Re: [RFC[RAP] PATCH] xfs: allow setting and clearing of log incompat feature flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 14, 2021 at 08:31:05AM +1100, Dave Chinner wrote:
> On Thu, Jan 07, 2021 at 03:28:21PM -0800, Darrick J. Wong wrote:
> > On Tue, Dec 15, 2020 at 08:50:03AM -0500, Brian Foster wrote:
> > > On Tue, Dec 15, 2020 at 07:54:56AM +1100, Dave Chinner wrote:
> > > > On Mon, Dec 14, 2020 at 10:58:31AM -0500, Brian Foster wrote:
> > > > > On Sun, Dec 13, 2020 at 08:14:39AM +1100, Dave Chinner wrote:
> > > > > > On Fri, Dec 11, 2020 at 08:39:01AM -0500, Brian Foster wrote:
> > > > > > > On Fri, Dec 11, 2020 at 08:50:04AM +1100, Dave Chinner wrote:
> > > > > > > > As for a mechanism for dynamically adding log incompat flags?
> > > > > > > > Perhaps we just do that in xfs_trans_alloc() - add an log incompat
> > > > > > > > flags field into the transaction reservation structure, and if
> > > > > > > > xfs_trans_alloc() sees an incompat field set and the superblock
> > > > > > > > doesn't have it set, the first thing it does is run a "set log
> > > > > > > > incompat flag" transaction before then doing it's normal work...
> > > > > > > > 
> > > > > > > > This should be rare enough it doesn't have any measurable
> > > > > > > > performance overhead, and it's flexible enough to support any log
> > > > > > > > incompat feature we might need to implement...
> > > > > > > > 
> > > > > > > 
> > > > > > > But I don't think that is sufficient. As Darrick pointed out up-thread,
> > > > > > > the updated superblock has to be written back before we're allowed to
> > > > > > > commit transactions with incompatible items. Otherwise, an older kernel
> > > > > > > can attempt log recovery with incompatible items present if the
> > > > > > > filesystem crashes before the superblock is written back.
> > > > > > 
> > > > > > Sure, that's what the hook in xfs_trans_alloc() would do. It can do
> > > > > > the work in the context that is going to need it, and set a wait
> > > > > > flag for all incoming transactions that need a log incompat flag to
> > > > > > wait for it do it's work.  Once it's done and the flag is set, it
> > > > > > can continue and wake all the waiters now that the log incompat flag
> > > > > > has been set. Anything that doesn't need a log incompat flag can
> > > > > > just keep going and doesn't ever get blocked....
> > > > > > 
> > > > > 
> > > > > It would have to be a sync transaction plus sync AIL force in
> > > > > transaction allocation context if we were to log the superblock change,
> > > > > which sounds a bit hairy...
> > > > 
> > > > Well, we already do sync AIL forces in transaction reservation when
> > > > we run out of log space, so there's no technical reason for this
> > > > being a problem at all. xfs_trans_alloc() is expected to block
> > > > waiting on AIL tail pushing....
> > > > 
> > > > > > I suspect this is one of the rare occasions where an unlogged
> > > > > > modification makes an awful lot of sense: we don't even log that we
> > > > > > are adding a log incompat flag, we just do an atomic synchronous
> > > > > > write straight to the superblock to set the incompat flag(s). The
> > > > > > entire modification can be done under the superblock buffer lock to
> > > > > > serialise multiple transactions all trying to set incompat bits, and
> > > > > > we don't set the in-memory superblock incompat bit until after it
> > > > > > has been set and written to disk. Hence multiple waits can check the
> > > > > > flag after they've got the sb buffer lock, and they'll see that it's
> > > > > > already been set and just continue...
> > > > > > 
> > > > > 
> > > > > Agreed. That is a notable simplification and I think much more
> > > > > preferable than the above for the dynamic approach.
> > > > > 
> > > > > That said, note that dynamic feature bits might introduce complexity in
> > > > > more subtle ways. For example, nothing that I can see currently
> > > > > serializes idle log covering with an active transaction (that may have
> > > > > just set an incompat bit via some hook yet not committed anything to the
> > > > > log subsystem), so it might not be as simple as just adding a hook
> > > > > somewhere.
> > > > 
> > > > Right, we had to make log covering away of the CIL to prevent it
> > > > from idling while there were multiple active committed transactions
> > > > in memory. So the state machine only progresses if both the CIL and
> > > > AIL are empty. If we had some way of knowing that a transaction is
> > > > in progress, we could check that in xfs_log_need_covered() and we'd
> > > > stop the state machine progress at that point. But we got rid of the
> > > > active transaction counter that we could use for that....
> > > > 
> > > > [Hmmm, didn't I recently have a patch that re-introduced that
> > > > counter to fix some other "we need to know if there's an active
> > > > transaction running" issue? Can't remember what that was now...]
> > > > 
> > > 
> > > I think you removed it, actually, via commit b41b46c20c0bd ("xfs: remove
> > > the m_active_trans counter"). We subsequently discussed reintroducing
> > > the same concept for the quotaoff rework [1], which might be what you're
> > > thinking of. That uses a percpu rwsem since we don't really need a
> > > counter, but I suspect could be reused for serialization in this use
> > > case as well (assuming I can get some reviews on it.. ;).
> > > 
> > > FWIW, I was considering putting those quotaoff patches ahead of the log
> > > covering work so we could reuse that code again in attr quiesce, but I
> > > think I'm pretty close to being able to remove that particular usage
> > > entirely.
> > 
> > I was thinking about using a rwsem to protect the log incompat flags --
> > code that thinks it might use a protected feature takes the lock in
> > read mode until commit; and the log covering code only clears the
> > flags if down_write_trylock succeeds.  That constrains the overhead to
> > threads that are trying to use the feature, instead of making all
> > threads pay the cost of bumping the counter.
> 
> If you are going to do that, make it a per-cpu rwsem, because we
> really only care about the global shared read overhead in the hot
> paths and not the overhead of taking it in write mode if
> it is only the log covering code that does that...
> 
> > > I'm more approaching this from a "what are the requirements and how/why
> > > do they justify the associated complexity?" angle. That's why I'm asking
> > > things like how much difference does a dynamic bit really make for
> > > something like xattrs. But I agree that's less of a concern when
> > > associated with more obscure or rarely used operations, so on balance I
> > > think that's a fair approach to this mechanism provided we consider
> > > suitability on a per feature basis.
> > 
> > Hm.  If I had to peer into my crystal ball I'd guess that the current
> > xattr logging scheme works fine for most xattr users, so I wouldn't
> > worry much about the dynamic bit.
> > 
> > However, I could see things like atomic range exchange being more
> > popular, in which case people might notice the overhead of tracking when
> > we can turn off the feature bit...
> 
> Hence a per-cpu rwsem... :)

Yup, it seems to work fine, though now I'm distracted over the posteof
cleanup serieses... :)

--D

> Cheers,
> 
> Dave.
> -- 
> Dave Chinner
> david@xxxxxxxxxxxxx



[Index of Archives]     [XFS Filesystem Development (older mail)]     [Linux Filesystem Development]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux RAID]     [Linux SCSI]


  Powered by Linux