xfs/502 currently creates a default of 30k unlinked files per CPU. While this completes in a reasonable amount of time on systems with lesser numbers of CPUs, this scales poorly on high CPU count systems that are otherwise testing smaller default filesystems. For example, on an 80xcpu box and a 15GB (4 AG) XFS filesystem, xfs/502 requires 3 hours to complete. The same test on a 4xcpu vm (or the 80xcpu hardware with an 80AG filesystem instead of the default of 4AGs) completes in a little over 5 minutes. This is a rather severe thrashing breakdown that doesn't add much value to the test coverage. Address this problem by scaling the file count to the AG count of the filesystem rather than the CPU count of the test system. Since the AG count is likely to be less than the CPU count, bump the default scaling factor a bit from 30k per CPU to 50k per AG. From there, larger counts can still be exercised via the global load factor configuration. Signed-off-by: Brian Foster <bfoster@xxxxxxxxxx> --- tests/xfs/502 | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/tests/xfs/502 b/tests/xfs/502 index 337ae07e..202bfbc6 100755 --- a/tests/xfs/502 +++ b/tests/xfs/502 @@ -28,6 +28,7 @@ _cleanup() # get standard environment, filters and checks . ./common/rc . ./common/inject +. ./common/filter # real QA test starts here _supported_fs xfs @@ -36,15 +37,21 @@ _require_scratch _require_test_program "t_open_tmpfiles" rm -f $seqres.full -_scratch_mkfs >> $seqres.full 2>&1 + +_scratch_mkfs | _filter_mkfs 2> $tmp.mkfs > /dev/null +cat $tmp.mkfs >> $seqres.full +. $tmp.mkfs + _scratch_mount # Load up all the CPUs, two threads per CPU. nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) -# Set ULIMIT_NOFILE to min(file-max / $nr_cpus / 2, 30000 files per cpu per LOAD_FACTOR) +# Set ULIMIT_NOFILE to min(file-max / $nr_cpus / 2, 50000 files per AG per LOAD_FACTOR) # so that this test doesn't take forever or OOM the box -max_files=$((30000 * LOAD_FACTOR)) +max_files=$((50000 * agcount * LOAD_FACTOR)) +max_files=$((max_files / $nr_cpus)) + max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / $nr_cpus / 2 )) test $max_allowable_files -gt 0 && test $max_files -gt $max_allowable_files && \ max_files=$max_allowable_files -- 2.26.3
