[PATCH 3/3] xfs: test inobtcount upgrade

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Darrick J. Wong <djwong@xxxxxxxxxx>

Make sure we can actually upgrade filesystems to support inode btree
counters.

Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
---
 common/xfs        |   20 ++++++
 tests/xfs/764     |  190 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/764.out |   27 ++++++++
 tests/xfs/910     |   84 +++++++++++++++++++++++
 tests/xfs/910.out |   12 +++
 tests/xfs/group   |    2 +
 6 files changed, 335 insertions(+)
 create mode 100755 tests/xfs/764
 create mode 100644 tests/xfs/764.out
 create mode 100755 tests/xfs/910
 create mode 100644 tests/xfs/910.out


diff --git a/common/xfs b/common/xfs
index 9cb373ba..a316f384 100644
--- a/common/xfs
+++ b/common/xfs
@@ -1085,3 +1085,23 @@ _require_xfs_copy()
 	[ "$USE_EXTERNAL" = yes ] && \
 		_notrun "Cannot xfs_copy with external devices"
 }
+
+_require_xfs_repair_upgrade()
+{
+	local type="$1"
+
+	$XFS_REPAIR_PROG -c "$type=narf" 2>&1 | \
+		grep -q 'unknown option' && \
+		_notrun "xfs_repair does not support upgrading fs with $type"
+}
+
+_require_xfs_scratch_inobtcount()
+{
+	_require_scratch
+
+	_scratch_mkfs -m inobtcount=1 &> /dev/null || \
+		_notrun "mkfs.xfs doesn't have inobtcount feature"
+	_try_scratch_mount || \
+		_notrun "inobtcount not supported by scratch filesystem type: $FSTYP"
+	_scratch_unmount
+}
diff --git a/tests/xfs/764 b/tests/xfs/764
new file mode 100755
index 00000000..cf6784d2
--- /dev/null
+++ b/tests/xfs/764
@@ -0,0 +1,190 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2021 Oracle.  All Rights Reserved.
+#
+# FS QA Test No. 764
+#
+# Functional testing for xfs_admin -O, which is a new switch that enables us to
+# add features to an existing filesystem.  In these test scenarios, we try to
+# add the inode btree counter 'feature' to the filesystem, and make sure that
+# NEEDSREPAIR (aka the thing that prevents us from mounting after an upgrade
+# fails) is clear if the upgraded succeeds and set if it fails.
+#
+# The first scenario tests that we can't add inobtcount to the V4 format,
+# which is now deprecated.
+#
+# The middle five scenarios ensure that xfs_admin -O works even when external
+# log devices and realtime volumes are specified.  This part is purely an
+# exerciser for the userspace tools; kernel support for those features is not
+# required.
+#
+# The last scenario uses a xfs_repair debug knob to simulate failure during an
+# inobtcount upgrade, then checks that mounts fail when the flag is enabled,
+# that repair clears the flag, and mount works after repair.
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.* $fake_logfile $fake_rtfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs xfs
+_require_test
+_require_xfs_scratch_inobtcount
+_require_command "$XFS_ADMIN_PROG" "xfs_admin"
+_require_xfs_repair_upgrade inobtcount
+
+rm -f $seqres.full
+
+note() {
+	echo "$@" | tee -a $seqres.full
+}
+
+note "S1: Cannot add inobtcount to a V4 fs"
+_scratch_mkfs -m crc=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+
+# Middle five scenarios: Make sure upgrades work with various external device
+# configurations.
+note "S2: Check that setting with xfs_admin + logdev works"
+fake_logfile=$TEST_DIR/scratch.log
+rm -f $fake_logfile
+truncate -s 500m $fake_logfile
+
+old_external=$USE_EXTERNAL
+old_logdev=$SCRATCH_LOGDEV
+USE_EXTERNAL=yes
+SCRATCH_LOGDEV=$fake_logfile
+
+_scratch_mkfs -m crc=1,inobtcount=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_scratch_xfs_db -c 'version' | grep -q NEEDSREPAIR && \
+	echo "xfs_admin should have cleared needsrepair?"
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT || \
+	echo "xfs_admin should have set inobtcount?"
+
+note "Check clean"
+_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
+
+USE_EXTERNAL=$old_external
+SCRATCH_LOGDEV=$old_logdev
+
+note "S3: Check that setting with xfs_admin + realtime works"
+fake_rtfile=$TEST_DIR/scratch.rt
+rm -f $fake_rtfile
