Re: [PATCH 1/4] generic: check userspace handling of extreme timestamps

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 22, 2021 at 02:16:28PM -0700, Allison Henderson wrote:
> 
> 
> On 4/20/21 5:23 PM, Darrick J. Wong wrote:
> > From: Darrick J. Wong <djwong@xxxxxxxxxx>
> > 
> > These two tests ensure we can store and retrieve timestamps on the
> > extremes of the date ranges supported by userspace, and the common
> > places where overflows can happen.
> > 
> > They differ from generic/402 in that they don't constrain the dates
> > tested to the range that the filesystem claims to support; we attempt
> > various things that /userspace/ can parse, and then check that the vfs
> > clamps and persists the values correctly.
> > 
> > Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
> > Reviewed-by: Amir Goldstein <amir73il@xxxxxxxxx>
> Looks ok to me.  The tests have quite a bit of overlap, but they're pretty
> small too.

Yeah.  The difference between 721 and 722 is that 722 tests that
timestamp updates work properly if the fs goes down right after an
update.

> I think if we add on any more, probably we should think about a
> common/bigtime file?  But for now, I think it's fine.

Noted.  Thanks for reviewing this series!

--D

> 
> Reviewed-by: Allison Henderson <allison.henderson@xxxxxxxxxx>
> 
> > ---
> >   tests/generic/721     |  123 ++++++++++++++++++++++++++++++++++++++++++++++++
> >   tests/generic/721.out |    2 +
> >   tests/generic/722     |  125 +++++++++++++++++++++++++++++++++++++++++++++++++
> >   tests/generic/722.out |    1
> >   tests/generic/group   |    6 ++
> >   5 files changed, 255 insertions(+), 2 deletions(-)
> >   create mode 100755 tests/generic/721
> >   create mode 100644 tests/generic/721.out
> >   create mode 100755 tests/generic/722
> >   create mode 100644 tests/generic/722.out
> > 
> > 
> > diff --git a/tests/generic/721 b/tests/generic/721
> > new file mode 100755
> > index 00000000..9198b6b4
> > --- /dev/null
> > +++ b/tests/generic/721
> > @@ -0,0 +1,123 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> > +#
> > +# FS QA Test No. 721
> > +#
> > +# Make sure we can store and retrieve timestamps on the extremes of the
> > +# date ranges supported by userspace, and the common places where overflows
> > +# can happen.
> > +#
> > +# This differs from generic/402 in that we don't constrain ourselves to the
> > +# range that the filesystem claims to support; we attempt various things that
> > +# /userspace/ can parse, and then check that the vfs clamps and persists the
> > +# values correctly.
> > +#
> > +# NOTE: Old kernels (pre 5.4) allow filesystems to truncate timestamps silently
> > +# when writing timestamps to disk!  This test detects this silent truncation
> > +# and fails.  If you see a failure on such a kernel, contact your distributor
> > +# for an update.
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1    # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +	cd /
> > +	rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +
> > +# real QA test starts here
> > +_supported_fs generic
> > +_require_scratch
> > +
> > +rm -f $seqres.full
> > +
> > +_scratch_mkfs > $seqres.full
> > +_scratch_mount
> > +
> > +# Does our userspace even support large dates?
> > +test_bigdates=1
> > +touch -d 'May 30 01:53:03 UTC 2514' $SCRATCH_MNT 2>/dev/null || test_bigdates=0
> > +
> > +# And can we do statx?
> > +test_statx=1
> > +($XFS_IO_PROG -c 'help statx' | grep -q 'Print raw statx' && \
> > + $XFS_IO_PROG -c 'statx -r' $SCRATCH_MNT 2>/dev/null | grep -q 'stat.mtime') || \
> > +	test_statx=0
> > +
