmark, 32 threads, create w/ 64 byte xattr w/32k logbsize
create chown unlink
async 1m41s 1m16s 2m03s
sync 1m40s 1m19s 1m54s
Slower SATA SSD storage:
>From `dbench -t 30`, CIL scale:
clients async sync
BW Latency BW Latency
1 78.59 15.792 83.78 10.729
8 367.88 92.067 404.63 59.943
16 564.51 72.524 602.71 76.089
32 831.66 105.984 870.26 110.482
128 1659.76 102.969 1624.73 91.356
512 2135.91 223.054 2603.07 161.160
fsmark, 16 threads, create w/32k logbsize
create unlink
async 5m06s 4m15s
sync 5m00s 4m22s
And on Jan's test machine:
5.18-rc8-vanilla 5.18-rc8-patched
Amean 1 71.22 ( 0.00%) 64.94 * 8.81%*
Amean 2 93.03 ( 0.00%) 84.80 * 8.85%*
Amean 4 150.54 ( 0.00%) 137.51 * 8.66%*
Amean 8 252.53 ( 0.00%) 242.24 * 4.08%*
Amean 16 454.13 ( 0.00%) 439.08 * 3.31%*
Amean 32 835.24 ( 0.00%) 829.74 * 0.66%*
Amean 64 1740.59 ( 0.00%) 1686.73 * 3.09%*
Performance and cache flush behaviour is restored to pre-regression
levels.
As such, we can now consider the async cache flush mechanism an
unnecessary exercise in premature optimisation and hence we can
now remove it and the infrastructure it requires completely.
Fixes: bad77c375e8d ("xfs: CIL checkpoint flushes caches unconditionally")
Reported-and-tested-by: Jan Kara <jack@xxxxxxx>
Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
Reviewed-by: Darrick J. Wong <djwong@xxxxxxxxxx>
Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
Signed-off-by: Leah Rumancik <lrumancik@xxxxxxxxxx>
---
fs/xfs/xfs_bio_io.c | 35 -----------------------------------
fs/xfs/xfs_linux.h | 2 --
fs/xfs/xfs_log.c | 36 +++++++++++-------------------------
fs/xfs/xfs_log_cil.c | 42 +++++++++++++-----------------------------
fs/xfs/xfs_log_priv.h | 3 +--
5 files changed, 25 insertions(+), 93 deletions(-)
diff --git a/fs/xfs/xfs_bio_io.c b/fs/xfs/xfs_bio_io.c
index 667e297f59b1..17f36db2f792 100644
--- a/fs/xfs/xfs_bio_io.c
+++ b/fs/xfs/xfs_bio_io.c
@@ -9,41 +9,6 @@ static inline unsigned int bio_max_vecs(unsigned int count)
return bio_max_segs(howmany(count, PAGE_SIZE));
}
-static void
-xfs_flush_bdev_async_endio(
- struct bio *bio)
-{
- complete(bio->bi_private);
-}
-
-/*
- * Submit a request for an async cache flush to run. If the request queue does
- * not require flush operations, just skip it altogether. If the caller needs
- * to wait for the flush completion at a later point in time, they must supply a
- * valid completion. This will be signalled when the flush completes. The
- * caller never sees the bio that is issued here.
- */
-void
-xfs_flush_bdev_async(
- struct bio *bio,
- struct block_device *bdev,
- struct completion *done)
-{
- struct request_queue *q = bdev->bd_disk->queue;
-
- if (!test_bit(QUEUE_FLAG_WC, &q->queue_flags)) {
- complete(done);
- return;
- }
-
- bio_init(bio, NULL, 0);
- bio_set_dev(bio, bdev);
- bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC;
- bio->bi_private = done;
- bio->bi_end_io = xfs_flush_bdev_async_endio;
-
- submit_bio(bio);
-}
int
xfs_rw_bdev(
struct block_device *bdev,
diff --git a/fs/xfs/xfs_linux.h b/fs/xfs/xfs_linux.h
index c174262a074e..7688663b9773 100644
--- a/fs/xfs/xfs_linux.h
+++ b/fs/xfs/xfs_linux.h
@@ -196,8 +196,6 @@ static inline uint64_t howmany_64(uint64_t x, uint32_t y)
int xfs_rw_bdev(struct block_device *bdev, sector_t sector, unsigned int count,
char *data, unsigned int op);
-void xfs_flush_bdev_async(struct bio *bio, struct block_device *bdev,
- struct completion *done);
#define ASSERT_ALWAYS(expr) \
(likely(expr) ? (void)0 : assfail(NULL, #expr, __FILE__, __LINE__))
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 9ac4fc177d93..0fb7d05ca308 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -527,12 +527,6 @@ xlog_state_shutdown_callbacks(
* Flush iclog to disk if this is the last reference to the given iclog and the
* it is in the WANT_SYNC state.