+truncate -s 500m $fake_rtfile
+
+old_external=$USE_EXTERNAL
+old_rtdev=$SCRATCH_RTDEV
+USE_EXTERNAL=yes
+SCRATCH_RTDEV=$fake_rtfile
+
+_scratch_mkfs -m crc=1,inobtcount=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_scratch_xfs_db -c 'version' | grep -q NEEDSREPAIR && \
+	echo "xfs_admin should have cleared needsrepair?"
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT || \
+	echo "xfs_admin should have set inobtcount?"
+
+note "Check clean"
+_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
+
+USE_EXTERNAL=$old_external
+SCRATCH_RTDEV=$old_rtdev
+
+note "S4: Check that setting with xfs_admin + realtime + logdev works"
+old_external=$USE_EXTERNAL
+old_logdev=$SCRATCH_LOGDEV
+old_rtdev=$SCRATCH_RTDEV
+USE_EXTERNAL=yes
+SCRATCH_LOGDEV=$fake_logfile
+SCRATCH_RTDEV=$fake_rtfile
+
+_scratch_mkfs -m crc=1,inobtcount=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_scratch_xfs_db -c 'version' | grep -q NEEDSREPAIR && \
+	echo "xfs_admin should have cleared needsrepair?"
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT || \
+	echo "xfs_admin should have set inobtcount?"
+
+note "Check clean"
+_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
+
+USE_EXTERNAL=$old_external
+SCRATCH_LOGDEV=$old_logdev
+SCRATCH_RTDEV=$old_rtdev
+
+note "S5: Check that setting with xfs_admin + nortdev + nologdev works"
+old_external=$USE_EXTERNAL
+old_logdev=$SCRATCH_LOGDEV
+old_rtdev=$SCRATCH_RTDEV
+USE_EXTERNAL=
+SCRATCH_LOGDEV=
+SCRATCH_RTDEV=
+
+_scratch_mkfs -m crc=1,inobtcount=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_scratch_xfs_db -c 'version' | grep -q NEEDSREPAIR && \
+	echo "xfs_admin should have cleared needsrepair?"
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT || \
+	echo "xfs_admin should have set inobtcount?"
+
+note "Check clean"
+_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
+
+USE_EXTERNAL=$old_external
+SCRATCH_LOGDEV=$old_logdev
+SCRATCH_RTDEV=$old_rtdev
+
+# Run our test with the test runner's config last so that the post-test check
+# won't trip over our artificial log/rt devices
+note "S6: Check that setting with xfs_admin testrunner config works"
+_scratch_mkfs -m crc=1,inobtcount=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_scratch_xfs_db -c 'version' | grep -q NEEDSREPAIR && \
+	echo "xfs_admin should have cleared needsrepair?"
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT || \
+	echo "xfs_admin should have set inobtcount?"
+
+note "Check clean"
+_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
+
+note "S7: Simulate failure during upgrade process"
+_scratch_mkfs -m crc=1,inobtcount=0 >> $seqres.full
+XFS_REPAIR_FAIL_AFTER_PHASE=2 _scratch_xfs_repair -c inobtcount=1 2>> $seqres.full
+test $? -eq 137 || echo "repair should have been killed??"
+_scratch_xfs_db -c 'version' | grep -q NEEDSREPAIR || \
+	echo "needsrepair should have been set on fs"
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT || \
+	echo "inobtcount should have been set on fs"
+_try_scratch_mount &> $tmp.mount
+res=$?
+_filter_scratch < $tmp.mount
+if [ $res -eq 0 ]; then
+	echo "needsrepair should have prevented mount"
+	_scratch_unmount
+fi
+_scratch_xfs_repair 2>> $seqres.full
+_scratch_xfs_db -c 'version' | grep -q NEEDSREPAIR && \
+	echo "xfs_repair should have cleared needsrepair?"
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT || \
+	echo "xfs_admin should have set inobtcount?"
+_scratch_mount
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/764.out b/tests/xfs/764.out
new file mode 100644
index 00000000..067639c9
--- /dev/null
+++ b/tests/xfs/764.out
@@ -0,0 +1,27 @@
+QA output created by 764
+S1: Cannot add inobtcount to a V4 fs
+Running xfs_repair to upgrade filesystem.
+Inode btree count feature only supported on V5 filesystems.
+S2: Check that setting with xfs_admin + logdev works
+Running xfs_repair to upgrade filesystem.
+Adding inode btree counts to filesystem.
+Check clean
+S3: Check that setting with xfs_admin + realtime works
+Running xfs_repair to upgrade filesystem.