> > +echo "Userspace support of large timestamps: $test_bigdates" >> $seqres.full
> > +echo "xfs_io support of statx: $test_statx" >> $seqres.full
> > +
> > +touchme() {
> > +	local arg="$1"
> > +	local name="$2"
> > +
> > +	echo "$arg" > $SCRATCH_MNT/t_$name
> > +	touch -d "$arg" $SCRATCH_MNT/t_$name
> > +}
> > +
> > +report() {
> > +	local files=($SCRATCH_MNT/t_*)
> > +	for file in "${files[@]}"; do
> > +		echo "${file}: $(cat "${file}")"
> > +		TZ=UTC stat -c '%y %Y %n' "${file}"
> > +		test $test_statx -gt 0 && \
> > +			$XFS_IO_PROG -c 'statx -r' "${file}" | grep 'stat.mtime'
> > +	done
> > +}
> > +
> > +# -2147483648 (S32_MIN, or classic unix min)
> > +touchme 'Dec 13 20:45:52 UTC 1901' s32_min
> > +
> > +# 2147483647 (S32_MAX, or classic unix max)
> > +touchme 'Jan 19 03:14:07 UTC 2038' s32_max
> > +
> > +# 7956915742, all twos
> > +touchme 'Feb 22 22:22:22 UTC 2222' all_twos
> > +
> > +if [ $test_bigdates -gt 0 ]; then
> > +	# 16299260424 (u64 nsec counter from s32_min, like xfs does)
> > +	touchme 'Tue Jul  2 20:20:24 UTC 2486' u64ns_from_s32_min
> > +
> > +	# 15032385535 (u34 time if you start from s32_min, like ext4 does)
> > +	touchme 'May 10 22:38:55 UTC 2446' u34_from_s32_min
> > +
> > +	# 17179869183 (u34 time if you start from the unix epoch)
> > +	touchme 'May 30 01:53:03 UTC 2514' u34_max
> > +
> > +	# Latest date we can synthesize(?)
> > +	touchme 'Dec 31 23:59:59 UTC 2147483647' abs_max_time
> > +
> > +	# Earliest date we can synthesize(?)
> > +	touchme 'Jan 1 00:00:00 UTC 0' abs_min_time
> > +fi
> > +
> > +# Query timestamps from incore
> > +echo before >> $seqres.full
> > +report > $tmp.before_remount
> > +cat $tmp.before_remount >> $seqres.full
> > +
> > +_scratch_cycle_mount
> > +
> > +# Query timestamps from disk
> > +echo after >> $seqres.full
> > +report > $tmp.after_remount
> > +cat $tmp.after_remount >> $seqres.full
> > +
> > +# Did they match?
> > +cmp -s $tmp.before_remount $tmp.after_remount
> > +
> > +# success, all done
> > +echo Silence is golden.
> > +status=0
> > +exit
> > diff --git a/tests/generic/721.out b/tests/generic/721.out
> > new file mode 100644
> > index 00000000..b2bc6d58
> > --- /dev/null
> > +++ b/tests/generic/721.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 721
> > +Silence is golden.
> > diff --git a/tests/generic/722 b/tests/generic/722
> > new file mode 100755
> > index 00000000..305c3bd6
> > --- /dev/null
> > +++ b/tests/generic/722
> > @@ -0,0 +1,125 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> > +#
> > +# FS QA Test No. 722
> > +#
> > +# Make sure we can store and retrieve timestamps on the extremes of the
> > +# date ranges supported by userspace, and the common places where overflows
> > +# can happen.  This test also ensures that the timestamps are persisted
> > +# correctly after a shutdown.
> > +#
> > +# This differs from generic/402 in that we don't constrain ourselves to the
> > +# range that the filesystem claims to support; we attempt various things that
> > +# /userspace/ can parse, and then check that the vfs clamps and persists the
> > +# values correctly.
> > +#
> > +# NOTE: Old kernels (pre 5.4) allow filesystems to truncate timestamps silently
> > +# when writing timestamps to disk!  This test detects this silent truncation
> > +# and fails.  If you see a failure on such a kernel, contact your distributor
> > +# for an update.
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1    # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +	cd /
> > +	rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +
> > +# real QA test starts here
> > +_supported_fs generic
> > +_require_scratch
> > +_require_scratch_shutdown