*
- * If the caller passes in a non-zero @old_tail_lsn and the current log tail
- * does not match, there may be metadata on disk that must be persisted before
- * this iclog is written. To satisfy that requirement, set the
- * XLOG_ICL_NEED_FLUSH flag as a condition for writing this iclog with the new
- * log tail value.
- *
* If XLOG_ICL_NEED_FUA is already set on the iclog, we need to ensure that the
* log tail is updated correctly. NEED_FUA indicates that the iclog will be
* written to stable storage, and implies that a commit record is contained
@@ -549,12 +543,10 @@ xlog_state_shutdown_callbacks(
* always capture the tail lsn on the iclog on the first NEED_FUA release
* regardless of the number of active reference counts on this iclog.
*/
-
int
xlog_state_release_iclog(
struct xlog *log,
- struct xlog_in_core *iclog,
- xfs_lsn_t old_tail_lsn)
+ struct xlog_in_core *iclog)
{
xfs_lsn_t tail_lsn;
bool last_ref;
@@ -565,18 +557,14 @@ xlog_state_release_iclog(
/*
* Grabbing the current log tail needs to be atomic w.r.t. the writing
* of the tail LSN into the iclog so we guarantee that the log tail does
- * not move between deciding if a cache flush is required and writing
- * the LSN into the iclog below.
+ * not move between the first time we know that the iclog needs to be
+ * made stable and when we eventually submit it.
*/
- if (old_tail_lsn || iclog->ic_state == XLOG_STATE_WANT_SYNC) {
+ if ((iclog->ic_state == XLOG_STATE_WANT_SYNC ||
+ (iclog->ic_flags & XLOG_ICL_NEED_FUA)) &&
+ !iclog->ic_header.h_tail_lsn) {
tail_lsn = xlog_assign_tail_lsn(log->l_mp);
-
- if (old_tail_lsn && tail_lsn != old_tail_lsn)
- iclog->ic_flags |= XLOG_ICL_NEED_FLUSH;
-
- if ((iclog->ic_flags & XLOG_ICL_NEED_FUA) &&
- !iclog->ic_header.h_tail_lsn)
- iclog->ic_header.h_tail_lsn = cpu_to_be64(tail_lsn);
+ iclog->ic_header.h_tail_lsn = cpu_to_be64(tail_lsn);
}
last_ref = atomic_dec_and_test(&iclog->ic_refcnt);
@@ -601,8 +589,6 @@ xlog_state_release_iclog(
}
iclog->ic_state = XLOG_STATE_SYNCING;
- if (!iclog->ic_header.h_tail_lsn)
- iclog->ic_header.h_tail_lsn = cpu_to_be64(tail_lsn);
xlog_verify_tail_lsn(log, iclog);
trace_xlog_iclog_syncing(iclog, _RET_IP_);
@@ -875,7 +861,7 @@ xlog_force_iclog(
iclog->ic_flags |= XLOG_ICL_NEED_FLUSH | XLOG_ICL_NEED_FUA;
if (iclog->ic_state == XLOG_STATE_ACTIVE)
xlog_state_switch_iclogs(iclog->ic_log, iclog, 0);
- return xlog_state_release_iclog(iclog->ic_log, iclog, 0);
+ return xlog_state_release_iclog(iclog->ic_log, iclog);
}
/*
@@ -2413,7 +2399,7 @@ xlog_write_copy_finish(
ASSERT(iclog->ic_state == XLOG_STATE_WANT_SYNC ||
xlog_is_shutdown(log));
release_iclog:
- error = xlog_state_release_iclog(log, iclog, 0);
+ error = xlog_state_release_iclog(log, iclog);
spin_unlock(&log->l_icloglock);
return error;
}
@@ -2630,7 +2616,7 @@ xlog_write(
spin_lock(&log->l_icloglock);
xlog_state_finish_copy(log, iclog, record_cnt, data_cnt);
- error = xlog_state_release_iclog(log, iclog, 0);
+ error = xlog_state_release_iclog(log, iclog);
spin_unlock(&log->l_icloglock);
return error;
@@ -3054,7 +3040,7 @@ xlog_state_get_iclog_space(
* reference to the iclog.
*/
if (!atomic_add_unless(&iclog->ic_refcnt, -1, 1))
- error = xlog_state_release_iclog(log, iclog, 0);
+ error = xlog_state_release_iclog(log, iclog);
spin_unlock(&log->l_icloglock);
if (error)
return error;
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index b59cc9c0961c..eafe30843ff0 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -681,11 +681,21 @@ xlog_cil_set_ctx_write_state(
* The LSN we need to pass to the log items on transaction
* commit is the LSN reported by the first log vector write, not
* the commit lsn. If we use the commit record lsn then we can
- * move the tail beyond the grant write head.
+ * move the grant write head beyond the tail LSN and overwrite
+ * it.
*/
ctx->start_lsn = lsn;
wake_up_all(&cil->xc_start_wait);
spin_unlock(&cil->xc_push_lock);
+
+ /*
+ * Make sure the metadata we are about to overwrite in the log
+ * has been flushed to stable storage before this iclog is
+ * issued.
+ */
+ spin_lock(&cil->xc_log->l_icloglock);
+ iclog->ic_flags |= XLOG_ICL_NEED_FLUSH;
+ spin_unlock(&cil->xc_log->l_icloglock);
return;
}
@@ -864,10 +874,7 @@ xlog_cil_push_work(
struct xfs_trans_header thdr;
struct xfs_log_iovec lhdr;
struct xfs_log_vec lvhdr = { NULL };
- xfs_lsn_t preflush_tail_lsn;
xfs_csn_t push_seq;
- struct bio bio;
- DECLARE_COMPLETION_ONSTACK(bdev_flush);
bool push_commit_stable;
new_ctx = xlog_cil_ctx_alloc();
@@ -937,23 +944,6 @@ xlog_cil_push_work(
list_add(&ctx->committing, &cil->xc_committing);
spin_unlock(&cil->xc_push_lock);
- /*
- * The CIL is stable at this point - nothing new will be added to it
- * because we hold the flush lock exclusively. Hence we can now issue
- * a cache flush to ensure all the completed metadata in the journal we
- * are about to overwrite is on stable storage.
- *
- * Because we are issuing this cache flush before we've written the
- * tail lsn to the iclog, we can have metadata IO completions move the
- * tail forwards between the completion of this flush and the iclog
- * being written. In this case, we need to re-issue the cache flush
- * before the iclog write. To detect whether the log tail moves, sample
- * the tail LSN *before* we issue the flush.
- */
- preflush_tail_lsn = atomic64_read(&log->l_tail_lsn);
- xfs_flush_bdev_async(&bio, log->l_mp->m_ddev_targp->bt_bdev,
- &bdev_flush);
-
/*
* Pull all the log vectors off the items in the CIL, and remove the
* items from the CIL. We don't need the CIL lock here because it's only
@@ -1030,12 +1020,6 @@ xlog_cil_push_work(
lvhdr.lv_iovecp = &lhdr;
lvhdr.lv_next = ctx->lv_chain;
- /*
- * Before we format and submit the first iclog, we have to ensure that
- * the metadata writeback ordering cache flush is complete.
- */
- wait_for_completion(&bdev_flush);
-
error = xlog_cil_write_chain(ctx, &lvhdr);
if (error)
goto out_abort_free_ticket;
@@ -1094,7 +1078,7 @@ xlog_cil_push_work(
if (push_commit_stable &&
ctx->commit_iclog->ic_state == XLOG_STATE_ACTIVE)
xlog_state_switch_iclogs(log, ctx->commit_iclog, 0);
- xlog_state_release_iclog(log, ctx->commit_iclog, preflush_tail_lsn);
+ xlog_state_release_iclog(log, ctx->commit_iclog);
/* Not safe to reference ctx now! */
@@ -1115,7 +1099,7 @@ xlog_cil_push_work(
return;
}
spin_lock(&log->l_icloglock);
- xlog_state_release_iclog(log, ctx->commit_iclog, 0);
+ xlog_state_release_iclog(log, ctx->commit_iclog);
/* Not safe to reference ctx now! */
spin_unlock(&log->l_icloglock);
}
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index 844fbeec3545..f3d68ca39f45 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -524,8 +524,7 @@ void xfs_log_ticket_regrant(struct xlog *log, struct xlog_ticket *ticket);
void xlog_state_switch_iclogs(struct xlog *log, struct xlog_in_core *iclog,
int eventual_size);
-int xlog_state_release_iclog(struct xlog *log, struct xlog_in_core *iclog,
- xfs_lsn_t log_tail_lsn);
+int xlog_state_release_iclog(struct xlog *log, struct xlog_in_core *iclog);
/*
* When we crack an atomic LSN, we sample it first so that the value will not
--
2.37.0.rc0.161.g10f37bed90-goog