+Adding inode btree counts to filesystem.
+Check clean
+S4: Check that setting with xfs_admin + realtime + logdev works
+Running xfs_repair to upgrade filesystem.
+Adding inode btree counts to filesystem.
+Check clean
+S5: Check that setting with xfs_admin + nortdev + nologdev works
+Running xfs_repair to upgrade filesystem.
+Adding inode btree counts to filesystem.
+Check clean
+S6: Check that setting with xfs_admin testrunner config works
+Running xfs_repair to upgrade filesystem.
+Adding inode btree counts to filesystem.
+Check clean
+S7: Simulate failure during upgrade process
+Adding inode btree counts to filesystem.
+mount: SCRATCH_MNT: mount(2) system call failed: Structure needs cleaning.
diff --git a/tests/xfs/910 b/tests/xfs/910
new file mode 100755
index 00000000..4bf79db2
--- /dev/null
+++ b/tests/xfs/910
@@ -0,0 +1,84 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2021 Oracle.  All Rights Reserved.
+#
+# FS QA Test No. 910
+#
+# Check that we can upgrade a filesystem to support inobtcount and that
+# everything works properly after the upgrade.
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs xfs
+_require_xfs_scratch_inobtcount
+_require_command "$XFS_ADMIN_PROG" "xfs_admin"
+_require_xfs_repair_upgrade inobtcount
+
+rm -f $seqres.full
+
+# Make sure we can't format a filesystem with inobtcount and not finobt.
+_scratch_mkfs -m crc=1,inobtcount=1,finobt=0 &> $seqres.full && \
+	echo "Should not be able to format with inobtcount but not finobt."
+
+# Make sure we can't upgrade a V4 filesystem
+_scratch_mkfs -m crc=0,inobtcount=0,finobt=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT && \
+	echo "Should not be able to upgrade to inobtcount without V5."
+
+# Make sure we can't upgrade a filesystem to inobtcount without finobt.
+_scratch_mkfs -m crc=1,inobtcount=0,finobt=0 >> $seqres.full
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT && \
+	echo "Should not be able to upgrade to inobtcount without finobt."
+
+# Format V5 filesystem without inode btree counter support and populate it
+_scratch_mkfs -m crc=1,inobtcount=0 >> $seqres.full
+_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' >> $seqres.full
+_scratch_mount >> $seqres.full
+
+echo moo > $SCRATCH_MNT/urk
+
+_scratch_unmount
+_check_scratch_fs
+
+# Now upgrade to inobtcount support
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_scratch_xfs_db -c 'version' | grep -q INOBTCNT || \
+	echo "Cannot detect new feature?"
+_check_scratch_fs
+_scratch_xfs_db -c 'version' -c 'sb 0' -c 'p' -c 'agi 0' -c 'p' >> $seqres.full
+
+# Make sure we have nonzero counters
+_scratch_xfs_db -c 'agi 0' -c 'print ino_blocks fino_blocks' | \
+	sed -e 's/= [1-9]*/= NONZERO/g'
+
+# Mount again, look at our files
+_scratch_mount >> $seqres.full
+cat $SCRATCH_MNT/urk
+
+# Make sure we can't re-add inobtcount
+_scratch_unmount
+_scratch_xfs_admin -O inobtcount=1 2>> $seqres.full
+_scratch_mount >> $seqres.full
+
+status=0
+exit
diff --git a/tests/xfs/910.out b/tests/xfs/910.out
new file mode 100644
index 00000000..c3cfbb80
--- /dev/null
+++ b/tests/xfs/910.out
@@ -0,0 +1,12 @@
+QA output created by 910
+Running xfs_repair to upgrade filesystem.
+Inode btree count feature only supported on V5 filesystems.
+Running xfs_repair to upgrade filesystem.
+Inode btree count feature requires free inode btree.
+Running xfs_repair to upgrade filesystem.
+Adding inode btree counts to filesystem.
+ino_blocks = NONZERO
+fino_blocks = NONZERO
+moo
+Running xfs_repair to upgrade filesystem.
+Filesystem already has inode btree counts.
diff --git a/tests/xfs/group b/tests/xfs/group
index 6aa7883e..28176409 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -517,7 +517,9 @@
 538 auto stress
 759 auto quick rw realtime
 760 auto quick rw realtime collapse insert unshare zero prealloc
+764 auto quick repair
 768 auto quick repair
 770 auto repair
+910 auto quick inobtcount
 917 auto quick db
 918 auto quick db




[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux