On Mon, Mar 15, 2021 at 02:06:35AM +0800, Eryu Guan wrote:
> On Mon, Mar 08, 2021 at 08:40:53PM -0800, Darrick J. Wong wrote:
> > From: Darrick J. Wong <djwong@xxxxxxxxxx>
> >
> > wenli xie reported a buffer cache deadlock when an overlayfs is mounted
> > atop xfs and overlayfs tries to replace a single-nlink file with a
> > whiteout file. This test reproduces that deadlock.
> >
> > Reported-by: wenli xie <wlxie7296@xxxxxxxxx>
> > Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
> > ---
> > tests/generic/1300 | 109 ++++++++++++++++++++++++++++++++++++++++++++++++
> > tests/generic/1300.out | 2 +
> > tests/generic/group | 1
> > 3 files changed, 112 insertions(+)
> > create mode 100755 tests/generic/1300
> > create mode 100644 tests/generic/1300.out
> >
> >
> > diff --git a/tests/generic/1300 b/tests/generic/1300
> > new file mode 100755
> > index 00000000..10df44e3
> > --- /dev/null
> > +++ b/tests/generic/1300
> > @@ -0,0 +1,109 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2021 Oracle. All Rights Reserved.
> > +#
> > +# FS QA Test No. 1300
> > +#
> > +# Reproducer for a deadlock in xfs_rename reported by Wenli Xie.
> > +#
> > +# When overlayfs is running on top of xfs and the user unlinks a file in the
> > +# overlay, overlayfs will create a whiteout inode and ask us to "rename" the
> > +# whiteout file atop the one being unlinked. If the file being unlinked loses
> > +# its one nlink, we then have to put the inode on the unlinked list.
> > +#
> > +# This requires us to grab the AGI buffer of the whiteout inode to take it
> > +# off the unlinked list (which is where whiteouts are created) and to grab
> > +# the AGI buffer of the file being deleted. If the whiteout was created in
> > +# a higher numbered AG than the file being deleted, we'll lock the AGIs in
> > +# the wrong order and deadlock.
> > +#
> > +# Note that this test doesn't do anything xfs-specific so it's a generic test.
> > +# This is a regression test for commit 6da1b4b1ab36 ("xfs: fix an ABBA deadlock
> > +# in xfs_rename").
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + stop_workers
> > + cd /
> > + rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +
> > +# real QA test starts here
> > +_supported_fs generic
> > +_require_scratch
> > +test "$FSTYP" = "overlay" && _notrun "Test does not apply to overlayfs."
> > +
> > +modprobe -q overlay
> > +grep -q overlay /proc/filesystems || _notrun "Test requires overlayfs."
>
> We have _require_ext2() and _require_tmpfs(), I think it's time to
> refactor them into a new _require_filesystem() helper?
Yeah, I'll refactor them into a new _require_extra_fs helper.
> > +
> > +rm -f $seqres.full
> > +
> > +_scratch_mkfs >> $seqres.full
> > +_scratch_mount
>
> Also, doing overlay mount requires the underlying to export d_type,
> perhaps we should do '_supports_filetype $SCRATCH_MNT' here, otherwise
> filesystems like nfs would fail the test.
Oh! Thank you for pointing that out.
>
> > +
> > +mkdir $SCRATCH_MNT/lowerdir
> > +mkdir $SCRATCH_MNT/lowerdir1
> > +mkdir $SCRATCH_MNT/lowerdir/etc
> > +mkdir $SCRATCH_MNT/workers
> > +echo salts > $SCRATCH_MNT/lowerdir/etc/access.conf
> > +touch $SCRATCH_MNT/running
> > +
> > +stop_workers() {
> > + test -e $SCRATCH_MNT/running || return
> > + rm -f $SCRATCH_MNT/running
> > +
> > + while [ "$(ls $SCRATCH_MNT/workers/ | wc -l)" -gt 0 ]; do
> > + wait
> > + done
> > +}
> > +
> > +worker() {
> > + local tag="$1"
> > + local mergedir="$SCRATCH_MNT/merged$tag"
> > + local l="lowerdir=$SCRATCH_MNT/lowerdir:$SCRATCH_MNT/lowerdir1"
> > + local u="upperdir=$SCRATCH_MNT/upperdir$tag"
> > + local w="workdir=$SCRATCH_MNT/workdir$tag"
> > + local i="index=off,nfs_export=off"
> > +
> > + touch $SCRATCH_MNT/workers/$tag
> > + while test -e $SCRATCH_MNT/running; do
> > + rm -rf $SCRATCH_MNT/merged$tag
> > + rm -rf $SCRATCH_MNT/upperdir$tag
> > + rm -rf $SCRATCH_MNT/workdir$tag
> > + mkdir $SCRATCH_MNT/merged$tag
> > + mkdir $SCRATCH_MNT/workdir$tag
> > + mkdir $SCRATCH_MNT/upperdir$tag
> > +
> > + mount -t overlay overlay -o "$l,$u,$w,$i" $mergedir
> > + mv $mergedir/etc/access.conf $mergedir/etc/access.conf.bak
> > + touch $mergedir/etc/access.conf
> > + mv $mergedir/etc/access.conf $mergedir/etc/access.conf.bak
> > + touch $mergedir/etc/access.conf
> > + umount $mergedir
> > + done
> > + rm -f $SCRATCH_MNT/workers/$tag
> > +}
> > +
> > +for i in $(seq 0 $((4 + LOAD_FACTOR)) ); do
> > + worker $i &
> > +done
> > +
> > +sleep $((30 * TIME_FACTOR))
> > +stop_workers
> > +
> > +echo Silence is golden.
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/generic/1300.out b/tests/generic/1300.out
> > new file mode 100644
> > index 00000000..5805d30d
> > --- /dev/null
> > +++ b/tests/generic/1300.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 1300
> > +Silence is golden.
> > diff --git a/tests/generic/group b/tests/generic/group
> > index 778aa8c4..2233a59d 100644
> > --- a/tests/generic/group
> > +++ b/tests/generic/group
> > @@ -631,3 +631,4 @@
> > 947 auto quick rw clone
> > 948 auto quick rw copy_range
> > 949 auto quick rw dedupe clone
> > +1300 auto rw overlay
>
> Also add 'rename' group?
Done.
--D
> Thanks,
> Eryu