> > +
> > +rm -f $seqres.full
> > +
> > +_scratch_mkfs > $seqres.full
> > +_scratch_mount
> > +
> > +# Does our userspace even support large dates?
> > +test_bigdates=1
> > +touch -d 'May 30 01:53:03 UTC 2514' $SCRATCH_MNT 2>/dev/null || test_bigdates=0
> > +
> > +# And can we do statx?
> > +test_statx=1
> > +($XFS_IO_PROG -c 'help statx' | grep -q 'Print raw statx' && \
> > + $XFS_IO_PROG -c 'statx -r' $SCRATCH_MNT 2>/dev/null | grep -q 'stat.mtime') || \
> > +	test_statx=0
> > +
> > +echo "Userspace support of large timestamps: $test_bigdates" >> $seqres.full
> > +echo "xfs_io support of statx: $test_statx" >> $seqres.full
> > +
> > +touchme() {
> > +	local arg="$1"
> > +	local name="$2"
> > +
> > +	echo "$arg" > $SCRATCH_MNT/t_$name
> > +	touch -d "$arg" $SCRATCH_MNT/t_$name
> > +}
> > +
> > +report() {
> > +	local files=($SCRATCH_MNT/t_*)
> > +	for file in "${files[@]}"; do
> > +		echo "${file}: $(cat "${file}")"
> > +		TZ=UTC stat -c '%y %Y %n' "${file}"
> > +		test $test_statx -gt 0 && \
> > +			$XFS_IO_PROG -c 'statx -r' "${file}" | grep 'stat.mtime'
> > +	done
> > +}
> > +
> > +# -2147483648 (S32_MIN, or classic unix min)
> > +touchme 'Dec 13 20:45:52 UTC 1901' s32_min
> > +
> > +# 2147483647 (S32_MAX, or classic unix max)
> > +touchme 'Jan 19 03:14:07 UTC 2038' s32_max
> > +
> > +# 7956915742, all twos
> > +touchme 'Feb 22 22:22:22 UTC 2222' all_twos
> > +
> > +if [ $test_bigdates -gt 0 ]; then
> > +	# 16299260424 (u64 nsec counter from s32_min, like xfs does)
> > +	touchme 'Tue Jul  2 20:20:24 UTC 2486' u64ns_from_s32_min
> > +
> > +	# 15032385535 (u34 time if you start from s32_min, like ext4 does)
> > +	touchme 'May 10 22:38:55 UTC 2446' u34_from_s32_min
> > +
> > +	# 17179869183 (u34 time if you start from the unix epoch)
> > +	touchme 'May 30 01:53:03 UTC 2514' u34_max
> > +
> > +	# Latest date we can synthesize(?)
> > +	touchme 'Dec 31 23:59:59 UTC 2147483647' abs_max_time
> > +
> > +	# Earliest date we can synthesize(?)
> > +	touchme 'Jan 1 00:00:00 UTC 0' abs_min_time
> > +fi
> > +
> > +# Query timestamps from incore
> > +echo before >> $seqres.full
> > +report > $tmp.before_crash
> > +cat $tmp.before_crash >> $seqres.full
> > +
> > +_scratch_shutdown -f
> > +_scratch_cycle_mount
> > +
> > +# Query timestamps from disk
> > +echo after >> $seqres.full
> > +report > $tmp.after_crash
> > +cat $tmp.after_crash >> $seqres.full
> > +
> > +# Did they match?
> > +cmp -s $tmp.before_crash $tmp.after_crash
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/generic/722.out b/tests/generic/722.out
> > new file mode 100644
> > index 00000000..83acd5cf
> > --- /dev/null
> > +++ b/tests/generic/722.out
> > @@ -0,0 +1 @@
> > +QA output created by 722
> > diff --git a/tests/generic/group b/tests/generic/group
> > index 033465f1..21ac0c8f 100644
> > --- a/tests/generic/group
> > +++ b/tests/generic/group
> > @@ -260,7 +260,7 @@
> >   255 auto quick prealloc punch
> >   256 auto quick punch
> >   257 dir auto quick
> > -258 auto quick
> > +258 auto quick bigtime
> >   259 auto quick clone zero
> >   260 auto quick trim
> >   261 auto quick clone collapse
> > @@ -404,7 +404,7 @@
> >   399 auto encrypt
> >   400 auto quick quota
> >   401 auto quick
> > -402 auto quick rw
> > +402 auto quick rw bigtime
> >   403 auto quick attr
> >   404 auto quick insert
> >   405 auto mkfs thin
> > @@ -636,3 +636,5 @@
> >   631 auto rw overlay rename
> >   632 auto quick mount
> >   633 auto quick atime attr cap idmapped io_uring mount perms rw unlink
> > +721 auto quick atime bigtime
> > +722 auto quick atime bigtime shutdown
> > 



[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux