From: Darrick J. Wong <djwong@xxxxxxxxxx>
Make sure we can actually upgrade filesystems to support inode btree
counters.
Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
Reviewed-by: Brian Foster <bfoster@xxxxxxxxxx>
Reviewed-by: Allison Henderson <allison.henderson@xxxxxxxxxx>
---
v2.1: fix helper bogosity, broken regexps.
---
common/xfs | 13 +++++++
tests/xfs/910 | 98 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/910.out | 23 ++++++++++++
tests/xfs/group | 1 +
4 files changed, 135 insertions(+)
create mode 100755 tests/xfs/910
create mode 100644 tests/xfs/910.out
diff --git a/common/xfs b/common/xfs
index 4f1a4dba..848311b4 100644
--- a/common/xfs
+++ b/common/xfs
@@ -1138,3 +1138,16 @@ _require_xfs_repair_upgrade()
grep -q 'unknown option' && \
_notrun "xfs_repair does not support upgrading fs with $type"
}
+
+# Require that the scratch device exists, that mkfs can format with inobtcount
+# enabled, and that the kernel can mount such a filesystem.
+_require_scratch_xfs_inobtcount()
+{
+ _require_scratch
+
+ _scratch_mkfs -m inobtcount=1 &> /dev/null || \
+ _notrun "mkfs.xfs doesn't support inobtcount feature"
+ _try_scratch_mount || \
+ _notrun "kernel doesn't support xfs inobtcount feature"
+ _scratch_unmount
+}
diff --git a/tests/xfs/910 b/tests/xfs/910
new file mode 100755
index 00000000..0ed2dc4f
--- /dev/null
+++ b/tests/xfs/910
@@ -0,0 +1,98 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2021 Oracle. All Rights Reserved.
+#
+# FS QA Test No. 910
+#
+# Check that we can upgrade a filesystem to support inobtcount and that
+# everything works properly after the upgrade.
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs xfs
+_require_scratch_xfs_inobtcount
+_require_command "$XFS_ADMIN_PROG" "xfs_admin"
+_require_xfs_repair_upgrade inobtcount
+
+rm -f $seqres.full
+
+# Make sure we can't format a filesystem with inobtcount and not finobt.
+_scratch_mkfs -m crc=1,inobtcount=1,finobt=0 &> $seqres.full && \
+ echo "Should not be able to format with inobtcount but not finobt."
+
+# Make sure we can't upgrade a V4 filesystem
+_scratch_mkfs -m crc=0,inobtcount=0,finobt=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_check_scratch_xfs_features INOBTCNT
+
+# Make sure we can't upgrade a filesystem to inobtcount without finobt.
+_scratch_mkfs -m crc=1,inobtcount=0,finobt=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_check_scratch_xfs_features INOBTCNT
+
+# Format V5 filesystem without inode btree counter support and populate it.
+_scratch_mkfs -m crc=1,inobtcount=0 >> $seqres.full
+_scratch_mount
+
+mkdir $SCRATCH_MNT/stress
+$FSSTRESS_PROG -d $SCRATCH_MNT/stress -n 1000 >> $seqres.full
+echo moo > $SCRATCH_MNT/urk
+
+_scratch_unmount
+
+# Upgrade filesystem to have the counters and inject failure into repair and
+# make sure that the only path forward is to re-run repair on the filesystem.
+echo "Fail partway through upgrading"
+XFS_REPAIR_FAIL_AFTER_PHASE=2 _scratch_xfs_repair -c inobtcount=1 2>> $seqres.full
+test $? -eq 137 || echo "repair should have been killed??"
+_check_scratch_xfs_features NEEDSREPAIR INOBTCNT
+_try_scratch_mount &> $tmp.mount
+res=$?
+_filter_scratch < $tmp.mount
+if [ $res -eq 0 ]; then
+ echo "needsrepair should have prevented mount"
+ _scratch_unmount
+fi
+
+echo "Re-run repair to finish upgrade"
+_scratch_xfs_repair 2>> $seqres.full
+_check_scratch_xfs_features NEEDSREPAIR INOBTCNT
+
+echo "Filesystem should be usable again"
+_scratch_mount
+$FSSTRESS_PROG -d $SCRATCH_MNT/stress -n 1000 >> $seqres.full
+_scratch_unmount
+_check_scratch_fs
+_check_scratch_xfs_features INOBTCNT
+
+echo "Make sure we have nonzero counters"
+_scratch_xfs_db -c 'agi 0' -c 'print ino_blocks fino_blocks' | \
+ sed -e 's/= 0$/= ZERO/g' -e 's/= [0-9]*/= NONZERO/g'
+
+echo "Make sure we can't re-add inobtcount"
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+
+echo "Mount again, look at our files"
+_scratch_mount >> $seqres.full
+cat $SCRATCH_MNT/urk
+
+status=0
+exit
diff --git a/tests/xfs/910.out b/tests/xfs/910.out
new file mode 100644
index 00000000..1bf040d5
--- /dev/null
+++ b/tests/xfs/910.out
@@ -0,0 +1,23 @@
+QA output created by 910
+Running xfs_repair to upgrade filesystem.
+Inode btree count feature only supported on V5 filesystems.
+FEATURES: INOBTCNT:NO
+Running xfs_repair to upgrade filesystem.
+Inode btree count feature requires free inode btree.
+FEATURES: INOBTCNT:NO
+Fail partway through upgrading
+Adding inode btree counts to filesystem.
+FEATURES: NEEDSREPAIR:YES INOBTCNT:YES
+mount: SCRATCH_MNT: mount(2) system call failed: Structure needs cleaning.
+Re-run repair to finish upgrade
+FEATURES: NEEDSREPAIR:NO INOBTCNT:YES
+Filesystem should be usable again
+FEATURES: INOBTCNT:YES
+Make sure we have nonzero counters
+ino_blocks = NONZERO
+fino_blocks = NONZERO
+Make sure we can't re-add inobtcount
+Running xfs_repair to upgrade filesystem.
+Filesystem already has inode btree counts.
+Mount again, look at our files
+moo
diff --git a/tests/xfs/group b/tests/xfs/group
index 4231d1d5..4c70cff1 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -526,3 +526,4 @@
768 auto quick repair
770 auto repair
773 auto quick admin
+910 auto quick inobtcount
